Build 21245

I have ''Start Screen' set to 'Resume Playback'.

When connecting the Ipod (from OFF) to the PC the Ipod boots and USB mode starts but also playback (the play > sign is display on the title bar).

The Ipod is not shows and not mounted on the PC.

On disconnecting USB I get 'data abort' and have to hard reset.

as3525
Version: 91b52a1-120122

Running on Sansa clip zip, unable to play the following .ogg file (I can't try it on other Rockbox versions, maybe someone can?). Works fine played any other way.

www.quik.clara.co.uk/Wontplay_inrockbox.ogg

(too large to attach directly)

After upgrading from 3.0 to 3.1, the “Beep” sound (enabled in Settings / Playback Settings / Beep Volume) now sounds very distorted and fuzzy.

It sounds this way on any setting. Strong, Moderate or Weak and with the player’s volume on any setting. It definitely sounded like a normal clean beep with 3.0

This is on an 80gb Ipod 5.5 with Rockbox r19569-081223

I’m not sure if this should be under “Music Playback”, as I don’t seem to hear the distortion and fuzziness when playing mp3’s.

Mike

“First Keypress Enables Backlight Only” doesn’t work on the 5G iPod. For example, if that’s enabled, the backlight is off and I press next track while at the WPS, Rockbox will go to the next track.

It seems like clickwheel event(s) generated when I touch the wheel turn on the backlight. When the button is pressed, the backlight is already considered to be on and the button press performs its usual action. If I carefully hold my finger still on the clickwheel, let the backlight fade, and then carefully press a button without moving my finger on the clickwheel, I am able to turn on the backlight without causing anything else to happen.

I don’t know what to do about this. Requiring a physical button press might be annoying. Removing this option on affected targets might be okay, because it’s easy to turn on the backlight by touching the clickwheel (and that doesn’t seem to cause anything else to happen). Another possibility is to require more or specific wheel events.

I set player type to iPod 5G because that’s all I have, but I expect this problem also exists on other clickwheel iPods. This problem exists on r20079 and r20033.

I have a Sansa e260 player and currently Rockbox 3.11.2 running on it.
I got a shuffled playlist with all of my music in it (added to the playlist using the insert function and reshuffled afterwards). When I want to listen to one or more specific songs, I enqueue them with the queue function (in play mode select song, album etc. from database → context menu → Current playlist → Queue).
This works fine in most cases but when there had already been a queue that ended the song before, the song that I want to enqueue is placed before the currently playing song (which is the first song not any more part of the former queue) instead of after it.
If I use the feature "Queue next" the song, album or whatever is correctly placed after the currently playing song. After having used "Queue next" once, other songs enqueued with the "Queue" command may be also placed correctly at the end of the new queue. I believe to remember some strange behavior though when in that case the song was also incorrectly placed as described above.
I tried mp3 and ogg files and the behavior was the same regardless of which file format was used. It also doesn't matter if the song is played from the player's memory or from micro SD card.
As soon as the second song after the queue is playing, enqueued content is correctly placed after the currently playing song again.
I have experienced this behavior for a long time now and with different Rockbox builds on my player.

To reproduce the behavior:
1. Have a reshuffled playlist (created using "Insert" command, then selecting "Playlist" → "Reshuffle" from the wps context menu) with some songs in it
2. Listen to one of these songs which is not the first or last one in the playlist
3. Enqueue a song from your database via the context menu (This song should be placed directly after the currently playing one)
4. Play the enqueued song (or a part of it)
5. Play the next song in playlist
6. Now enqueue another song (This song should now be placed directly before the currently playing song in the playlist)

I have hardly any programming experience at all but it seems to me that somehow there exists some sort of marker that indicates the end of a queue and that this marker is not erased immediately after a queue ends but "one song too late"?

All settings should be listed there (even more so settings which cannot be set through the UI), but root menu order is only described in advanced_topic/main.tex as of now.

2. Installation
Installing Rockbox is generally a quick and easy procedure. However before beginning
there are a few important things to know.
2.1. Before Starting
Supported hardware versions. The Clip v2 is available in multiple versions…

this should read :”The Clip is available in multiple versions…”

Hi, thanks a lot for all of your coding efforts, support, etc. I noticed that the WPS layout changed slightly after installing the latest dev build.

===

Problem: An unexpected indent appears in the WPS after installing the latest dev build on a Sansa Clip+. Please see attachment for an example.

