Rockbox

I'm running Rockbox 3.11.2 on a Sansa Clip+.
I followed these steps:
- go to the Main Menu
- Files
- long press on <microSD1>
- Playlist Catalogue
- Add to New Playlist
I tried to save the playlist with a long press of the select button (not sure of the button's actual name; it is the button in the middle of the 4-way controller and the one that is usually used to select the highlighted option). I was returned to the Files menu. The playlist did not get saved, and there was no error explaining why.

As a result, I spent a long time assuming that long press of select was a "cancel" action, and tried short and long presses of every other button trying to save the playlist.

Workaround: instead of accepting the suggested filename, remove the "<" and ">" characters from the auto-entered filename ("/Playlists/<microSD1>.m3u8") to be able to save the playlist.

Suggested fixes: The filename suggested by Rockbox should not include "<", ">", or other un-saveable characters. In addition, if the user tries to save a file with invalid characters, a warning or error message should be posted (like the "Cancelled" message that briefly pops up when the power button is pressed to exit from the set-filename screen).

As the title suggests, fun things like: https://plus.google.com/102855057878446061693/posts/FkQ4wQZb8VD can happen in this instance.

Initially reported here: http://www.rockbox.org/irc/log-20130113#07:14:49

[Saint]

Key lock (activated by pressing Power in the WPS) deactivates when music playback stops (end of playlist). The keypad then becomes active again. It shouldn’t get activated until Power is pressed again.

I would like to leave my player charging overnight and have it resume playback in the morning to wake me.

My player remains on when charging and cannot be turned off.

The alarm does not resume playing if the player is already on when the alarm time passes.

I suspect this probably applies to all players, mine is a Sandisk Sansa Clip+.

Rockbox info says v. 3.13 - the stable build grabbed by RockboxUtility, which this bugtracker doesn’t seem to know about yet.

I’m using the latest Dev build for the Fuze+. SanDisk Sansa Fuze+ 5ef1e2d. Same issues experienced in v3.12 stable.

The screen, for lack of a better term, jumps when navigating in upside-down mode.

http://youtu.be/dRfiBtMx2to

Rockbox version 3.13
Wenn I delete a file being played, it continues to play (which is OK for me). But when I rewind in this file while playing, Rockbox hangs and does not respond to any key presses. The screen light stays on. I have to press the hard reset or wait until the battery is empty.

This also sometimes happens when I press fastforward, but it always happens when pressing rewind.

Desired behavior:
- Preferred: permit rewinding/fastforwarding (and really delete the file only after stopping the replay)
- ignore rewind/fast forward; alternatively
- skip to the next file immediately after deleting.

Thanks for reading, and please contact me if you cannot reproduce this! I have a Iriver H140 and I must say that all my recordings are in wavpack (recordings made using SPDIF-IN), so I do not know whether this also happens with other file formats and with other players.

-Stefan

Revision a8758c9 and Stable (3.13)

If you use the Hold Switch to Lock Keys and remove it again to unlock, buttons doesn't work.
Move around with finger at touchpad work. After this bottons work without problems.

Short:
Start Rockbox
Move the curser over Settings (Example)
Move Hold switch to Lock
Move Hold switch to Unlock
Press Middle Button (Doesnt work)
Move around on Touchpad
Press Middle Button (work)

Rockbox doesn't speak in the FM mode with voice configured. I tried it in my local language (spanish) and in english with same results. Apparently it is not a problem of the translation, because sometimes (only 2 or 3 times in at about one year that I'm using the player) the player speak some words. This works correctly in release version.
My actual version is 0f89b04, but it happend in all dev versions.

On my X3, it triggers the MIPS equivalent of a segfault. (directory has 792 entries, tried to access it with only 500 allowed)

Rather than crashing outright, I think it would be better to detect this and somehow error out gracefully?

Create database application.

1) At first FS9349 patch file (http://www.rockbox.org/tracker/task/9349?getfile=17401) apply.

2) After this task’s patch apply.

Update to my tools/talkclips.py script. Minor updates which include:
- Better handling of logfile eg. we don't leave it open as was the case
before
- Report a few more details in the log eg. start/end time, duration, and
number of talk clips created. This is useful to dettect how many files
had problems…
- Summarise output for user at end, of processing, number of talkclips
created and how long this took (in seconds).
- Report to user how many talk clips will need to be created to give
them an indication of potential waiting time etc. This is calculated by
first determining how many files are on the device excluding .talk files, and how many .talk
files there are, and calculating the difference.
- This information allows a percentage indication to be drawn throughout
the script, so now the user can track the percentage as processing takes
place.

