Rockbox

r30804
The rockbox (r30804) Can't play ape files with CUEsheet (APE + CUE files).

Hi all!
After 3.10 update I usually get my player frozen with usb plug icon if I connect it to any USB host while the player is off.
Steps to reproduce the issue:
1. Power off the iPod.
2. Plug it to Usb host. (tested with mac and Android)
3. Wait the system to boot.
4. It freezes with usb connect icon (no menu bar). Only holding Menu+Select help.

Thanks. Great firmware!

The Sazanami-Mincho-Regular-*.fnt includes 7128 characters.
However, there are about 7500 character not included in the Sazanami-Mincho-Regular-*.fnt though it is included in the sazanami-mincho.ttf font (This font is a font that became an origin when the Sazanami-Mincho-Regular-*.bdf font is made).

Please look at “List.txt” file about the character not included in the Sazanami-Mincho-Regular-*.fnt.

The cause of this problem is in “fontForge”(http://fontforge.sourceforge.net)
used when the bdf file is made from the ttf file.

When the bdf file was made by using　”Otf2bdf”(http://www.math.nmsu.edu/~mleisher/Software/otf2bdf/) instead of “fontForge”, all characters included in the ttf file were able to be taken out.

However, when you make the Sazanami-Mincho-Regular-*.fnt by using Sazanami-mincho-Regular-*.bdf that applies the patch,
The interval between the line and the line opens from present Sazanami-Mincho-Regular-*.fnt a little.

Please report by using new Sazanami-Mincho-Regular-*.fnt(in new-Sazanami-Mincho-Regular-fonts.zip).

The uisimulator cannot be build by using the source of the latest version on MinGW.

I send this bug’s patch.

It is necessary to apply the patch of FS#10021 to build the firmware on MinGW.

Back button does not work, and sometimes the same function as the forward button.
Rewind button does not work
Of course, I am talking about are the physical buttons，Touch buttons are working properly。

When playing music sometimes crackling sound especially when playing bass

Previous song and Fast Backward are unable to work

Click on the music file and die

Using the latest revision (r20001 - but its been broken since I started using Rockbox) the iAudio M3 does not recharge the battery using either the USB or the Power adapter.

The only way I can get the iAudio M3 to charge is to use Cowon’s firmware.

at least r30058
On the Sansa E280 v1 with a playback speed of 200% the playback restarts at bookmark plus about 2 seconds.

The key lock feature on my clip+ can be circumvented. Select the last title in a directory using the file browser. Then activate the software hold. When the song finishes the Player skips to the file browser and the key lock is turned off after a button press. You can navigate around the menus until you return to the playing screen, then the key lock turns on again.

SVN r30720

svn-r31216

when deleting a directory with several files in it the splash screen, that is appearing when deleting the individual files, gets printed over the last one without clearing the screen prior to it.

When listing to a mp3 for some time there starts a massive random noise in the background. It will continue for some time when pausing or stopping playback and will also continue when starting another track.
I’ve noticed this when listening to a random list of mp3s of various sources and using speedup with 225% or 250%.

At the moment I’m using ee758c5 with my clip+.

Hi!

I’ve found very important bug in Rockbox 3.7, witch my be dangerous for both the player and the memory card (if present).
It turned out that Rockbox doesn’t react to very low battery level while voice or FM radio is recorded. It causes damage to the recorded file when finally hardware falls due to lack of energy. This corrupted file is absolutely unreadable.

The database hangs when doing initialization if there is no music file on the player.

How to reproduce:
1. Install Rockbox.
2. Put some music files onto the device.
3. Initialize database.
4. Reboot.
5. Remove all music files from the player.
6. Initialize database.

Playback halts.
No error screen appears – screen seems to stay where it is when freeze occurs, i.e. WPS or back light off.

Tested multiple audio formats.

Does not occur if no head phones are plugged in.

If you play a song for a bit at low volume (tested -14dB) before raising the volume, it is okay.