Steps to Reproduce:
1. Install 3.13 with Blind theme
2. Play some tracks to see WPS
3. Upgrade to latest dev build
4. Play some tracks to see WPS
5. Problem occurs here: there’s an extra indentation after the “{current track number} / {number of tracks in playlist}” text, at the bottom-left of the screen.

Player: Sansa Clip+
Rockbox version: 1879de7-140525
Binary: rockbox.sansa
Size: 582384

Additional: Possibly related to #12953

Alarm wakeup doesn’t work reliably. It is unclear whether the setup is wrong or the wake up is. It might be that the player wakes up before time because of a small press on the power button and thus somehow forgets about alarm.

According to the manual, to exit the EQ settings page you press the back button on the fuze+. This doesn’t work. I tried all key combos and none work.

I’m using the latest Dev build for the Fuze+. SanDisk Sansa Fuze+ 5ef1e2d. Same issues experienced in v3.12 stable.

The screen, for lack of a better term, jumps when navigating in upside-down mode.

http://youtu.be/dRfiBtMx2to

(Confirmed this in 4c6c8cd-130926, discovered in build from several weeks earlier)

If ‘Voice Menus’ are enabled, entering the Recording menu will freeze the player…usually before the entire screen is redrawn. Although I can still hear the sound the mic is picking up, the player is locked up, and removing the battery or super-long-pressing of Power is required.

During my testing, I was able to randomly get it to -not- lock up, but it was like a 1 in 50 occurance…tried all formats/sample rates/etc. When ‘Voice Menus’ is -disabled-, all formats/rates/etc work fine.

Thinking it was a problem with my config that I’ve been using for years, I tried with a clean config.cfg (well, deleted and let it regenerate), and narrowed the cause down to the spoken ‘Voice Menus’ being enabled.

Hi!

I’ve found very important bug in Rockbox 3.7, witch my be dangerous for both the player and the memory card (if present).
It turned out that Rockbox doesn’t react to very low battery level while voice or FM radio is recorded. It causes damage to the recorded file when finally hardware falls due to lack of energy. This corrupted file is absolutely unreadable.

Hi there,

  this is another WIP plugin that I wrote last year.  It plays videogame streamed music
  using the UADE library.  Original homepage here: sourceforge.net/projects/vgmstream/

  I'm a bit new to git so please forgive me for not uploading a proper patch.

  To test the plugin, simply copy the rockstream folder to the plugins folder in
  rockbox sources.  And you have to extract the data.zip file in the .rockbox folder.

  The formats.db found in data.zip is basically a list with all vgmstream supported
  extensions (at least "all" by the time I wrote the plugin).  You can add  or remove 
  new or unwanted extensions there.  The plugin will only handle the extensions found
  in the formats.db.

  Currently the plugin works as a viewer plugin, and there is only one extension associated
  with the plugin in viewers.config for testing purposes, but you can always use the 
  'open with' option from rockbox.  Once you open a file the plugin will parse all supported
  files found in the same folder.

  The vgmstream project is updated quite often, if someone wants to
  update the core library, I believe that would be very easy, since I only changed a couple
  of things to it.

  I'm not going to work on this anymore, so I decided to upload it here, and hope someone
  can make a proper patch and maybe some dev would be interested in testing it, make 
  the necessary changes and upload an stable release.

  As a last comment, I have only tested the plugin in the simulator, samsungypr0, fuze+
  and ipod nano. It only worked in the simulator and samsungypr0, so hope someone can 
  fix that.

  Please read the README file for some additional info about the plugin.

  Working on:  simulator and samsungypr0
  Commid ID: e1ea08417bca57c607df6686472fa0a86f38b6d1

Rockbox crashes after USB unplug.

The LCD is highly unreliable: sometimes it displays dots and sometimes it stays black.
Example:
http://forums.rockbox.org/index.php?action=dlattach;topic=13462.0;attach=6384;image

When displaying %mp in a theme while playback is stopped, the value 0 (zero) is displayed.

However, to test for “playback stopped”, one has to test:
%?if(%mp, =, 1)
That is, one has to test for (index + 1) in order to return true for any given enumerator index number.

Same problem when testing for an arbitrary number. Example:
%?if(%ss(0, 2, %St(font), number), =, 15)
returns true when the font is set to “14-Nimbus”, and false when the font is set to “15-Adobe-Helvetica”.

When testing a %tag that holds a numerical value though, it works as expected:
%?if(%pv, =, 0)
returns true when volume is set to 0dB.

