This patch changes some of the settings of the AS3515 to highest audio quality, similar to  FS#11304  but for AMSv1.

AUDIOSET2_IBR_DAC_50 → AUDIOSET2_IBR_DAC_0

0% reduction (instead of 50%) of DAC bias. This will probably increase power consumption.

Not set AUDIOSET3_IBR_HPH.

Increases HP amp bias. Recommended by the data sheet for 16Ohm loads (and will probably reduce THD).

Would be great if these settings could be changed during audio playback to listen for any actual changes in quality :)

Note: This is work in progress.
Status: Code implemented

      Manual not updated
      Wiki not updated (only after commit)

The idea of this patch is to have the same keyboard keys assign to the same actions in all platforms.

For example, have +/- keys (both on keyboard and on Numpad) are assigned to Volume Up and Volume Down keys of the original platform.
For platforms which do not have these keys, pressing the +/- keys in the simulator will do nothing.

This change will help developers to do manual regression testing on lots of platforms easily, as they do not have to memorize each platform’s key assignment.

Future development: Display key assignment on screen, and/or on console

A first port of espeak running on rockbox.
Warning: Only tested on Sansa player!

I have skipped some advanced features of espeak, for example:
- mbrola
- on the fly Translator language switching (try: ‘spring’ with german selected)

Because this plugin is very basic, there is no file input selection.
It always reads from the ‘test.txt’ in the root.
You have to unzip the espeak-data to the root of your player.

While I am playing some song on my iPod classic 2G, and scrolling through a list (even the main menu, but the glitch there is somehow different), if I unplug and then replug the headphones, some of the WPS UI gets drawn over the current view. I'm attaching a screenshot to make it more clear. It only happens while playing a song.
I'm using build bf6abf7 (most recent at the moment).
Also attaching my config.

This font is part of the WenQuanYi Project at [1]. It’s in Chinese, but there’s an english page at [2].

I’m adding this font because:
1. Currently there is no good Chinese font for Rockbox.
2. The best Chinese font (unifont) has unevenly sized Chinese characters, while this font has uniformly sized Chinese characters.

The attachments contain screenshots of the simulator, to show how this font would look like on the iPod Nano. I’ve also attached a screenshot using the Unifont font to show the uneven sizes of Chinese characters, for comparison. I don’t know about other languages, but I’d think other CJK languages work better in this font as well, due to the merging of WenQuanYi Bitmap Song.

According to the project[3], this font is made by combining the GNU Unifont (GPL), WenQuanYi Bitmap Song (GPL) and Fixed-16×8 (Public Domain) fonts. The maintainer of GNU Unifont also acknowledges this fact at [4].

This font is licensed under the GPLv2 with a font embedding exception[3]:

[quote]
** GPL v2 license with font embedding exception:

As a special exception, if you create a document which uses this
font, and embed this font or unaltered portions of this font into
the document, this font does not by itself cause the resulting
document to be covered by the GNU General Public License. This
exception does not however invalidate any other reasons why the
document might be covered by the GNU General Public License. If you
modify this font, you may extend this exception to your version of
the font, but you are not obligated to do so. If you do not wish to
do so, delete this exception statement from your version.
[/quote]

I don’t mind either way, but it would be up to Rockbox developers whether to strip off this exception. And either way, the font is compatible with Rockbox’s license (GPLv2).

The font I’m attaching is a modified version (and only the bdf); you can download the original version from [5]. My modification is:

— wqy-unibit.bdf.orig 2008-06-01 04:47:36.839752214 +0800
+++ wqy-unibit.bdf 2008-06-01 05:01:51.031748178 +0800
@@ -64,7 +64,7 @@
CHARSET_ENCODING “-1” CHARSET_COLLECTIONS “ASCII ISO8859-5 GB2312.1980 BIG5-0 KSC5601.1989-0 JISX0208.1997 ISO10646-1” ENDPROPERTIES
-CHARS 46443
+CHARS 46444
STARTCHAR uni0000
ENCODING 0
SWIDTH 500 0

This is because convbdf will emit a warning “Warning: DWIDTH spec > max FONTBOUNDINGBOX” when converting the font. This is because there are actually 46444 STARTCHAR entries, but only 46443 glyphs – the character “mu” is encoded as 181 and 956, with the exact same glyph. The generated .fnt file is exactly the same with or without my modification.