To reproduce:
Find a loud, bass-heavy part of a song, and halt playback right there.
Set volume to 6dB.
Set bass to 14.
Resume playback.

Usually freezes in less than a second when I do that.

RB version:
33f3af2-130523

Sans Clip V2

24bit 96000 Hz 6 Channel (5.1) FLAC files skip to next song after 30 seconds. 30 seconds is an estimate because my screen is broken, so I can’t see what’s happening. I downloaded a daily build 3 days ago, but I think it’s a buffering issue. Flac is 8181 kbps (says Foobar).

It’s the first time I tried these files, so I don’t know if they ever worked, or ever will.
If they never will work, I’m sorry for reporting this.

Thank you all for your time and efforts.

I was recently renaming some of the music files on my Sansa Clip+ MP3 player using my computer. Some of the renames were as simple as changing the case of some of the letters in the filename, from uppercase to lowercase. After I disconnected my device, I noticed that there were duplicates of certain entries in the database. Upon further investigation, I realized that all of the entries that were duplicated were the files that the names of which I had renamed by changing the case of the letters. After I discovered this, I tried to rename a file in this manner using the device. When I tried to save the file with the new name, the screen showed a box that read “Rename Failed.”
Apparently, at least for Sansa Clip+, RockBox has a problem with renaming files by changing the case of the letters. Let me know if any other RockBox devices have this problem as well.

When playing a sequence of two songs Rockbox on my HTC Desire S always crashes. I first had r30576-110921, and now it is r31516-120102. Cropped versions of the songs can be downloaded here:

http://www.vlado-do.de/rockbox/01_Wenn_die_Nacht_am_tiefsten_03m_08s_09h__03m_23s_22h.ogg http://www.vlado-do.de/rockbox/02_Wir_m%C3%BCssen_hier_raus_00m_00s__00m_28s_82h.ogg

They still reproducably crash my Rockbox. I found a workaround, though: mp3 versions of the same songs play all right. Rockbox for me still is the only known way to have gapless playback on my phone. Thanks for that guys!

Buy the way: the same ogg files made no problem in Rockbox on my old iPod nano.

I have sansa clip+. Lrcplayer opens and plays USLT tag instead of SYLT tag if there are both in mp3 file and no external lyrics(.lrc, .lrc8, .snc, .txt) so lyrics which play are not synchronized. Please make SYLT tag opens and plays defaultly instead of USLT tag.

There is bug in rockblox: when you manage to push block exactly to the top of the field, game neither finishes with error, neither continues normally. this block starts growing when you destroy lines in the bottom.

I've made small video and put in into youtube (sorry for bad quality and sharpness :
http://www.youtube.com/watch?v=2gULp6yUms8

look into the left top and see what happens when lines are removed. bug is quite easy to reproduce. right side works like the left.

The Clip Zip's text viewer does not bookmark anymore. When holding down the Submenu and Select keys (which according to the manual sets a bookmark), no bookmark is created, and the screen flashes between the context menu and the text file instead. This bug has been confirmed by skip252 here: [ http://anythingbutipod.com/forum/showthread.php?p=629493&posted=1#post629493 ].

Rockbox build is the latest dev build at the time of filing [62de15f-130103].

When plugging in an AC USB charger, the ipod shows rockbox's disk mode instead of just changing the "external power" icon. Is it possible to make it detect if a charger is connected, or an usb host (for example, a computer)?

Doing the same test (with the same charger) on an ipod color/4g shows the expected result (not going to usb mode, just a charger icon appears)

ROLO is broken on Nano 2G 3.10RC. It just says: Executng… and freezes. Seems to be happening not only for me:

http://www.rockbox.org/mail/archive//rockbox-archive-2011-11/0070.shtml http://www.rockbox.org/irc/log-20111105#23:01:01 (is this also related?) http://forums.rockbox.org/index.php?topic=28467.0

While I am playing some song on my iPod classic 2G, and scrolling through a list (even the main menu, but the glitch there is somehow different), if I unplug and then replug the headphones, some of the WPS UI gets drawn over the current view. I'm attaching a screenshot to make it more clear. It only happens while playing a song.
I'm using build bf6abf7 (most recent at the moment).
Also attaching my config.