Fixing this would likely break all existing Rockbox themes. One solution to this, would be to require new / updated themes to include some specific code that “acknowledges” the new behavior.

The %pb tag has a small problem. If an image is specified but no height, the tag draws the size of a line even if larger than the the image. This leads to pixel garbage below the progressbar.

The test.wps reproduces the problem in the 320x480 sdl app The default font, 27-adobe, has to be selected probably. The wps works if a height, i.e. 20 in this case as the image height, is specified

Test.png shows the problem. test.zip is the small test theme.

Using the %pL Tag (in WPS) in order to simply display it or use it in a conditional tag (like in the “analog” theme yields very high values (let call it spikes) - where they should not be, while the bar-type peak meter is working fine.

Within the simulator, everithing is running smooth, as far as I could see.

I tried to have a look at the sources but that’s too much at the moment.

Does somebody have a clue ?

Regards

  Ralf

%px tag does not behave properly with large files. When playback reaches the time 11:55:50, then the %px resets (starting to show 0).
It’s more extensively described here: http://forums.rockbox.org/index.php/topic,42661.0.html

The 2bit greyscale LCD drivers ignore the current viewport’s drawmode. This makes you unable to draw icons with a non-clear background.

After a lot of trial and error I found out the following.

It appears that 3.10 on my Clip V2 writes a bad nvram.bin file. When I try to set another interface language, my Clip freezes. It does not react to input and the clock in the top line doesn’t update anymore. The FM radio kept on playing though. I haven’t tried all available settings in the menu, just the ones I occasionally use. But the problem never occurred anywhere else, just upon selecting another language.

When I delete nvram.bin, I can set a language. Then I switch the Clip off and on again, and the problem comes back.

See attached the nvram.bin which causes a freeze.

PS.: No Sansa Clip in the Player Type selection on the left.

With my 5th generation iPod, if I connect USB while the hard drive is spinning, I often get full speed mode instead of high speed mode. This testing is with 00b8563, but I’ve observed the same problem in the past. Here’s the relevant part of Linux 3.8.0-21-generic dmesg output:

[26644.712035] usb 2-2: new high-speed USB device number 18 using ehci-pci
[26644.904471] usb 2-2: device descriptor read/all, error -71
[26644.965905] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.967780] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.968004] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.971577] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.973440] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.973459] hub 2-0:1.0: hub_port_status failed (err = -32)
[26645.176048] hub 2-0:1.0: unable to enumerate USB device on port 2
[26645.428038] usb 6-2: new full-speed USB device number 8 using uhci_hcd
[26645.979070] usb 6-2: not running at top speed; connect to a high speed hub
[26646.009069] usb 6-2: New USB device found, idVendor=05ac, idProduct=1209
[26646.009076] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26646.009080] usb 6-2: Product: Rockbox media player
[26646.009083] usb 6-2: Manufacturer: Rockbox.org
[26646.009087] usb 6-2: SerialNumber: 100000000000A270014B32BEB
[26646.024242] scsi21 : usb-storage 6-2:1.0
[26647.038109] scsi 21:0:0:0: Direct-Access TOSHIBA MK3008GAL BU11 PQ: 0 ANSI: 4
(I’ve removed the remaining USB storage messages because they don’t seem relevant)

If the hard drive is not spinning, I get high speed mode. However, there is a disconnect and the device is detected twice:

[27356.784126] usb 6-2: USB disconnect, device number 9
[27371.208044] usb 2-2: new high-speed USB device number 24 using ehci-pci
[27371.347053] usb 2-2: New USB device found, idVendor=05ac, idProduct=1209
[27371.347058] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27371.347062] usb 2-2: Product: Rockbox media player
[27371.347065] usb 2-2: Manufacturer: Rockbox.org
[27371.347069] usb 2-2: SerialNumber: 100000000000A270014B32BEB
[27373.079038] scsi25 : usb-storage 2-2:1.0
[27373.337244] usb 2-2: USB disconnect, device number 24
[27373.640029] usb 2-2: new high-speed USB device number 25 using ehci-pci
[27373.779220] usb 2-2: New USB device found, idVendor=05ac, idProduct=1209
[27373.779226] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27373.779229] usb 2-2: Product: Rockbox media player
[27373.779233] usb 2-2: Manufacturer: Rockbox.org
[27373.779236] usb 2-2: SerialNumber: 100000000000A270014B32BEB
[27373.820382] scsi26 : usb-storage 2-2:1.0
[27374.823266] scsi 26:0:0:0: Direct-Access TOSHIBA MK3008GAL BU11 PQ: 0 ANSI: 4
(Again, I’ve removed the remaining USB storage messages because they don’t seem relevant)

I get the same behaviour regarding high speed vs. full speed mode in Windows 7, but I’m not aware of Windows reporting other USB errors anywhere.