Additionally, this font is quite big so it’s a bit big on the screen of the iPod Nano. But it would be great on larger screens. Please take a look at the screenshots in the attachments.

Links:
[1] http://www.wenq.org/ [2] http://wqy.sourceforge.net/cgi-bin/enindex.cgi [3] http://www.wenq.org/index.cgi?Unibit_README [4] http://www.unifoundry.com/unifont.html [5] http://downloads.sourceforge.net/wqy/wqy-unibit-bdf-1.1.0-1.tar.gz?use_mirror=osdn

The database hangs when doing initialization if there is no music file on the player.

How to reproduce:
1. Install Rockbox.
2. Put some music files onto the device.
3. Initialize database.
4. Reboot.
5. Remove all music files from the player.
6. Initialize database.

This is an attempt to automate the setting of $PATH in tools/rockboxdev.sh, tools/configure and the generated Makefile.

The directory prefix of the cross compilers is stored in ~/.config/rockbox.org/RockboxCompilerPrefix. As the default path (in tools/rockboxdev.sh) is /usr/local, if that file is empty, then $PATH won’t be modified. Otherwise, the value stored inside that file will be read, the target platform type appended, and lastly /bin appended. The resulting string will be appended to $PATH.

This patch doesn’t break existing configuration. But it’s most probably incomplete, so please provide feedback on which files need to be modified as well.

Android:
The Notification bar which use "Remoteviews" may be not suitable for some ICS Roms (see Attachment).
So I change the Remoteviews to "Notification.setLatestEventInfo" to display the track information.

The patch may have some offsets.

Hi,

I have installed Rockbox build 0F89B04-160628 using this (https://files.freemyipod.org/~user890104/bootloader-ipodclassic.html) method.

I have created a dynamic playlist (Database > long select artist > current playlist > Queue Shuffled). Play and then pause the music and then hold the play button down to shutdown rockbox. Plug in USB cable from your computer (Win10) in to the iPod and the iPod should start powering on and then a white *panic* screen should appear.

Workaround is to have Rockbox already fully booted before plugging in a USB cable from the computer.

I use the attached custom WPS that displays the active Replaygain value and type next to the track number.

When playing mpc files created by foobar2000 with the tracknumber/totaltracks tag format, if the track# is 10 or higher and the applied gain negative (as in the attached mpc), mangled characters are displayed between the gain value and type, eg:

10/12 -2.00 dB *gibberish* (Album)

This is reproducible with the latest simulator build d0fffd6-150104 but I only recently noticed the issue and don't know when it began. I have an old sim build 935d8be-121229 and it works correctly there.

When playing music, I can hear codec errors in the music. It occurs every time on a certain song, and other songs that are smaller in file size, it does not occur on, but occurs on the next one. I believe it is a buffering issue, and makes the music unlistenable. I used the daily on 10/21/2015

On 320kb/s MP3s it occurs much more often, and 128kb/s MP3s it occurs less often, but when it occurs its a series of glitches that distort the music.

I am sure its not the MP3s themselves, because it doesn't occur in the official firmware, and when I rewind it, it does not make the same sound until later. It has a very prominent 'glitchy' sound and later it changes the speed of the song.

I replaced it with the 3.1.3 MP3 codec, and the same glitch occurs.

I do not have a line out so its made through the speaker, but the problem is so bad that you can hear it very clearly.

The MP3 was 320kb/s

Memo is the glitchy one, and Memo-1 is it being played correctly.

This patch is a continuation of FS#9879 and includes it (but adds something more). It adds the possibility to switch the lamp on and off without leaving the plugin.

Key mappings were taken from FS#8934.

Since FM stations list may require that the FM region is set to a certain value, it would be good if the FM region could be set along with the station list. The patch does just that.

The region is set by putting the line “region:N” into the FMR file (at any line there). N can be one of the values allowed for the fm_region setting.

The patch does not work on the simulators for e200 and h120 (the only two I tried) because, for some reason, the symbol HAVE_RADIO_REGION is not defined for them. Could anybody tell why?

Saving the region along with the station list is not implemented.

As of r21894, the pitch changing mode (in the pitch screen) can only be toggled (cycled through) in one direction. However it would be handy to be able to cycle in the other direction to change procentual vs. semitone while still staying in the time stretch mode. This patch adds such a possibility.

