When listing to a mp3 for some time there starts a massive random noise in the background. It will continue for some time when pausing or stopping playback and will also continue when starting another track.
I’ve noticed this when listening to a random list of mp3s of various sources and using speedup with 225% or 250%.

At the moment I’m using ee758c5 with my clip+.

First noticed the issue in the previous dev build, and just confirmed in 15fa7f8.

When playing .opus files, no metadata is displayed. Some files (92kbit stereo music files so far) do play fine otherwise. Others induce crashes upon attempting to play. An example is attached.

First test, I played a couple of music files successfully, then tried to play the attached file. System crashed immediately showing the following:
“Undefined instruction
pc:30000002 sp:300632[display cuts off here]
bt end”

Powered off, restarted, and tried to play the attached file immediately. After a second or so of audio, player crashed again:
“Undefined instruction
pc:08180002 sp:302029[display cuts off here]
bt end”

On the previous dev build, I was getting similar errors if I tried to play the attached file (or several other similar ones) after successfully playing other files, but would get a black-screen crash if I tried to play it immediately on powerup (this is not what is happening on 15fa7f8).

I am NOT experiencing these problems on another AMSv1 player (Sansa c240 [”c200v1”]) with the same dev build, so this may be specific to the Clipv1. On the c240 with both the previous build and 15fa7f8, metadata displays fine and the attached file plays without any apparent error.

After playing a few opus files (~128 kbps) the system becomes so unresponsive that it cannot decode the file in real time, and the device cannot respond to any input within a reasonable timeframe (have to hard power off).

This does not occur when you set the cpu frequency beyond the highest setting in the debug menu!

To reproduce:
play opus files in a playlist with normal cpu scaling
on beginning of 2nd or 3rd file, system will become unresponsive.

http://www.konscience.de/wp-content/uploads/kns017-maertyrer-gegen-copyright.m4a

The current build as well as 3.13 report and then fail:

parsing /kns017-maertyrer-gegen-copyright.m4a failed (format: ALAC)

However, foobar reports:

Codec profile : AAC SBR

Which is likely correct given that the bitrate is far too low to be ALAC.

There is an ALAC playback problem in daily builds (since 2014-11). The playback somethimes works for one song but then crashes and shows ALAC file details as "? kbit/s", "0 MHz", "0 MB" and nothing happens when I press the Play button. After reboot the problem occurs again. It makes the ALAC playback impossible.

Now I'm using revision 9cb9f76M-140326 with patches from aroldan:

https://www.dropbox.com/sh/b5xbw6cp4ikfxwn/MjELjmDNJ_

With this build there are no ALAC playback problems.

When playing music, I can hear codec errors in the music. It occurs every time on a certain song, and other songs that are smaller in file size, it does not occur on, but occurs on the next one. I believe it is a buffering issue, and makes the music unlistenable. I used the daily on 10/21/2015

On 320kb/s MP3s it occurs much more often, and 128kb/s MP3s it occurs less often, but when it occurs its a series of glitches that distort the music.

I am sure its not the MP3s themselves, because it doesn't occur in the official firmware, and when I rewind it, it does not make the same sound until later. It has a very prominent 'glitchy' sound and later it changes the speed of the song.

I replaced it with the 3.1.3 MP3 codec, and the same glitch occurs.

I do not have a line out so its made through the speaker, but the problem is so bad that you can hear it very clearly.

The MP3 was 320kb/s

Memo is the glitchy one, and Memo-1 is it being played correctly.

Create silence in Audacity program (Generate → Silence). Convert the wav file to ogg vorbis file. Put into the sansa clip+ player wav and Ogg files. Turn on the equalizer and set 32 hz, 64 hz, 125 hz in the 0.5-2.0.
Turn on maximum volume. Listen to the silence of wav file. Absolute silence. Listen Ogg Vorbis file - hear the noise (like the wind). It’s bug with only ogg vorbis. mp3, flac, mp4 is absolute silence.
On a musical files it’s additional noise. Ogg vorbis is economical of disk space. Testing on a sansa clip+ with 2GB.

I primarily use my unit for audio books while driving, but the latest build (as I write this) won't play one of the files properly. It tries to start, stuck at 0:00. Trying to seek hangs the player altogether, requiring a hard restart.