Metronome plugin is not functional on Ipod 6G.

Steps to reproduce:
1) Open metronome;
2) Hold the "Select" button.

Expected:
– The metronome starts to tick in the headphones.

Observed:
– The text on the screen changes from "start: hold select" to "stop : cancel", but no sound is made.
– A short click on the Select button emits a single tick sound, but the tapped frequency cannot be captured as the Ipod 6G does not have any "Record" button.

Comment:
As single taps can be made, the metronome.c / play_tock() seems to work
and at least some sort of sound can be produced on this hardware,
maybe something is wrong with the timer_callback() ?

When you configure Shortcuts to replace the Quick Screen then there is this unwanted behaviour:
Exiting the Shortcuts menu always returns to the Main Menu, not to the screen from which the Shortcuts menu was invoked by pressing the Quick Screen key combination.

Tested on: Sansa Clip+
Builds tested: latest daily - b7bc240-120409

			latest current -	2406005-120410

If you add a tank or a plane on a field the strenght does not increase at any time ( as expected ). E.g. place a tank on a field with a farm.

The Bug is located in superdom.c in lines 438 - 457

static int calc_strength(int colour, int x, int y) {

  int a, b, score=0;
  for (a = -1; a < 2; a++) {
      for (b = -1; b < 2; b++) {
          if ((b == 0 || a == 0) &&
              (board[x + a][y + b].colour == colour)) {
              score += 10;
              if(board[x + a][y + b].tank || board[x + a][y + b].farm) // <-- this is the BUG
                  score += 30;
              if(board[x + a][y + b].plane || board[x + a][y + b].ind) // <-- this is the BUG
                  score += 40;
              if(board[x + a][y + b].nuke)
                  score += 20;
              if(board[x + a][y + b].men)
                  score += (board[x + a][y + b].men*133/1000);
          }
      }
  }
  return score;

}

The Bug should be fixed by using this lines instead :

static int calc_strength(int colour, int x, int y) {

  int a, b, score=0;
  for (a = -1; a < 2; a++) {
      for (b = -1; b < 2; b++) {
          if ((b == 0 || a == 0) &&
              (board[x + a][y + b].colour == colour)) {
              score += 10;
              if(board[x + a][y + b].tank)
                  score += 30;
              if(board[x + a][y + b].farm)
                  score += 30;
              if(board[x + a][y + b].plane)
                  score += 40;
              if(board[x + a][y + b].ind)
                  score += 40;
              if(board[x + a][y + b].nuke)
                  score += 20;
              if(board[x + a][y + b].men)
                  score += (board[x + a][y + b].men*133/1000);
          }
      }
  }
  return score;

}

While in the fm radio screen, a ticking noise can be heard in the background. When pressing the power button in the radio screen the noise disappears.

Tested at r29689, gcc 3.4.4. When trying to create a voice file in Cygwin, the following comes out (taken from STDERR):
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x453): undefined reference to `_speex_nb_mode'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x45a): undefined reference to `_speex_wb_mode'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x462): undefined reference to `_speex_encoder_init'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x490): undefined reference to `_speex_bits_init'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x4b9): undefined reference to `_speex_encoder_ctl'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x4d9): undefined reference to `_speex_encoder_ctl'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x4f6): undefined reference to `_speex_encoder_ctl'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x513): undefined reference to `_speex_encoder_ctl'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x527): undefined reference to `_speex_encoder_ctl'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x5fd): undefined reference to `_speex_resampler_init'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x609): undefined reference to `_speex_resampler_skip_zeros'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x6ac): undefined reference to `_speex_resampler_process_int'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x6fc): undefined reference to `_speex_encode_int'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x724): undefined reference to `_speex_bits_write_whole_bytes'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x7c0): undefined reference to `_speex_bits_write'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x81d): undefined reference to `_speex_encoder_destroy'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x829): undefined reference to `_speex_bits_destroy'
librbspeex.a(rbspeex.o):rbspeex.c:(.text+0x83d): undefined reference to `_speex_resampler_destroy'
collect2: ld returned 1 exit status
make[2]: * [../rbspeexenc] Error 1
make[1]: * [rbspeexenc] Error 2
make: *** [voicetools] Virhe 2