The key mappings is only defined for H1xx and H3xx (as a long press of Mode). Please add keys for other platfroms.

The patch adds two new WPS tags:

1. %Ln yields the number of the list item currently being drawn

2. The operator "/?" (which can be used in the %if tag) yields the string "div" if the first operant is divisible by the second and NULL otherwise.

With these two additions it should be possible to create themes where list items are coloured alternately (as an example).

The whole work has been done by gevaerts on 2011-09-12 (and all the credits also go to him), I only placed the patch to the patch tracker, changed the operator from "/" to "/?", and changed the function name from "skinlist_get_item" to "skinlist_get_item_number".

He posted the patch on the binpaste and it would be pity if it got lost.

Hello World :)
Attached is a VBR WMA music file, which fails to play correctly on my “RockPod” iPod Nano.
The same file decodes perfectly using the latest ffmpeg build.
Therefore I can only assume there is something about this file which triggers a bug in the Rockbox-specific WMA decoder.
Also attached is a microphone recording of the sound which comes out of my iPod when Rockbox attempts to play the faulty WMA.

I have over 3000 WMA tracks, all encoded using an identical method, all of which will not play correctly in rock box, so if you would like any more examples, or information, please ask.

Thanks for all your help :)
(If there is any way I can help debug/update the code for the wma decoder, please let me know where to start, I understand the C source code pretty well)

~Andrew

Added seeking by holdplus/holdminus buttons, pause/play by holdmenu button, hiding the OSD panel by briefly pressing power switch.

The config caused the iPod to appear frozen (frozen screen) after bootup. The iPod would boot, show the normal boot screen and then created a boot screen mixed with theme settings. Picture: http://imgur.com/E4srA the iPod refuse and refused to mount.

Fix:
1: Boot into recovery diskmode
2: Remove conflicting config.cfg
3: Reboot into normal mode

This patch adds a frequency response graph below the equalizer's controls, making it an EQ that is actually "graphical".

I'm still not sure about the accuracy of the represented curve, in particular the Q factor on the peaking filters seems to have an effect opposite to the expected, though the equations are taken from the same "audio EQ cookbook" the equalizer is based on, any help is appreciated!

The user interface is still incomplete, I want to add proper tags on the axes and bars. I also thought about re-enabling the theme on this screen (why is it disabled?) and change the behavior of the "right" button, making it consistent with other menus.

Tested on a Sansa e200.

“First Keypress Enables Backlight Only” doesn’t work on the 5G iPod. For example, if that’s enabled, the backlight is off and I press next track while at the WPS, Rockbox will go to the next track.

It seems like clickwheel event(s) generated when I touch the wheel turn on the backlight. When the button is pressed, the backlight is already considered to be on and the button press performs its usual action. If I carefully hold my finger still on the clickwheel, let the backlight fade, and then carefully press a button without moving my finger on the clickwheel, I am able to turn on the backlight without causing anything else to happen.

I don’t know what to do about this. Requiring a physical button press might be annoying. Removing this option on affected targets might be okay, because it’s easy to turn on the backlight by touching the clickwheel (and that doesn’t seem to cause anything else to happen). Another possibility is to require more or specific wheel events.

I set player type to iPod 5G because that’s all I have, but I expect this problem also exists on other clickwheel iPods. This problem exists on r20079 and r20033.

With my 5th generation iPod, if I connect USB while the hard drive is spinning, I often get full speed mode instead of high speed mode. This testing is with 00b8563, but I’ve observed the same problem in the past. Here’s the relevant part of Linux 3.8.0-21-generic dmesg output:

[26644.712035] usb 2-2: new high-speed USB device number 18 using ehci-pci
[26644.904471] usb 2-2: device descriptor read/all, error -71
[26644.965905] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.967780] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.968004] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.971577] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.973440] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.973459] hub 2-0:1.0: hub_port_status failed (err = -32)
[26645.176048] hub 2-0:1.0: unable to enumerate USB device on port 2
[26645.428038] usb 6-2: new full-speed USB device number 8 using uhci_hcd
[26645.979070] usb 6-2: not running at top speed; connect to a high speed hub
[26646.009069] usb 6-2: New USB device found, idVendor=05ac, idProduct=1209
[26646.009076] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26646.009080] usb 6-2: Product: Rockbox media player
[26646.009083] usb 6-2: Manufacturer: Rockbox.org
[26646.009087] usb 6-2: SerialNumber: 100000000000A270014B32BEB
[26646.024242] scsi21 : usb-storage 6-2:1.0
[26647.038109] scsi 21:0:0:0: Direct-Access TOSHIBA MK3008GAL BU11 PQ: 0 ANSI: 4
(I’ve removed the remaining USB storage messages because they don’t seem relevant)