I've recreated this problem on a flaky Clip+ and an AGPTek Rocker.

The 'file' tool identifies it as: ISO Media, MP4 v2 [ISO 14496-14]

Here's what mplayer has to say (while playing it back properly):

[lavf] stream 0: audio (aac), -aid 0, -alang eng

Please refer to forum post for full exchange: http://forums.rockbox.org/index.php/topic,52518.0.html

In summary playing ALAC will crash the unit, other codecs not as much. My reasoning is (as contained in the forum post):

Converting some of my ALAC collection to FLAC to test has given excellent results = no crashes. I am suspicious of the ALAC decoder; watching the VIEW BUFFERING THREAD there seems to be consistency:

OGG/MP3/FLAC/WAV: CPU Frequency goes up to 124 until pcm: becomes full, then drops to 45mhz and pcm: hovers (it is always active) near the top of 100%. Upon track change the cycle starts again (124mhz until pcm: becomes full). I don't seem to get crashes.

ALAC: CPU Frequency goes up to 124 until pcm: becomes full, then drops to 45mhz and pcm: quickly goes down (takes about 2 seconds) to 75%, then cpu switches to 124mhz to get pcm: back up to 100%. This goes on constantly (cpu high - low cycle) while a single track/file is playing. I am now believing this cpu going up and down constantly gives me the crashes. Note on crashes: I don't know when they will happen, sometimes after a minute or two, sometime after 10 minutes , there is no pattern I can tell.

Playing APE 24/44.1 with harsh noise in different parts of the track. If you decode APE file to WAV using the codec console, then there are no problems. So the matter is in the player’s APE decoder.

At 24/48 everything is fine.

On the Sansa C240 V1, to switch on the line level audio output on the dock connector pin 8 needs to go high. So jumping 3V+ from pin 22 will activate the line level audio. This works fine with the Sansa firmware but Rockbox produces no sound through the line level outputs on the C240, with pin 8 jumped or not jumped.

Setting the Idle Poweroff setting seems to work just fine initially because the player ceases to respond to any input. However, when you push the power button back up to turn it on, the screen lights up and says “Shutting down…” for a few seconds before actually powering off. You then have to push the power button back on to turn it on proper.

Hello, here's my current contribution to the Rockbox project: initial work on a port to the Samsung YP-P2. Right now, it's mostly just copied from the Cowon D2 port, but with some changes to reflect the P2's different LCD.

The LCD shows the picture undistorted, but it seems that the G channel is too strong. Perhaps this is due to the LCD being set to rgb666 mode, so it expects 6 bits from R and B, while Rockbox only gives 5 bits? I tried setting the LCD to rgb565 mode, but that only distorted the colors even more. In any case, suggestion for a fix would be great.

Build is r23841 and earlier.

Occasionally when I reboot to the iPod firmware, something has caused the previously unset alarm setting to be enabled and the playback mode is set to shuffle. This doesn't happen with every reboot, but does more than 50% of the time.

Steps to duplicate:

1. Disable the alarm and set the shuffle mode to "None" in the iPod firmware.
2. Reset and boot into Rockbox
3. Listen to a few tracks
4. Reboot into the iPod firmware and check the shuffle mode and alarm settings.

I can't confirm 100% yet as to the time on the alarm being reset as well, but it does seem to consistently read 6 AM - which is a bit of a shock if I've been listening in Rockbox during the day and then I reboot into the Apple firmware and dock in my iHome, expecting to sleep in late on the weekend.

Added new menu item under Settings.General.System, to select whether USB cable connection enters charging mode by default, or data transfer mode.

By default, the option is set to "No". Meaning, in order to have RB enter charging mode, a specific button should be pressed by the user.

If the option is set to "Yes", USB connection causes RB to enter charging mode, unless the specified button is pressed, causing RB to switch into data xfer mode.

Here’s a patch to version r29143M-110324 that adds the Zipit Z2 as a build target. It requires one new file (also attached) firmware/target/hosted/zipit/powermgmt-zipit-z2.c to monitor the battery.

