The LCD is highly unreliable: sometimes it displays dots and sometimes it stays black.
Example:
http://forums.rockbox.org/index.php?action=dlattach;topic=13462.0;attach=6384;image

I have an upgraded iPod 5.5 with CF 32Gb installed in CF-ZIF adapter.
Both iTunes & Rockbox are working fine with this setup.

Then I tried to increase the storage space by using mSata SSD 64 GB + mSata-ZIF adapter. iTunes recovered the iPod successfully and it is working just fine. I installed Rockbox latest stable (non-stable latest = same thing) version & after the Rockbox boot-up it reporting an ATA error -11.

I wonder if this can be solved.

Thanks!

when i pressed the fm radio it’s. but when i press off it sounds like it’s still on and beeping. i’ve got all the settings of for beeping and it’s still on the fm radion i mean. this weird bug i know. please do fix this bug thanks

When playing music, I can hear codec errors in the music. It occurs every time on a certain song, and other songs that are smaller in file size, it does not occur on, but occurs on the next one. I believe it is a buffering issue, and makes the music unlistenable. I used the daily on 10/21/2015

On 320kb/s MP3s it occurs much more often, and 128kb/s MP3s it occurs less often, but when it occurs its a series of glitches that distort the music.

I am sure its not the MP3s themselves, because it doesn't occur in the official firmware, and when I rewind it, it does not make the same sound until later. It has a very prominent 'glitchy' sound and later it changes the speed of the song.

I replaced it with the 3.1.3 MP3 codec, and the same glitch occurs.

I do not have a line out so its made through the speaker, but the problem is so bad that you can hear it very clearly.

The MP3 was 320kb/s

Memo is the glitchy one, and Memo-1 is it being played correctly.

Back button does not work, and sometimes the same function as the forward button.
Rewind button does not work
Of course, I am talking about are the physical buttons，Touch buttons are working properly。

Previous song and Fast Backward are unable to work

Hi,
I've been using the development version of Rockbox in my ipod classic 6th generation for about two years I think, but from some time, like a month or two, I'm experiencing playback issues as the track I'm listening suddenly skip forward or backward, or even jump for a few seconds on another mp3 file inside the ipod I was just listening before. I don't think is a ipod issue because I can listen the file inside the ipod with my computer player without problems.

There some way I can check older development revisions for the classic? It appears that it doesn't show in the dev build link on the site because is not fully supported. Thanks

For a couple of months my Sansa Fuze v2 has been crashing randomly when playing music. Most of the time I just get a white screen with an error message. The last message I got was :

'undefined instruction at 0006DC8C'

(I think that last number varies at each crash)

This didn't happen with v3.13, but it's been happening with every daily build I've tested IIRC.

It doesn't happen very often so it's hard to reproduce. I listen to music in public transports about twice a day and this happens not more than once a week. It seems to happen more often when the battery is low (less than 10%). It generally happens early in a playback session, when the first or second track is played.

Sometimes I don't get a white screen, but the program freezes and some parts of the interface are surrounded with white frames. I don't know if it's the same bug or if it's unrelated.

Note that I'm always listening to music on a microSD card, and I haven't tried on the main memory.

PS: I chose "Sansa Fuze+" in the OS list because I couldn't find Sansa Fuse v2.

Rockboxutility barfs while creating talk files if it encounters unpronouncable charicters (japanese kanji) and does not continue afterwords resulting in talk files not being copied to the player.

[talkgenerator.cpp:156 INFO] voicing: "シマシマ" to "/tmp/talkfiles/952b0e2854336082e41fb0ef8ef8dc97.wav"
[ttsfestival.cpp:188 INFO] Voicing "シマシマ" → "/tmp/talkfiles/952b0e2854336082e41fb0ef8ef8dc97.wav"
[rbsettings.cpp:162 INFO] GET U: "festival-client/path" "/usr/bin/festival_client"
[ttsfestival.cpp:194 INFO] Client cmd: "/usr/bin/festival_client –server localhost –otype riff –ttw –withlisp –output \"/tmp/talkfiles/952b0e2854336082e41fb0ef8ef8dc97.wav\" –prolog \"/tmp/RockboxUtility.zowYwG\" - "
[:0 WARNING] QProcess: Destroyed while process ("/usr/bin/festival_client") is still running.