If the hard drive is not spinning, I get high speed mode. However, there is a disconnect and the device is detected twice:

[27356.784126] usb 6-2: USB disconnect, device number 9
[27371.208044] usb 2-2: new high-speed USB device number 24 using ehci-pci
[27371.347053] usb 2-2: New USB device found, idVendor=05ac, idProduct=1209
[27371.347058] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27371.347062] usb 2-2: Product: Rockbox media player
[27371.347065] usb 2-2: Manufacturer: Rockbox.org
[27371.347069] usb 2-2: SerialNumber: 100000000000A270014B32BEB
[27373.079038] scsi25 : usb-storage 2-2:1.0
[27373.337244] usb 2-2: USB disconnect, device number 24
[27373.640029] usb 2-2: new high-speed USB device number 25 using ehci-pci
[27373.779220] usb 2-2: New USB device found, idVendor=05ac, idProduct=1209
[27373.779226] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27373.779229] usb 2-2: Product: Rockbox media player
[27373.779233] usb 2-2: Manufacturer: Rockbox.org
[27373.779236] usb 2-2: SerialNumber: 100000000000A270014B32BEB
[27373.820382] scsi26 : usb-storage 2-2:1.0
[27374.823266] scsi 26:0:0:0: Direct-Access TOSHIBA MK3008GAL BU11 PQ: 0 ANSI: 4
(Again, I’ve removed the remaining USB storage messages because they don’t seem relevant)

I get the same behaviour regarding high speed vs. full speed mode in Windows 7, but I’m not aware of Windows reporting other USB errors anywhere.

I was sometimes having USB difficulties that seemed to be due to contact oxidization or dust from not using the dock connector in a long time, but I don’t think that’s the cause here.

I’m attaching USB traces from WireShark using Linux usbmon. In both cases I removed all the USB mass storage stuff after get max lun because it seems irrelevant and increases file size a lot. When the result is full speed, something goes wrong after the set address response. When the result is high speed, something goes wrong after the set configuration request. In both cases the first sign of trouble is an interrupt from the USB hub.

This is on a Gigabyte GA-P35-DS3R rev V1.0 motherboard with Intel P35 + ICH9R chipset.

Player = Sansa ClipZip
Rockbox current build :

It would be useful to change the configure and voice.pl files in order to allow the user to choose also the Loquendo and ViaVoice TTS

I have been using Rockbox for almost 2 years now on my X5L together with the remote and I have frequently updated to the current version, so I am familiar with how it works.

I have noticed that after updating to version 20090221, my X5’s remote’s LCD behaves erratically (strange lines being displayed all over, vertically shaky image) right after booting Rockbox, then the display turns off completely after a few seconds. Strangely though, the controls still work and the blue display light comes on when working the controls, but the display is turned off (there is nothing being displayed, as if the player were turned off). If I unplug and reconnect the remote, the remote’s LCD comes on, but soon turns off again. The X5’s main LCD is working just fine.

I thought that my remote was dying on me, but decided to check if it was somehow related to the development of Rockbox. I reverted back one build after another and found that the last build that works OK for my remote is 20090210. So, in all the builds starting with 20090211 (I have thoroughly checked all from 20090211 to 20090225), the remote is practically unusable. I looked at the changes done on that day (http://www.rockbox.org/daily/changelogs/changes-20090211.html), but could not single out the probable cause.

Great software, anyway!

This patch adds a couple more lines to Track Info for Play Count and Rating.
Currently these don’t seem to show up anywhere else.

Tested against r26427 with Fuze v2 and USim.

Hi all.

I have found a funny thing, which should get fixed. In set_prescaled_volume there is this call:
audiohw_set_lineout_vol(tenthdb2master(0), tenthdb2master(0));

As far as I can see this call is not needed here. So this patch removes it, but as I own only a sansa e280 I can not test this change. I hope to commit this soon.

If this call is needed… do we need it every time audio changes or only once at init?