This is mostly a generic SDL app with a few tweaks for the Zipit buttons and battery monitoring. The patch also includes a few small bug fixes for SDL app builds. I had to fix the labels in the asm section of lcd-16bit.c. There were some missing parenthesis on an #ifdef in button-application.c. And the apps/SOURCES file needs an #ifdef to handle an SDL app build without touchscreen support.

The iPod Classic Cirrus CS42L55 DAC+amp chip is specified to output audio up to +12dB versus the reference level (0.775V RMS) and the current Rockbox driver implements this accordingly (note that the OF limits the amplification to a lower level).

However, any amplification above +3dB applied to a 0dB signal results in serious clipping errors, the sound being distorted (oscilloscope measurements attached). This is not a surprise, given that +12dB translates in over 8V peak-to-peak output, way above what the iPod is capable of with its 3.7V battery.

Distortions aside, +12dB can be overkill for most of the earphones (depending on the sensitivity) and not a very pleasant experience. If you put the iPod in your pocket and forget to lock it you may experience this frequently.

In practice not all tracks have peaks reaching the 0dB level (actually nowadays this is quite common given the "loudness war"). To provide some room for additional amplification when needed, I found the +6dB limit to be a good compromise.

After a lot of trial and error I found out the following.

It appears that 3.10 on my Clip V2 writes a bad nvram.bin file. When I try to set another interface language, my Clip freezes. It does not react to input and the clock in the top line doesn’t update anymore. The FM radio kept on playing though. I haven’t tried all available settings in the menu, just the ones I occasionally use. But the problem never occurred anywhere else, just upon selecting another language.

When I delete nvram.bin, I can set a language. Then I switch the Clip off and on again, and the problem comes back.

See attached the nvram.bin which causes a freeze.

PS.: No Sansa Clip in the Player Type selection on the left.

The config caused the iPod to appear frozen (frozen screen) after bootup. The iPod would boot, show the normal boot screen and then created a boot screen mixed with theme settings. Picture: http://imgur.com/E4srA the iPod refuse and refused to mount.

Fix:
1: Boot into recovery diskmode
2: Remove conflicting config.cfg
3: Reboot into normal mode

So far there's still two problem which have never been fixed on Android:
1.When opening Rockbox, its volume bump to max automatically whatever it was when last quit;
2.On most HTC(and probably other) devices one can't use physical volume keys to adjust. Volume bars in WPS and SBS work well however.

Hopes the fixes!

Reported Version: 3.15 not 3.14

Hello,

I am using a "SanDisk Sansa Clip+" and it seems that currently it is not possible to remove quickscreen entries when they are set, you can only overwrite them.

In the manual chapter "3.15 Quick Screen" has to be adapted, once this function has been implemented.

It would be very nice to have this possibility!

-Ramon

I would like to run my iPod with its keypad locked all the time, thus I wrote a little patch to an option to disable the settings reset during startup regardless of the hold button's position.

You will find the patch attached to this message. I'm not entirely convinced by the name of the new option (or my wording in general) so if you have a better idea, feel free to rename things.

Rockbox’s file viewer has a global sort setting.

It would be nice to have a default global sort setting, but also persistent per-directory sort settings.

For my use-case, it makes sense for me to sort my podcast directory by date, but I wouldn’t want that to affect my music directories, which should play files sorted by name.
Whenever I wish to play music, I need to go back to the general settings, and change the sort settings. And when I’m done and wish to listen to podcasts, I have to change it again.

Before you get carried away, this is the script that will build talk clips in /.rockbox/talkclips/* for all tags and labels (reading tagnavi.config as well as the database_[0-9]*.tcd files).

The idea is that the database code will then look here for talk clips.

In the long term, the same method could be used for the file browser if desired.

Hopefully someone will help me out with the database code side of things, as I don’t think I’m up to that challenge.

This is the first step of being able to use the pictureflow plugin from a database search. The database now indexes the path to the coverimage for each audio file. In the database browser you can select “Cover by...” genre, artist, composer, year or all and will be presented with a list of cover image paths. (Imagine a call to the pictureflow plugin at this stage, so instead of a list of boring paths you get nice and shiny images). After selecting a path it will display the list of files that would be queued when a cover image is picked in the plugin.

Next step is to work out how to safely call the plugin without losing the context and utilise the return value from it to queue the files.