I’m using revision 29572 of android port. Host system is Samsung Galaxy 3 i5800, with 240×400 resolution display, with version 2.2 (Froyo) of Android.

The problem is as follows. When trying to start playback of OGG or SPX files, the playback does not start occasionally (the change is maybe less than 20% to have playback). By rewinding randomly it is possible to get it start playback. The same behaviour occurs when starting from bookmarks and from file explorer. The problem occurs with default config file.

Tried with MP3 and had the same problem. The problem may be with other codecs as well but I have not tried it so extensively.

Best

I have RockBox version 3.9 on my Sansa Fuze v2 and so far I love it, but I have one problem. On a few tracks in my library, when I play them, the first few minutes of the song will be strangely distorted. Most of them are songs where the music starts off in just one of the speakers before moving into the other one. There will be bursts of loud, crackly noise in the other speaker during these first few seconds (that seem to be in time with the music) and then it will fix itself and the rest of the song will play perfectly. When I boot the default Sandisk firmware the songs play perfect like they should, it is only in RockBox that this glitch happens. I’ve messed with the settings a bit and even reset them completely, but nothing has worked thus far.

Attached is one of the songs that this happens with, from about 2 seconds in to about 7 seconds in. Any help would be greatly appreciated. I really want to enjoy my music without that crap in it.

I would like to leave my player charging overnight and have it resume playback in the morning to wake me.

My player remains on when charging and cannot be turned off.

The alarm does not resume playing if the player is already on when the alarm time passes.

I suspect this probably applies to all players, mine is a Sandisk Sansa Clip+.

Rockbox info says v. 3.13 - the stable build grabbed by RockboxUtility, which this bugtracker doesn’t seem to know about yet.

Daily build c6d5cd7-170907

An idle power off can occur in recording mode. When it does, data loss occurs. This has already bitten me a few times.

Steps to reproduce (on battery, not charging):
1. Execute Settings > Manage Settings > Reset Settings
2. Set Settings > General Settings > Startup/Shutdown > Idle Poweroff to 1 minute
3. Reboot
4. Go to Recording mode
5. Note current Volume and Gain settings and then change them to something else and note the new settings. Don't start a recording; just leave it in “stop” mode (*not* record or record-pause).
6. Wait for automatic power off
7. Power back on and check recorder settings

Expected: Settings are what they were after being changed.
Actual: Settings reverted to what they were on boot.

This can cause the loss of entire recordings, too:

8. Go back to Recording mode.
9. Wait until just before Rockbox would power off, then start a recording (if the display goes to sleep, it comes back on a bit before powering off; start the recording as soon as it comes back on).

Expected: Recording is done as usual
Actual: Rockbox powers off anyway, without warning, less than a minute into the recording. The recording is lost (or if the file is there, it's unplayable; maybe this depends on the recording format used).

After upgrading from "Version: 33856d9-161111" to "Version: 6436c6e-170211" Resume Playback from the main menu does not work. Here are the steps taken to verify the problem:

Running Version: 6436c6e-170211… Reset config
Using default settings, enabled Shuffle via Shortcuts
Started playlist; track identified as 1 of 5330
Skipped ahead to the 5th track
Paused @ 1:01
Forced shutdown
Enabled Hold switch
Waited ~1 min., then booted via disengaging Hold switch
Clicked Resume Playback… resumed on the same first track (1 of 5330)
This behavior occurred every time I attempted to Resume Playback.