Thanks,
AustrianCOder

Hi,
I am using a Sansa Clip Zip with Rockbox 3.13.
I’ve noticed, when I lock or unlock the device, the message, which indicates the current state, does not disappear completely. Its still there.

Cheers,
Conrad

I was reading http://forums.rockbox.org/index.php?topic=17079.0 and thought I’d take a swing at it. So far, I have added (potentially shaky?) support for the ‘#’ comments in the file posted, allowing both Windows and Linux line ending formats, and longer filename support.
Still having problems with the white space after each entry, and detecting or assuming the presence of the file extension.

Some improvements for voicebox on windows. Mainly an option to voice file extensions. Not perfect yet. Instead of an option to voice file extensions there are two voice files options in the hta file. Anyone know what is wrong with this?
Thanks

Update to my tools/talkclips.py script. Minor updates which include:
- Better handling of logfile eg. we don't leave it open as was the case
before
- Report a few more details in the log eg. start/end time, duration, and
number of talk clips created. This is useful to dettect how many files
had problems…
- Summarise output for user at end, of processing, number of talkclips
created and how long this took (in seconds).
- Report to user how many talk clips will need to be created to give
them an indication of potential waiting time etc. This is calculated by
first determining how many files are on the device excluding .talk files, and how many .talk
files there are, and calculating the difference.
- This information allows a percentage indication to be drawn throughout
the script, so now the user can track the percentage as processing takes
place.

Patch is attached.

Thanks.

Dumb patch but introduces handling for non triangular faces (by triangulating them when rendering). Vertices courtesy of http://mackayj.doosh.net/eliteships.html (in particular I hand-converted http://mackayj.doosh.net/files/vrml/eliteships/cobra3.wrl)

This bug currently exists as of rev 21444.

If settings are modified on the recording screen they aren't persistent after a reboot unless another setting is changed somewhere in the menu system.

The problem is that global_settings is being modified without a subsequent call to settings_save().

Attached is a fix for this problem. I've so far only tested it on the h1x0 simulator but I think it's a pretty benign change, unlikely to cause problems on other targets.

This is a first attempt at creating an entry for the new fft plugin. The button table was automatically generated with the attached python script.

The script takes a file (or - for stdin), looks for an #ifdef CONFIG_KEYPAD….#endif block and if it finds one (and it is relatively simple), it parses it and creates the corresponding LaTeX table.

The script is extremely simple but it does provide a good basis for further work.

On my Sansa Clip+ 4GB, with Rockbox v3.11.2

Recording a wav file through internal microphone. If the audio signal clips at the positive limit, bad things happen:
1) Most of the time the recorded signal wraps around to a full scale negative value, which makes it sound terrible.
2) Sometimes the recorded signal wraps around to a near zero value, which still makes it sound terrible but the distortion is not so loud

3) Clipping at the negative end of the range is as you would expect - a flat line which sounds like normal digital distortion, as you would expect

See attached picture of the recorded waveform showing each of the 3 situations described above.

This patch adds a %ch tag that returns the number of channels in the current file.

Unfortunately, the large majority of codecs don't fill in this field in struct mp3entry. In the codecs covered by the rockbox testfiles collection, only atrac, cook and tta actually work.

I don't think it makes much sense to commit this with so few supported codecs, so help is appreciated on the codec side of things

On my Sansa c250v1, the starfield plugin crashes at the address 0x01F80394 with a data abort.
It seems that the plugin is attempting to execute data.
Strangely, it does not happen in the simulator.

When recording, as file size reaches 25.2MB and again at 52.4MB respectively, disk thrashing noise drowns out the recording for about 2 minutes.
This occurs at about 27.5 minutes if recording as mp3.
And about 5.25 minutes if recording as wav.

I am assuming that Rockbox is filling a cache and then dumping the file to disk all at once.

I would expect it to write quietly. Even if it where to write on the fly, the noise would be reduced to short bursts. 2 minutes of interruption is just not acceptable. I missed out on important information during those 2 minute periods.

How can we eliminate write noise altogether? Or at least in the recording itself.

Select ‘FM Radio’ Choose your station.
Then from the menu select ‘Recording’ Press ‘play’ or ‘Rec’ to begin recording.
Wait for file size to reach about 28MB. Then stop.

I can also provide recordings if necessary.