Issues so far are:

- the preferred size of 100×100 is hardcoded (this should be configurable or at least be consistent with the value in the pictureflow
the db update for covers has the same restrictions as the other tags, i.e. it will only detect changed cover art on
the coverflow plugin needs to work while music is playing (or stop playback if needs
since there is no guaranteed relation between album name and image file, the album name can’t be displayed

Rockbox hangs if the disk gets full during database creation.

The database hangs when doing initialization if there is no music file on the player.

How to reproduce:
1. Install Rockbox.
2. Put some music files onto the device.
3. Initialize database.
4. Reboot.
5. Remove all music files from the player.
6. Initialize database.

The search condition of tagnavi (eg. =, >, ^,…) doesn't return a correct search result to characters other than the Latin alphabet.

For example;
1) artist ^ "A"

    Neither "Ándre" nor "ándre" appear to the search result. 

2) artist = "Ándre"

    Neither "Andre" nor "andre" appear to the search result. 

My patch file solves such a problem.

Because it doesn't test enough.
There is still a possibility that the search result is not correct
according to the character used.
Please report.

About performance

The search time is slow than before. 
I will improve this in the future. 

About patch
　　Please execute make zip (or make fullzip) after applying
the patch to the source file.

　　There is uni.mt(or unimini.mt) in .rockbox/codepages folder
when rockbox.zip is unziped, and copy this file onto your player's
.rockbox/coepages.
(The search result doesn't correct if there is no uni.mt(or unimini.mt)).

About search result
1) It is considered that the character that is the difference
　　　of the uppercase, titlecase and the lowercase is the same.

   eg. A = a, Ω = ω

2) It is considered that the character with the pronunciation sign
(accent, umlaut, etc.) is the same as the character to which these are not attached.

   eg. A = Á

3) The combination character is considered to be a character that divides into each character.
　　eg. Œ　= O E

4) Only Japanese: the Hiragana, the halfwidth Katakana are considered to be the same character as the fullwidth Katakana.

eg. あ = ア, ｱ = ア

By default, whenever you choose the <All Tracks> option from the database menu, the list of results returned defaults to the standard track name format, i.e. “%02d. %s” tracknum title. What I wanted was to be able to define the format that gets applied to the <All Tracks> option, dependent on the current menu level. So for example, if I had browsed to genre→artist→<All Tracks> it would return the list of all tracks for all artists for the given genre and I wanted the track names to be formated with:

       	"%s %s %02d. %s" artist album tracknum title

and then sorted into order, since I already know what genre the tracks are for.

Similarly, if I simply browsed to genre→artist→album→<All Tracks>, it would return the list of all tracks for the selected genre and artist, but I want the track names to be formated with:

"%s %02d. %s" album tracknum title

so when it’s sorted, I get the tracks grouped only by album and tracknumber, since I already know what artist the tracks are for.

This patch attempts to address this issue by allowing users to define custom <All Tracks> formats in the tagnavi_custom.config file. Thus, sort order can be controlled by how you format the track names, just as it works in base Rockbox.

The premise behind the code is that if the <All Tracks> menu option is chosen, Rockbox will look for formats with a certain naming convention defined by concatenating the tag names of the parent menu levels with “.” characters and finally appending an “.All” identifier. So in the first example above where we had browsed to genre→artist→<All Tracks>, Rockbox will look for all formats called:

"genre.artist.All"

and then cycle through them to see if the appropriate clauses defined on the format are met. Similarly, for the second example where we had browsed to genre→artist→album→<All Tracks>, Rockbox will look for the format called:

"genre.artist.album.All"

As in base Rockbox, it will cycle through all applicable formats and apply the first format it comes across that meets all the clauses defined on the format. One minor change I had to make to get the relevant tags loaded for the search results was to add the tags defined in the clauses of all matching format names to the tagcache search, but not add the clauses themselves.

So now, in the tagnavi_custom.config file to illustrate the first example, I have defined 4 formats called “genre.artist.All” to format the final display name based on whether the artist/album tags are actually defined on the mp3’s in the database.