Restored previous version (Version: 33856d9-161111)
Rebooted
Reset Settings
Using default settings, enabled Shuffle via Shortcuts
Started playlist; track identified as 1 of 5330
Skipped ahead to the 5th track
Paused @ 1:01
Forced shutdown
Enabled Hold switch
Waited ~1 min., then booted via disengaging Hold switch
Clicked Resume Playback… resumed on the fifth track @ 1:01

FWIW: No Bookmarking used (never have). Database not initialized (never use it).

m4a Songs skip in middle of playback, to next song.
always at same point. fast forwarding beyond this point is fine.
files work fine on other devices/PC.
reverted back to v3.6 and all such problems are gone

When connected to PC.
While transferring files from PC to Sansa e280v2.
Both source and destination folders are open.
Sansa shuts off after some time. while transfer is still happening.
this does not happen with original firmware.

Duplicate table and some text found in manual/main_menu/main.tex in section Recent Bookmarks, and in manual/configure_rockbox/bookbarking.tex in section Bookmarking.

These duplicate code sections should be joined, and the two files should share it.

Tested on r24190-100105

To reproduce:
- Start Rockbox, default setting
- Play a file with ID3 tags which are encoded in some non-Latin locale (In my case, Hebrew). Notice that the strings are shown in Gibberish.
- Change Default Codepage to the other locale (e.g. Hebrew).
- Go back to WPS

Expected result: All strings that are encoded in the other locale are shown properly.
Current result: All these strings are shown in the original locale.

Workaround: Restart the player. The new locale is applied.

I will not have time to fix this myself, so I'll appreciate if someone else can take responsibility for this bug. Thanks.

When loading a saved Brickmania game, the game is loaded corrupted. Please see screenshot attached to see for yourself. There is one brick in the right side which is shown corrupted, and one corrupted rectangle in the left side of the screen which drops like a power object, and stays at the bottom of the screen.

This issue happens on Cowon D2 target. It doesn't happen on the D2's simulator.

Looking at the code and comparing the loading/saving function against the Bubble's game functions, I can see that the return value of file operations is not checked (I'll fix that).
In Bubbles, there's a single file operation of reading/writing the game context struct. In Brickmania there are several consequent file operation to read/write each variable. Maybe the drivers doesn't handle this well on this target. A workaround for that could possibly be to join all saved variables under one game context struct as in Bubbles, but that could mask a real bug somewhere else.

On page 51, which is in Section 6.8, there is a table for keys/actions. The Key column is completely empty, though.

On page 77, in Section 11.1.1, the blackjack game plugin, there table is similarly broken. Same for BrickMania in Section 11.1.2. Chessbox, in section 11.1.4 has a similar problem with only the "direction keys" being in the table.
There are many more games with this problem.

This is for a manual I downloaded 2010-10-11.

Thank you for your attention.

I have only tested this on my H120 with an 18007 build. I have been using the APE codec for some time now and never had a problem in the past.

After reformatting my hard drive and installing the current build I found that rockbox has 2 problems with my APE files

1. The parser for APE files no longer recognizes my APE files encoded with version 8,9 of Jriver Media Center. Result is that files don't play when selected in the file browser and these files do net get added to the database.

2. When switching APE tracks one of two possible behavior occur. a) the Iriver freezes completely. b) On switching tracks there is a loud hiss and then playback of the next track resumes.

Cheers

  Thomas

All settings should be listed there (even more so settings which cannot be set through the UI), but root menu order is only described in advanced_topic/main.tex as of now.

The %pb tag has a small problem. If an image is specified but no height, the tag draws the size of a line even if larger than the the image. This leads to pixel garbage below the progressbar.

The test.wps reproduces the problem in the 320x480 sdl app The default font, 27-adobe, has to be selected probably. The wps works if a height, i.e. 20 in this case as the image height, is specified

Test.png shows the problem. test.zip is the small test theme.