*note: I also had the USB cord attached to give better FM reception.
tested on e260 & e280
Rockbox Version: r15988-080102

Thanks

Consider the following theme markup:

%Vl(progressbar,306,156,10,80,-)
%pb(0,0,10,80,progressbar.bmp,vertical)

That draws a vertical progress bar that will get filled from bottom to top. When a song starts to play, the progress bar is one pixel high, at the correct position (at the bottom of the viewport). That 1px-high image quickly jumps up one pixel (moves up by one pixel), then comes back down one pixel (at the correct position) whenever the progress percentage is high enough. The progress bar then displays normally and grows as the song is playing. See attached screenshots.

Expected behavior: the position of the progress bar (relative to the viewport) should not change. The bug has been observed in the iPod Classic and Clip Zip sims (builds 1bc89bd and 77bfff5) as well on the actual devices. Inverting the progress bar (with the "invert" parameter) shows the correct behavior (inverted bar with no such glitch).

Affected themes: Ash (iPod Classic), SugarBrown (Clip Zip).

It's Seems to be no support for RTL languages like Hebrew and Arabic in rockbox for android.
Instead of מוסיקה written הקיסומ (in English - Instead of "Music" written "cisuM).
I attach pictures for example:

The scrollpad on the H10 (20gb, not sure about 5/10gb) has always bothered me with being jumpy, inaccurate, and unintuitive. At the moment (in rockbox) it seems as though it is working as a simple two button device (up/down), with no real dragging capabilities. I am wondering if this is a limitation of the hardware or current software implementation.

The original firmware seemed to work as follows:
split slider into upper and lower field. Tapping in either upper or lower half would create click-type event for up/down. Dragging in upper half would produce scroll up, draggin in lower half would produce scroll down events. The problem was that upper and lower halves are really kinda arbitrary and not easily distinguishable.

What I think would work nicely:
Tapping top and bottom, as before. Remove upper and lower restrictions for dragging, i.e. if dragging down (anywhere on the scrollpad) create scroll down event, if dragging up (again, anywhere) create scroll up event. Drag and hold will scroll in desired direction proportional to the drag speed (as in pushing a puck on ice). Hold (just hold, no tap or drag) on the touchpad creates a sliding value that can be used as a coordinate for different types of continuous input.

To implement this, we’d need some kind of knowledge about what signals the actual hardware provides, what resolution the pad has, i.e. what the physical and logical implementations of the device are. I am not sure how the Ipod scrollwheel works, but it seems that some of that code could be re-purposed, maybe?

Hacking from Antoine Cellerier’s code for solitaire.c, I put together a rough freecell game.

It currently works for Sansa E200 targets. Others should work once button mappings are done.

This is not heavily tested, so feel free to report or fix any problems you encounter.

Rockbox WebOS app.

Built on r31467, 32/64-bit Ubuntu 11.10, running on a 32GB Touchpad

Directions (only tested on the above):

* Install WebOS PDK: https://developer.palm.com/content/resources/develop/sdk_pdk_download.html

* Install platform-native libsdl-dev if you haven't already. Only needed to pass configuration check as the PDK doesn't properly install staging sdl-config for some reason.

* Apply patch (patch -p0 < filename.patch)

* cd webos

* ../tools/configure, select WebOS target (206)

* make && make install && sh ./buildpkg.sh

Notes:

* This is one big hack – I fudged just about everything in /firmware (how the target system works is still not altogether clear to me) and piggybacked a lot of this off of the SDL target. Mostly in the interest of getting it to run without adding ifdefs all over the place. Obviously we'll want to be more methodical and thorough about exactly which changes need to go where moving forward.

* The Touchpad's SDL video implementation appears to adjust orientation and scale output to fit within 1024x768 as best as possible. This means that a 800x480 build will appear in landscape mode, letterboxed, while a 320x480 will appear in portrait mode, pillarboxed. The device itself automatically orients to landscape – meaning, if you're in a portrait resolution and then you exit, everything will initially be sideways – but that doesn't affect input. Scaling routines are noticeably slow.

* I tried building this as a hybrid Enyo/PDK (window mgr friendly) app but had some problems with the native part failing to execute at SDL_Init. So for now no backgrounding or notification bar.

* Make scripts use the ARM compilers installed with the PDK. I'm wondering though if this is superfluous given that the Rockbox toolchain also supports ARM7. I did try exposing some of the ARM-specific assembly but the compilation failed with the PDK compiler.