I was sometimes having USB difficulties that seemed to be due to contact oxidization or dust from not using the dock connector in a long time, but I don’t think that’s the cause here.

I’m attaching USB traces from WireShark using Linux usbmon. In both cases I removed all the USB mass storage stuff after get max lun because it seems irrelevant and increases file size a lot. When the result is full speed, something goes wrong after the set address response. When the result is high speed, something goes wrong after the set configuration request. In both cases the first sign of trouble is an interrupt from the USB hub.

This is on a Gigabyte GA-P35-DS3R rev V1.0 motherboard with Intel P35 + ICH9R chipset.

I'm having a shutdown issue after using my 6G ipod Classic in the car. After I have turned off the car the ipod will automatically enter a paused state but when i either hold play to shutdown or wait for the idle shutdown it will hang showing the shutting down… text and never turn off. when I manually shutdown the ipod (hold play button) down after using the ipod in the car you can hear the HD spin up and after 4-5 second hear the HD park (click) but still feel the ipod vibrating like the HD is still spinning, the text shutting down… is shown and just stays there and drains the battery. the only way to shut it down it hold menu and select.

In car is a Dension gateway G300 (ipod is connected and controlled with a dock cable, can use car controls to change tracks on ipod apple firmware and rockbox)
I'm currently using using build adaba2b-160820
Installed and tested with both the beta and stable installers from https://files.freemyipod.org/~user890104/bootloader-ipodclassic.html

I’m having weird problems with a 160Gb 6G Classic (yes I know it’s unsupported/unstable).

With emcore and rockbox it works fine. Connecting it to my computer the USB works as expected and everything is great (copied 100Gb+ of music to it with no trouble).

However… when I connect it to either of my cars (via USB), the iPod shows the USB screen for a few seconds then goes back to the Rockbox menu and locks solid. It then needs a MENU+Select to reboot it.

Using a USB flash drive in both cars (different head units) works fine and I can navigate around the filesystem and play music. I did notice that the flash drive was partitioned, not ‘superfloppy’, so I setup my iPod with 1 partition and stuck rockbox on that…. didn’t make any difference though.

Someone suggested that the head units (Kenwood and OEM Jaguar) might be detecting the device as an iPod from the USB ID and then ‘doing something special’. So I compiled my own rockbox from git source changing the USB ID and VENDOR to 0001. I then verified the change by doing a lsusb on my Linux box and the ID showed as 0001:0001.

Sadly this makes zero difference to the iPod’s behaviour when connected to my car(s).

Does anyone have any suggestions? I’m happy to recompile, grabs logs, insert code etc

Here’s the rockbox-info.txt from the one I built:

Target: ipod6g
Target id: 71
Target define: -DIPOD_6G
Memory: 64
CPU: arm
Manufacturer: s5l8702
Version: 189148eM-130128
Binary: rockbox.ipod
Binary size: 646268
Voice format: 400
Actual size: 646260
RAM usage: 1755172
Features: accessory_supply:backlight_brightness:crossfade:dircache:headphone_detection:hold_button:hotkey:lcd_bitmap:lcd_non-mono:lcd_color:lcd_sleep:morse_input:pitchscreen:quickscreen:rtc:swcodec:tagcache:tc_ramcache:charging:usb_charging_enable:wheel_acceleration:lineout_poweroff:large_plugin_buffer:albumart:disk_storage:scrollwheel:usb_power:usbstack:hardware_click
gcc: arm-elf-eabi-gcc (GCC) 4.4.4
ld: GNU ld (GNU Binutils) 2.20.1.20100303
Host gcc: gcc (Ubuntu 4.4.3-4ubuntu5.1) 4.4.3
Host system: Linux

http://www.konscience.de/wp-content/uploads/kns017-maertyrer-gegen-copyright.m4a

The current build as well as 3.13 report and then fail:

parsing /kns017-maertyrer-gegen-copyright.m4a failed (format: ALAC)

However, foobar reports:

Codec profile : AAC SBR

Which is likely correct given that the bitrate is far too low to be ALAC.