The 2bit greyscale LCD drivers ignore the current viewport’s drawmode. This makes you unable to draw icons with a non-clear background.

I'm using Rockbox 3.10 with the 01.02.16 Clip+ Firmware on a Sansa Clip+ 8GB, installed via the installer.

There are a lot of 44kHz/16bit FLAC files stored on the device. During playback it could happen that the next track starts while the current one isn't even close to finished. This can be in the first few seconds or in the middle of the song.

This usually doesn't happen to the same song twice. It's generally a different song each time. When skipping back to the track that was skipped, it usually plays without any problems.

The memory has been checked with CHKDSK and no errors were found. The FLACs play fine in foobar2000 and I'm certain that they are okay.

I do believe the error occurs most often after roughly quarter to half an hour of playback.

This may be related to FS#12208

Hello,

empty menu items crash rockbox due to NULL pointer access.
Easily reproducable with the "LCD settings" in RaaA / SDL app build.

The resulting valgrind trace looks like this:
==22619== Invalid read of size 4
==22619== at 0x407FDA: do_menu (menu.c:555)
==22619== by 0x41B198: miscscrn (root_menu.c:323)
==22619== by 0x41B377: load_screen (root_menu.c:520)
==22619== by 0x41B72A: root_menu (root_menu.c:688)
==22619== by 0x406DFA: main (main.c:196)
==22619== Address 0x0 is not stack'd, malloc'd or (recently) free'd

Question:
Should we protect against "menu→submenus" being NULL or
should the menu system hide empty menus without any items at all?

Cheers,
Thomas

Hi,

the random_folder_advance_config plugin fails to build the
folders on N900 / RaaA. I guess it suffers from the same
as the database update did in the past: It probably follows
starts over and over again in the /proc or /sys filesystem.

On my newly purchased (but used) Archos Internet Tablet 70 250GB with Android Version 2.2.? (Froyo) I installed the daily build of rasher. Everything works so far, but playback of MP3 (mostly 160 Kbit CBR and ~200 Kbit VBR) pauses briefly every 2 to 3 minutes. I just reformatted the drive, which now has ext3 and that seems to end the pause which I got on FAT32 after ~4 Seconds of every new song, but every 3 minutes or so the playbacks stops for about a second - very annoying. Don't tried other codecs as I don't own any files other than MP3.
I was in the developers menu during one of this pauses, looking at the list of the contributors. The old names fly away to the right, but this was frozen also during this one second timespan - as if the rockbox-process was paused entirely or so.

Device: Sansa Fuze v2 (stable port)
Rockbox Release: 3.12

Recently I have been noticing a problem with themes that allow radio station logos to be displayed on the FMS screen. This is most noticeable with the analog and Fuzemod themes. While the logo displays properly, other images on the screen do not. In the case of the analog theme, the VU meter appears corrupted and with the Fuzemod theme the battery animation, tuning bar slider and playmode indicator icons fail to appear as expected. This problem was not present when either of these themes was used with the releases before version 3.12. In fact this bug appears to have been introduced by one of the experimental daily development builds either in May or June. I have tried different sets of radio station logos and preset lists with these themes but I always get the same result when using version 3.12; everything is fine with any previous release. Since this problem occurs with two different themes along with any combination of radio station logos and preset lists, I can only conclude that it originates with the firmware.

I have attached to this report three generic radio station logos in bitmap format along with a generic preset list. You can put these into /.rockbox/fmpresets and try your own tests. Since the frequencies were selected at random, don’t expect them to tune in anything. Besides, there is nothing wrong with the ability of the Rockbox firmware to tune in radio stations or play their music. The problem starts as soon as the user starts flipping through the station presets, so don’t be shy about changing the station frequently during your tests. I also find that in order to accurately reproduce this problem the Sansa Fuze v2 should be powered off then on again whenever a new theme or preset list is loaded.