%format “genre.artist.All” “%s - %s - %02d. %s” artist album tracknum title ? artist !~ “<Untagged>” album !~ “<Untagged>” tracknum > “0” %format “genre.artist.All” “%s - %02d. %s” album tracknum title ? album !~ “<Untagged>” tracknum > “0” %format “genre.artist.All” “%s - %02d. %s” artist tracknum title ? artist !~ “<Untagged>” tracknum > “0” %format “genre.artist.All” “%02d. %s” tracknum title ? tracknum > “0”

The downside of this approach is that in order to have this style of functionality for every <All Tracks> menu option, I defined a lot of formats. As such, I had to increase the maximum number of formats from 32 to 96 in order to cope with my formatting schemes. I also increased the maximum number of tag filters from 4 to 8. Now this obviously increases the amount of memory allocated for formats, which will have an impact on available audio buffer size. The attached tagnavi_custom.config file shows the various “All” formats I’ve added and it’s pretty comprehensive in the way it handles missing tags, so technically, if your music library is properly tagged, you should never need all of the formats so you could easily reduce the maximum number of formats.

My principal concern with this patch is in terms of the memory usage of increasing the maximum number of formats and number of tag filters allowed. I’m not aware of a memory profiler for cygwin, but then I hadn’t used cygwin before playing with Rockbox - so any pointers would be helpful.

The second piece of functionality I wanted was in the handling of the “strip” functionality. Base Rockbox has an all or nothing approach; if the global format found for the list of tracks contains a strip modifier, then it applies the strip to ALL track names, even if the subsequent formatting of the track does not contain a strip modifier. I wanted Rockbox to only strip tracknames if a strip modifier was defined on the format that is applied to the track. This patch fixes this problem.

This works fine on my Sansa e280 with a full 8Gb drive and a full 2Gb micro-SD card. It’s formatted close to 1000 tracks with no noticeable difference in processing time, and I’ve not come across any out of memory errors on my e280, but I haven’t tested it on any other mp3 player so I would recommend you test this first using the appropriate simulator.

Note that this patch incorporates the year album patch  FS#8051  as the code is all tied up in the same files.

Build 20399

The database_changelog.txt is corrupted in that the wrong filename is associated with a track, this has happened before (pre v3.0), I had to write ascript to correct it.

Exampe row from log:

artist=”Teach Yourself” album=”Polish Conversation (Disc 3)” genre=”Books & Spoken” title=”Conversation 1: Booking A Hotel In Krakow” filename=”/iPod_Control/Music/Blur/Blur - Blur/14 Essex Dogs.mp3” composer=”<Untagged>” comment=”<Untagged>” albumartist=”Teach Yourself” grouping=”Conversation 1: Booking A Hotel In Krakow” year=”2006” discnumber=”3” tracknumber=”2” bitrate=”71” length=”640824” playcount=”0” rating=”0” playtime=”0” lastplayed=”0” commitid=”12” mtime=”955689818”

Hello.

I found that bookmarks which was automaticaly created (by the function Bookmark on Stop with set to Ask) from tagcache don’t work. Problem is in missing path to file in bmark file. I made more test and now I attach bmark where first line/bookmark is from tagcache and second line/bookmark is from files browser.
Both are on approximately same time.

I testted on Sansa c250 and Sansa Fuse2 with Rockbox r27481-100718.

Can anybody from developers focused on it, please.

Much more thanks.
Salaba

In my sansa Fuze v2 build 28208 when I insert some album to the playlist and after that I insert another album to the playlist I got this error massege:

Data abort
at 3001AE90
FSR 0x8
(domain 0, fault 8)
address 0xB0166244

thanks!

While the database initialisation is running, the tagcache queue can overflow due to system broadcast messages. This can be seen by running a simulator (it will crash with KERNEL_ASSERT after a while) or on a target by enabling KERNEL_OBJECT_CHECKS, then initialising the database and repeatedly connecting/disconnecting a charger.

The same problem may well happen with other queues (dircache, for example).

The attached proof-of-concept patch highlights (places the cursor at) each album's last-played track in database views. The intention is to allow easy resuming of multi-track audiobooks or podcasts where they were last left off. This works best when autoresume has also been enabled.

The patch relies on runtime statistics gathering being enabled (and the DB needs to be enables as well, of course).

The current patch has some caveats that I plan to address in future revisions:

Right now, it's unconditionally enabled for all database-based track views. We might consider allowing to turn this off for regular music albums.