I downloaded some AAC files from the bbc, using the get-iplayer utility. The files play just fine on the computer, but on my rockboxed Clip+, they seem to freeze up the player entirely. I have to hold the power button for a long time to reset it. I just tried updating to rockbox 3.9, but I'm not seeing any difference with the new firmware.

When I play the file in mplayer, it gives the following info:
major_brand: M4A
minor_version: 512
compatible_brands: isomiso2
encoder: Lavf52.64.2
========================================================================Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding)
AUDIO: 44100 Hz, 2 ch, s16le, 48.0 kbit/3.40% (ratio: 6000→176400)
Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio))

RB does not play AC3 tracks which were extracted from DVD with splitting one-track/one-song (splitting by chapters).

In other words - if you extract single AC3 song RB will not be able to play it back, despite the fact foobar2000 and Winamp with AC3Filter plugin will play it fine.

It is not a problem related to extracting software as the problem occurs for AC3 files saved by DVD Audio Extractor and SmartRipper. (Files saved by them are bit-bit the same as file comparison showed).

Simulator does not display any debugging info when you try to play AC3 file which RB is unable to play.

AC3 playback is not completely broken because RB plays AC3 files if you extracted full AC3 track without splitting it.

On my X3, it triggers the MIPS equivalent of a segfault. (directory has 792 entries, tried to access it with only 500 allowed)

Rather than crashing outright, I think it would be better to detect this and somehow error out gracefully?

Hello.

Can you somebody add some info about using talkclip for shortcuts.txt
in manual section 5.14 Shortcuts.

I'd recommend replace this

 "talkclip: <filename clip of a talk that speak When voice menus are enabled>"

for this

"talkclip: <filename clip with full path of a talk that speak When voice menus are enabled
 (example /.rockbox/filename.talk)>"

I suggest this because I took a long time before I figured out how it should be properly.

I’m using 42a725f, and after frequency scaling implementation, sometimes the player slowdown extremely, being unusable (don’t stop playing, only small gaps in audio occur).
Less frequently, the player freezes.

I noticed it’s happens more frequently if the device is just powered on, and hits play. If I wait a few seconds before resuming play, the freezes are less frequent.

- How often does this happen?
* Frequently, about 2 o 3 times a day (4 hour average playback time, with several shutdown/boot in the middle)

- playing which file format (mp3, ogg, flac, mpc, etc…)?
* Confirmed with mp3 and flac

- which lcd is your device?
*st7783

There is an ALAC playback problem in daily builds (since 2014-11). The playback somethimes works for one song but then crashes and shows ALAC file details as "? kbit/s", "0 MHz", "0 MB" and nothing happens when I press the Play button. After reboot the problem occurs again. It makes the ALAC playback impossible.

Now I'm using revision 9cb9f76M-140326 with patches from aroldan:

https://www.dropbox.com/sh/b5xbw6cp4ikfxwn/MjELjmDNJ_

With this build there are no ALAC playback problems.

I would like to leave my player charging overnight and have it resume playback in the morning to wake me.

My player remains on when charging and cannot be turned off.

The alarm does not resume playing if the player is already on when the alarm time passes.

I suspect this probably applies to all players, mine is a Sandisk Sansa Clip+.

Rockbox info says v. 3.13 - the stable build grabbed by RockboxUtility, which this bugtracker doesn’t seem to know about yet.

Starting from the daily build from mid August (can’t exactly say when, because I don’t play MIDIs so often), the MIDI playback on my iPod 5G 30GB sounds distorted, especially the Piano sample.

It sounds as if the higher frequencies are chopped of and instead replaced by “alias frequencies”. Maybe something has been messed up in the mixing routine concerning decimation filter / interpolation.

I am using the original patchset provided here at rockbox.org.

Maybe somebody could check this - thank you!

Keep up the great work!

Version 9e186e34ab-190820

i have an ipod 7th gen
rockbox installed
140.000 titles

database contains in unpredictable many cases of the folders 2 times the same title
not in all folders, but it happens very often that i open one and i see all titles 2x although they are only 1x on the sd card

the files exist only ONCE
but the database keeps listing them all 2 times

i rebuilt it several times, but the database keeps on doing that

any hint what i can do?

start as apple / itunes and delete rockbox folder / install new did not help

I've hunted this down here is what I found out.

from
http://developer.android.com/reference/android/view/KeyEvent.Callback.html

public abstract boolean onKeyDown (int keyCode, KeyEvent event)
Since: API Level 1

Called when a key down event has occurred. If you return true, you can first call KeyEvent.startTracking() to have the framework track the event through its onKeyUp(int, KeyEvent) and also call your onKeyLongPress(int, KeyEvent) if it occurs.