800x480 build: http://www.jasonyu.net/webos/org.rockbox.raap_0.0.1_all.ipk

I tried to make the first shot on adding fm radio support for the Samsung YH-* devices.

–

I got no SD-Card support for my E-250 after boot into USB mode.
I plug in my powered off player into usb and only have access to internal storage.

If i plug in my player booted up there is no problem.

I am using daily build r29174-110131.

I’d like to suggest the following new WPS feature(s):

1. A viewport can be assigned an image as a “backdrop”.

 a. A viewport may be assigned an image dynamically via the WPS tag "%VX<identifier>"
   (i.e. %VXa for image a, %VXZ for image Z, etc.)
  b. As a viewport is being processed and drawn, its backdrop would be drawn "first", followed by any other normal images/characters.

2. Viewport may define FF00FF as a background color, which would then be “transparent”. This would allow overlapping viewports.

3. Fonts drawn in a viewport with a backdrop would automatically be drawn with DRMODE_FG.

Notes on the attached patch file:
+ It was created from the SVN revision 18997 on Nov 3, 2008.
+ Although I stubbed in the new functions for all the LCD drivers, I’ve only flushed out the 16 bit driver so far.

Cheers!

This is the first plugin I’ve ever written from scratch, and well, it was fun. I haven’t worked out how to use bitmaps yet, bear with me, for now it uses coloured rectangles. Still learning :p.

If this were to get committed, please wait until I’ve added better support for more targets, commented as many lines as are possible to help other people new to making plugins, potentially add AI (Although that would kinda ruin it as it would probably force a draw every time), and figured out how to use bitmaps properly.

If people are willing to test this out for me and tell me any bugs, please do so. I have tested this on the H10, the Gigabeat, and, using the simulator, the iPod mini G2 (Which displays it but out of alignment, will work on that soon.

I realize it’s not too exciting, but for my first real bit of work in C I’m happy :p.

Using a bootloader from  FS#9955 , a USB connection is not made if Start Screen is set to WPS, and the user boots Rockbox by inserting a USB cable.

This is possibly also true for other values of Start Screen.

Tested on e280, but I expect it’ll likely be the case on other PP targets with USB

at least in the 16bit lcd drivers, all functions which use transparency (or clear pixels) get the pixel colour from the backdrop image, completly ignoring the bg_pattern.

This isnt a problem except in skins where it is perfectly reasonable to want a background image for most of the screen but a solid colour for one or two viewports.

There is a tiny problem though, bg_pattern is set to LCD_DEFAULT_BG which is a valid colour, so we probably need to add a flag to the viewport struct to say if it should ignore the background image or not.

Rockbox 3.1.3 on Clip+ (also iriver h140/340. also previous versions of rockbox).

Some HE-AAC files play back at half speed.

Example file info (comment/lyric fields removed as very long):

General
Complete name : Witness_-_The_Khmer_Rouge_take_power.m4a
Format : MPEG-4
Format profile : Apple audio with iTunes info
Codec ID : M4A
File size : 4.09 MiB
Duration : 9mn 0s
Overall bit rate mode : Constant
Overall bit rate : 63.5 Kbps
Album : Witness
Album/Performer : BBC Radio
Track name : The Khmer Rouge take power
Grouping : News
Performer : BBC World Service
Composer : BBC iPlayer
Genre : News
Recorded date : 2013-04-18T08:50:00+01:00
Tagged date : UTC 2013-04-18 09:07:25
Writing application : Lavf55.0.100

Audio
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : HE-AAC / LC
Codec ID : 40
Duration : 9mn 0s
Duration_LastFrame : -1ms
Bit rate mode : Constant
Bit rate : 62.7 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz / 24.0 KHz
Compression mode : Lossy
Stream size : 4.04 MiB (99%)

30 second sample attached (cut with ffmpeg, full metadata)

Forum report http://forums.rockbox.org/index.php/topic,43012.0.html

Bomberman like game with ai.
Not finished yet - lots of bugs and things to be done are known :)
Tested on Cowon D2 and also on some simulators with the same screen size (will work on other screen sizes too, but not now).
Somebody test it on iPod Video and on Zen Vision:M please.
Any suggestions greatly appreciated!
Hope the patch will work…