When the last-played track has been completed (played through to its end), we should actually highlight the next track (or the first track if the last-played track was the final track of the album). [EDIT: fixed – see latest patch in comments section]

It would be great if a similar feature was available for the file browser. I'd find it acceptable if that would require the DB as well (as that's the place where the last-played info is stored). It could benefit from an add-to-DB-as-files-are-played feature (aka FS#12073).

Comments?

[EDIT: Clarified summary. Fixed a rather severe bug in the patch to make it actually work. :) ]
[ EDIT 2: Linked to FS#12073. Addressed one caveat. ]

These experimental patches dynamically add new tracks to the database when they are played. This allows users who (for various reasons [1]) prefer to not fully initialize the database to take advantage of database-based features such as autoresume (remember a resume position for each file), runtime statistics, or track ratings.

The current patch set is only a prototype. It's still somewhat inefficient because it does a full database commit and reload for each new track that is played.

The actual database-extension patch (patch 0002) works by refactoring tagcache_build to create a new interface, tagcache_add_file, that adds a single file to the database. This new function runs in the database thread and takes a dircache_entry pointer, which is provided by way of a Q_UPDATE event. The audio thread generates this event in tagtree_buffer_event when the initial DB lookup fails, and later checks the database again in tagtree_track_finish_event. If the DB commit and reload have succeeded in the meantime, this second lookup will succeed and the runtime information the user is interested in (stats, resume info) can be stored in the DB.

Patch 0001 changes the DB commit's buffer-allocation preference from using the dircache buffer to using the RAM DB's buffer. (This used to be the preference until r10003 reversed it, supposedly because the dircache buffer typically is bigger. I don't know yet how valid this argument is today.) This reversal avoids needlessly flushing and refilling the dircache and makes the Q_UPDATE event-passing mechanism more robust (because in-flight update events contain dircache_entry pointers, which would have to be invalidated when the dircache is flushed – which is not done yet).

Current limitations/caveats:
* Requires dircache and Load-DB-to-RAM enabled (and only works on targets that include these features)
* tagcache_add_file does not respect any database.[un]ignore files in the directory hierarchy above the added new file.
* DB needs to be initialized to begin with. There's no UI function for a basic DB initialization (without scanning and adding all files) yet.
* Not very thoroughly tested (mostly in simulator, with small file sets)

Possible improvements:
* Delay committing DB changes if more track-add events are in the tagcache queue
* Incremental commit: Could be optimized for add-one-track case
* Incremental load_tagcache: Avoid flushing and reloading full database
* Add function to initialize an empty DB

Comments welcome!

Footnote:
[1] Reasons for not using the database, or not keeping it up to date, include: metadata parser instability; prefer not keep tags up to date; prefer file browser over database browser

I've found a problem with the new autoresume feature in 3.8. I use it when listening to podcasts and sometimes find that it resumes from near the end of a new episode - e.g. on a 30 minute podcast it will resume from 28 or 29 minutes - usually about the place where a previous epidsode finished and I skipped past the end credits.

What I think is happening is that there is some code in the database that tries to resurrect the runtime statistics for files that have been deleted and then restored - as the last offset is in this data, it is reusing the last offset from an old episode.

I've put some more logf()s in tagcache.c in build_numeric_indices(). I can see that if the filenames don't match (line 2306) it then tries to match any 2 tags out of the 3: artist, album or title. For the podcasts, the artist and album are always the same (i.e. the producer and which one of their podcasts it is), but the title is different (i.e. "Episode 100", "Episode 101", etc). So if I've listened to Episode 100 and then deleted the file, and then add Episode 102 to the player, it matches the artist and album and so resurrects the wrong data from Episode 100.

I've disabled the resurrection based on tags (just commented it out) and the problem seems to have gone away. A better fix would be to ensure that all 3 tags or matched or to ensure that title is one of the matched tags

I don't know whenever it happens with other versions or not, all I got is Sansa Clipv1 to test with.
My configuration is Initialize once and auto update working.

It seems like the database items got duplicated for unknown reason. I seem to have up to 7 entry's of the same item inside the database. I am not sure what causes it, but that is what I've noticed.
[At first I thought it's a shuffle bug 'till I was going to debug it only to find the database is full of clones]

This patch allows for the display id3 (v2.2-v2.4) tag
of Lyricist/Text writer in the wps, database, track info.