We need to return true and call KeyEvent.startTracking() from /android/src/org/rockbox/RockboxFramebuffer.java then set the interrupt flag from /firmware/target/hosted/button-android.c and find out what is passed back after a key release and handle that. I may not be a great programmer but this looks like the ticket to removing the BUTTON_REL work around from /firmware/target/hosted/android/app/button-application.c

On my newly purchased (but used) Archos Internet Tablet 70 250GB with Android Version 2.2.? (Froyo) I installed the daily build of rasher. Everything works so far, but playback of MP3 (mostly 160 Kbit CBR and ~200 Kbit VBR) pauses briefly every 2 to 3 minutes. I just reformatted the drive, which now has ext3 and that seems to end the pause which I got on FAT32 after ~4 Seconds of every new song, but every 3 minutes or so the playbacks stops for about a second - very annoying. Don't tried other codecs as I don't own any files other than MP3.
I was in the developers menu during one of this pauses, looking at the list of the contributors. The old names fly away to the right, but this was frozen also during this one second timespan - as if the rockbox-process was paused entirely or so.

I’m using revision 29572 of android port. Host system is Samsung Galaxy 3 i5800, with 240×400 resolution display, with version 2.2 (Froyo) of Android.

The problem is as follows. When trying to start playback of OGG or SPX files, the playback does not start occasionally (the change is maybe less than 20% to have playback). By rewinding randomly it is possible to get it start playback. The same behaviour occurs when starting from bookmarks and from file explorer. The problem occurs with default config file.

Tried with MP3 and had the same problem. The problem may be with other codecs as well but I have not tried it so extensively.

Best

On build 30622 and previous builds, there is an issue with resuming playback.

When "Resume Playback" is selected from the menu, you transition into the music control screen but there is no output aside from some crackling noises.

Occasionally, the song would play for half a second before silencing.

The play/pause button during this situation shows a pause symbol which suggests that the song is supposed to play. However, the song progress bar remains at 0:00.

Currently on Cyanogenmod 7.1 nightly, Android version 2.3.5.

1. tested devices: Samsung Galaxy Tab 7" and Android 2.3.3 AVD
2. tested revision: custom r30556 and rasher's unmodified r30562

3. condition: goto home screen by pressing 'Home button', then return to rockbox

4. symptom : any action that calls yesno screen(rename, delete, or 'Erase dynamic playlist', etc) will make rockbox unresponsible.
The only thing I can do is go to home screen then kill rockbox service.

5. If I go to home screen from main menu by 'Back button', the problem doesn't occur.

After upgrading from 3.13 to 3.14, when playing most of the ogg vorbis files in my library, a "beeping" sound sporadically occurs.

The sound is random (2 consecutive playbacks of the same track will beep on the same time).

All the files played fine with 3.13.
MP3 files play just fine (I have not tested other formats yet).

Possibly interesting facts :
Vorbis files with a lower bitrate (<100kpbs) seem to be less subject to this beep.
It seems beep never occurs when screen is on.

Problem found in versions r29044-110113 to r29143-110126. I could not test 3.7.1, because it did not recognize my 16 GB Transcend flash card (fixed in above versions).

At the beginning of tracks and during rebuffering of longer tracks there is a short humming sound (like a bumblebee) mixed with a fast sequence of random high frequency tones. The sound differs as a function of data format and content. It is very homogeneous with WAV tracks (only humming) and different with lossy and lossless codecs. The same file encoded with FLAC and AAC leads to different short distortions. It is only audible for tracks with initial silence or very dynamic content, for example classical music with quiet passages or audio books. With sensitive headphones, this can be quite annoying.

The original firmware does not show this behavior!

It only happens while reading from the SD card, not from the internal storage.

Initially I thought this might be a CPU throttling issue. But now I think it might also be related to the controller driver.

There is a thread on Hydrogenaudio with independent confirmations of the issue:

http://www.hydrogenaudio.org/forums/index.php?showtopic=86306

If I can provide any additional information to help, please let me know.

Hardware: iriver H140, iriver H340, Sansa Clip+

Rockbox version: 3.10 downloaded from http://www.rockbox.org/download/byhand.cgi I have also reproduced bug on official firmwares as old as 3.5.1, and on my own builds.