Patch is attached.

Thanks.

The aim of this patch is to make releases as simple as possible... i.e the end goal would be to have someone run “$ ~/rockbox/tools/release/release.sh 3.3” and that would do everything except feed the cat...

the first version just modifies bins.pl to accept a version number which eventually gets passed to the Makefile and used in the source to set the version string in the source to “3.x-rBLAAA”.

This also defines RBRELEASE which can be used in the source to do stuff, for example, remove the debug menu in releases (if we decide to do that...) (RELEASE is defined in speex so had to add the RB prefix...)

Also, this changes the way configure is run to use command line args instead of passing input to it which is Just Wrong (TM) :p

Emuriver is an emulator (not simulator) for iriver ifp-7xx series. It’s part of the http://www.rockbox.org/wiki/IriverIfpPort and has until now been hosted at the main author’s (Tomek’s) site http://www.mimuw.edu.pl/~tmal/rockbox/ It includes a tool to create flash images for use with the emulator, and a tool to mount such images and do basic file management on them.

This version is almost identical to the last version from Tomek’s site, but I had to fix a few bugs to make it usable on my system. Changes are as follows:

flashimgtool.c: Outputs usage information on errors. (I didn’t do this; I don’t know where this code came from but it’s useful.)

hardware.c: Bug: Arguments were missing in a function call which would sometimes cause segmentation faults, and (I don’t know why or how) slow down the emulator.

main.c: Changed a default file name from prog_flash.bin to prog_flash.img (I didn’t do this)

main.c: Bug: Added explicit return value to nonvoid function. The implicit return value was sometimes -1 which indicated an error so emuriver aborted.

make_flash_img.c: Optimizations: “if” replaced with “else if”. (I didn’t do this)

uicurses.c: Rename a variable into someting more unique. (I didn’t do this)

The reason I’m submitting this patch is that I think the emulator could be useful as it is for those trying to build the ifp port from SVN, that it could (maybe) be worked on to support other players, and that my bugfixes should be included for those building emuriver.

There are a few issues: The flashimgtool subdir in emuriver duplicates a few (three years old) files from RB, disk.c, fat.c, and some more. You might not like the directory structure. It uses an ancient version of autotools. I haven’t been able to create flash images that actually work with flashimgtool. I haven’t built the RB port for ifp yet, so I don’t know if it will run in emuriver or not.

Yes I have discussed the patch in IRC.

The attached patch fixes a minor compiler warning on 64 bit platforms.

Neither of the tools, ipodpatcher or Rockbox Utility 1.4.0, work on macOS Catalina.

Catalina removed 32bit support.

Using ipodpatcher generates the following error:

bash-3.2$ ./ipodpatcher
bash: ./ipodpatcher: Bad CPU type in executable

And Rockbox Utility has a white circle with a line through it indicating that it does not work with this version of the OS.

(see attached file)

The following set of WPS tags demonstrates:

# WPS Document
%wd
%V(0,0,-,10,2)%Vb(000000)%Vf(FFF000)
%aL%cH:%cM %ac%pv %aR%bt
%V(0,11,-,30,2)%Vb(000000)%Vf(FFF000)
%it

If you alternately insert and remove a space between the second occurence of %Vb/%Vf, the track title text appears and disappears. It appears to happen in a few other variations, but this is the shortest concrete example.

Whenever screendump is enabled,It gets a panic error.
Error Message:
*PANIC*
Stkov usb
pc:080739ac sp:080f5458

This patch adds SubRip subtitle support to MPEG Player.
http://wiki.multimedia.cx/index.php?title=SubRip

Files need to have the same name as the video file with a “.srt” extension.

I know that the OSD rendering is not implement in a way that linuxstb and jhMikeS would like but I still wanted to post the patch here in case anyone felt like adapting it. (Current OSD only renders on top of the video area, it can be adapted to add other OSD channels … like display a seek bar, volume control, playback state, etc.)

Enjoy,

Edit: I’ve also added a timebar display (when changing the volume)

Right now if the voice file fails to load, there’s a splash message but blind users won’t be able to see it.

(usually this happens because they upgraded rockbox without upgrading the voice file too)

It would be useful if we could embed a failsafe voice file, containing only that one prompt, so the user will know what is going on.

Just English for now, though ideally one for every language we support.

(Oh, and a pony too. Please?)