To display in wps, use "%iw" tag.

Example:

# Disable Status Bar
%wd
# Title
%s%al%?it<%it|%fn>
# Artist
%s%al%?ia<%ia|%?d(2)<%d(2)|%(root%)» # Album
%s%al%?id<%id|%?d(1)<%d(1)|%(root%)» %?iy<%(%iy%)|>
# Songwriter
%s%al%?iw<writer %iw|>
# Composer
%s%al%?ic<composer %ic|>
# Comment
%s%al%?iC<%iC|>
# Time PlayNumber
%al[%pc/%pt] %ar%(%pp/%pe%)
#%s%ac%Sx(Next:) %?It<%It|%Fn>

Tested on sansa c200 v1.
Target source code revision is #29961.

The following files were changed:
apps/screens.c
apps/metadata/id3tags.c
apps/metadata/metadata_common.c
apps/lang/japanese.lang
apps/lang/english.lang
apps/gui/skin_engine/wps_debug.c
apps/gui/skin_engine/skin_tokens.c
apps/metadata.c
apps/metadata.h
apps/tagcache.c
apps/tagcache.h
apps/tagnavi.config
apps/tagtree.c
lib/skin_parser/tag_table.c
lib/skin_parser/tag_table.h

Currently, only English and Japanese languages are supported.

I am not good at English.
Please point it out if there are a problem.

Hi there! I'm having a huge problem with the rockbox boot on an iPod classic 5G. I've selected a number of option in the tagcache settings, such as 'load to ram', and after it readed all the files (30GB of music) ask me to reboot, and finally it freezes on the message 'saving tagcache' [1/9], responding only when i press menu+select for reboot. The same for the usb connection. I can't manipulate the files in any way!

Please excuse my limited English. Greetings from Argentina and congratulations for the fantastic project!

Using r30284

Initialization of the database, from scratch, on the Fuze v2, using a fresh SVN build, fails when committing.

It scans all files, gets to committing 4/9, then hangs at “building database, N files found”.

If I reboot, it tries to commit on reboot, stops at 4/9, then boots into rockbox with no database (ie it asks me to initialize if I try to view it).

Attached are my database* files.

This is a bug in post-3.9 code, as I don’t have the problem with a 3.9 release.

This patch does all the UI work needed to add a very nice folder chooser. It saves and loads the search directories from /.rockbox/database.txt.

This is only the UI change, someone else needs to figure out how to make it actually work.

The system changes to searching the entire tree below folders (so no more ignoring some folders and then looking for uningored folders.

this also uses a half done patch to make lists handle indenting, not done for the skin list but if this is actually wanted that can be easily added

Tested on r31173:

Deleted tracks are still visible after the automatic database update when the player boots. These tracks vanish as soon as I add some files. It also doesn't seem to matter if the dircache is enabled or not. Manually updating the database from the menu works as intended.

The setting works similar to the autoresume dirs: Directories are seperated
by colon, e.g. "/Music:/Podcasts". Default is "/sdcard" on android, "/" on
all other targets.

A maximum of 8 dirs can be selected, the setting cannot be longer than 80 chars.

Note: There's one problem. If you specifiy "/Music:/" (or any folder and one if its parents afterwards), then /Music is scanned twice. It's tricky to fix, and I'm not sure if it's worth it. This does not happen for "/:/Music" as it can be detected more easily in this order (and this is already implemented).

Hi, firstly i put Sansa c200 because SansaClip+ is not available in the list.
My player is a Sandisk SansaClip+ bought 6 months ago with an 8Gb class 4 Sandisk microsd (that is currently empty, no songs stored).

Steps to reproduce the issue (after a fresh installation of the Firmware, no settings changed):

1) Switch on
2) → database
3) → track
4) select any track
5) press the central button
6) Erase Dynamic Playlist? is displayed.. Select Yes
7) countdown then starts to play
8) Seek to the next song (it happens at the first seek or might need three, four one after the other)

Data abort
at 30813E44
FSR 0x8
(domani 0, fault 8)
address 0x62E90028

- I installed version 3.10 on top of version 3.09, but later on I tried to uninstall completely 3.10 and reinstall it from scratch and the issue is the same.