Settings: 100% default except for enabling EQ and setting an EQ i.e. using graphical EQ to set LS -0.5 at 60Hz or LS +1.5 at 60Hz

Expected behaviour: music track, however loaded, starts in normal way, with no sounds other than those decoded from file. Restarting the track results in the same normal playback.

Actual behaviour: music track starts with an obvious and intrusive click. This happens whether the track is loaded individually, or if it is the first track of an album loaded via .m3u playlist. When using playlist subsequent tracks play normally, without a click. But restarting any track causes the click.

It makes no difference if the EQ Low Shelf Filter settings are a big change from flat, or a tiny difference. To induce the bug it’s enough that EQ is enabled and LS is not set to be flat i.e. just an increment of +/- 0.5 dB is enough, and changing the cut off frequency or the Q factor made no difference.

This bug is noticeable with any track that starts quietly, and especially with tracks from CDs that are not mastered to modern high levels.

The Clip does tend to make its own small click on manual track changes and some button presses; I am not confusing this with the bug I describe. On the irivers I get a single click, while on the Clip I get a very unmusical double click.

I’ve attached my H140 config to illustrate that the config is unremarkable and that apart from the EQ it is at default. If anyone needs me to try stuff or make any changes or try a patch that is fine, but I would prefer it to be on an iriver because the Sansa OF database refresh is so annoying.

Playing APE 24/44.1 with harsh noise in different parts of the track. If you decode APE file to WAV using the codec console, then there are no problems. So the matter is in the player’s APE decoder.

At 24/48 everything is fine.

Hardware: Clip+ 8GB using internal memory
Problem: Playback of most APE files results into passages of loud noise during playback. The music is totally gone and noise is ear deafening loud. When rewinding, till music is heard, and replaying the problem part, error can be reproduced _sometimes_.
In other cases it either runs fine, or the problem occurs elsewhere in the file.

Since the problem does not always occur in a specific part of a APE file, it is hard to attach a sample file.

Problem persisted between ape files encoded in high and normal setting.
Using winamp + monkey audio 3.99 APE plugin, these files never shown problems.

r30804
The rockbox (r30804) Can't play ape files with CUEsheet (APE + CUE files).

I have an upgraded iPod 5.5 with CF 32Gb installed in CF-ZIF adapter.
Both iTunes & Rockbox are working fine with this setup.

Then I tried to increase the storage space by using mSata SSD 64 GB + mSata-ZIF adapter. iTunes recovered the iPod successfully and it is working just fine. I installed Rockbox latest stable (non-stable latest = same thing) version & after the Rockbox boot-up it reporting an ATA error -11.

I wonder if this can be solved.

Thanks!

I have RockBox version 3.9 on my Sansa Fuze v2 and so far I love it, but I have one problem. On a few tracks in my library, when I play them, the first few minutes of the song will be strangely distorted. Most of them are songs where the music starts off in just one of the speakers before moving into the other one. There will be bursts of loud, crackly noise in the other speaker during these first few seconds (that seem to be in time with the music) and then it will fix itself and the rest of the song will play perfectly. When I boot the default Sandisk firmware the songs play perfect like they should, it is only in RockBox that this glitch happens. I’ve messed with the settings a bit and even reset them completely, but nothing has worked thus far.

Attached is one of the songs that this happens with, from about 2 seconds in to about 7 seconds in. Any help would be greatly appreciated. I really want to enjoy my music without that crap in it.

Experienced Results:
I have 2 folders(lets call them FolderA and FolderB) each containing audio files.
FolderA and FolderB are both on the root of my drive
Neither one has a database.ignore file in it.
I go to settings → general settings → database → update now
All files are added to the database as expected
…But i realize i dont want FolderB to show up in the database.
I add a database.ignore file at /FolderB/database.ignore
Then I go back in and update the database again(settings → general settings → database → update now)
all of my audio files still show up in the database(including the ones in FolderB with the database.ignore file)

Expected Results:
After adding the database.ignore file to FolderB and updating the database(settings → general settings → database → update now) the audio files in FolderB should no longer appear in the database

Summery:
Any files in a folder containing a database.ignore file should be removed from the database on update

Rockbox Info:
Build Version: daily / e3cddc2-120701

There is different level audio between Radio and Music Playback with the same db value. Level audio on Music Playback is too low.