- After the crash i have to keep the "switchoff" button pressed for a while.. then I press it again to restart the player and I try to resume the song I get "playlist control file is invalid" or "nothing to resume"

- behavior is the same with or without the SD card

- The issue was randomly happening (but very very rarely) also on the previous version of the firmware (3.09) I got the error a couple of times in 6 months.

Experienced Results:
I have 2 folders(lets call them FolderA and FolderB) each containing audio files.
FolderA and FolderB are both on the root of my drive
Neither one has a database.ignore file in it.
I go to settings → general settings → database → update now
All files are added to the database as expected
…But i realize i dont want FolderB to show up in the database.
I add a database.ignore file at /FolderB/database.ignore
Then I go back in and update the database again(settings → general settings → database → update now)
all of my audio files still show up in the database(including the ones in FolderB with the database.ignore file)

Expected Results:
After adding the database.ignore file to FolderB and updating the database(settings → general settings → database → update now) the audio files in FolderB should no longer appear in the database

Summery:
Any files in a folder containing a database.ignore file should be removed from the database on update

Rockbox Info:
Build Version: daily / e3cddc2-120701

It seems that operators are discarded when used in a tagnavi.config (or tagnavi_custom.config) format line condition.

For example,

%format “fmt_abtitle” “*%s - %02d:%02d” title Lm Ls ? playcount > “0” & lastoffset == “0” %format “fmt_abtitle” “%s - %02d:%02d” title Lm Ls Now if we used “fmt_abtitle” instead of “fmt_title” in the default tagnavi file, we would expect all tracks with a playcount greater than 0 and lastoffset equal to zero to be prefixed by three asterixes (*). Instead ALL the tracks with a playcount greater than zero are prefixed, leading me to think that the & lastoffset == “0” part is discarded. If I make the following change:

%format “fmt_abtitle” “***%s - %02d:%02d” title Lm Ls ? lastoffset == “0” & playcount > “0” %format “fmt_abtitle” “%s - %02d:%02d” title Lm Ls

Now all tracks with a lastoffset equal to zero are prefixed, which again proves that the and operator was clearly ignored and unparsed.

I am having a couple of problems with Rockbox on my iRiver H140.
The first issue is that all my songs in the files folder are displaying only in the order
that they were uploaded onto the machine. If I go into the settings and choose to display
Artists in alphabetical order it doesn't have any effect! I am left to endlessly scroll through
the names or listen through the iriver player which doesn't play WAVs or FLACs so i can't access everything.
Secondly, if I start up and resume playback of an album it doesn't then allow me to access the files folder when I navigate to it. I have to then restart my player and go to files from there. If I later come out to the main menu and choose Files, or any folder for that matter, it won't open. It's really frustrating. Any ideas of a fix?

I cat choose folders to be scan into database. When I select some folder I don’t get confirmation if I want scan database, when I back to screen with folders none of selected folders are selected. I try to set them in config file manually and reread file into rockbox after start but it didn’t help either.

If I can collect some logs or screenshot pleas tell me how I will do it.

I was recently renaming some of the music files on my Sansa Clip+ MP3 player using my computer. Some of the renames were as simple as changing the case of some of the letters in the filename, from uppercase to lowercase. After I disconnected my device, I noticed that there were duplicates of certain entries in the database. Upon further investigation, I realized that all of the entries that were duplicated were the files that the names of which I had renamed by changing the case of the letters. After I discovered this, I tried to rename a file in this manner using the device. When I tried to save the file with the new name, the screen showed a box that read “Rename Failed.”
Apparently, at least for Sansa Clip+, RockBox has a problem with renaming files by changing the case of the letters. Let me know if any other RockBox devices have this problem as well.

Version 9e186e34ab-190820

i have an ipod 7th gen
rockbox installed
140.000 titles

database contains in unpredictable many cases of the folders 2 times the same title
not in all folders, but it happens very often that i open one and i see all titles 2x although they are only 1x on the sd card

the files exist only ONCE
but the database keeps listing them all 2 times

i rebuilt it several times, but the database keeps on doing that

any hint what i can do?

start as apple / itunes and delete rockbox folder / install new did not help