/
The result of this is an invalid wav file wich the the encoder bails out on and the process aborts.

[talkgenerator.cpp:235 INFO] encoding "/tmp/talkfiles/952b0e2854336082e41fb0ef8ef8dc97.wav" to "/tmp/talkfiles/952b0e2854336082e41fb0ef8ef8dc97.talk"
[encoderrbspeex.cpp:82 INFO] Encoding "/tmp/talkfiles/952b0e2854336082e41fb0ef8ef8dc97.wav" to "/tmp/talkfiles/952b0e2854336082e41fb0ef8ef8dc97.talk"
[encoderrbspeex.cpp:103 ERROR] Error: invalid WAV file
[ttsfestival.cpp:29 INFO] Destroying instance

I suggest ignoring failed encoded files and continuing encoding and copying the files that suceeded.

Neither of the tools, ipodpatcher or Rockbox Utility 1.4.0, work on macOS Catalina.

Catalina removed 32bit support.

Using ipodpatcher generates the following error:

bash-3.2$ ./ipodpatcher
bash: ./ipodpatcher: Bad CPU type in executable

And Rockbox Utility has a white circle with a line through it indicating that it does not work with this version of the OS.

(see attached file)

Rockbox crashes after USB unplug.

I am having a couple of problems with Rockbox on my iRiver H140.
The first issue is that all my songs in the files folder are displaying only in the order
that they were uploaded onto the machine. If I go into the settings and choose to display
Artists in alphabetical order it doesn't have any effect! I am left to endlessly scroll through
the names or listen through the iriver player which doesn't play WAVs or FLACs so i can't access everything.
Secondly, if I start up and resume playback of an album it doesn't then allow me to access the files folder when I navigate to it. I have to then restart my player and go to files from there. If I later come out to the main menu and choose Files, or any folder for that matter, it won't open. It's really frustrating. Any ideas of a fix?

For the last couple of weeks, I can’t get Rockbox to run anymore on my phone. I use Rasher’s build, which used to work fine. I even built one on my own, but it still doesn’t work. I tried running it on the emulator and it worked fine. I am not sure what is wrong, reading the logcat gets me nowhere because I don’t really understand most of it. I have attached the logcat here. I do not know if I’m the only one having this problem.

I tried various method to get it working again on my phone, I even tried resetting my phone in case if I messed up somewhere. I also noticed this when I was trying out another ROM for my phone, which runs on Gingerbread 2.3.7. I thought it was the ROM’s problem, so I changed back to the ROM that I frequently use, which used to had no problems at all running Rockbox. The last working build was on 01 March 2014, after that, nothing works anymore on my phone.

The only possibility that I can think of is that my phone is outdated and the kernel or the ROM is missing something crucial to run the latest Rockbox builds. Other than that, I have no idea. I hope the logcat attached could help you identify this problem. Thank you in advance.

Build version: 915bc09-140318
Last working build (on phone): unknown revision, dated 01 March 2014
Phone: Sony Ericsson Xperia X10
Android: 4.1.2 Jelly Bean (CyanogenMod 10)
Emulator: 4.1.2 (API 16) with same screen dimension.

Hi.

I noted a strange bug on mpio hd300 player. 2/3 of the times ,when i lock the player with HOLD ON button, and return to HOLD OFF, the volume keys do not work anymore,however, the others keys works OK (menu, FF,REW,PLAY and REC). only after a reset, these keys (volume) works again.

The release of RB is 3.13

I try other releases, from 3.11 to 3.12, and the problem is the same.

thanks

Create silence in Audacity program (Generate → Silence). Convert the wav file to ogg vorbis file. Put into the sansa clip+ player wav and Ogg files. Turn on the equalizer and set 32 hz, 64 hz, 125 hz in the 0.5-2.0.
Turn on maximum volume. Listen to the silence of wav file. Absolute silence. Listen Ogg Vorbis file - hear the noise (like the wind). It’s bug with only ogg vorbis. mp3, flac, mp4 is absolute silence.
On a musical files it’s additional noise. Ogg vorbis is economical of disk space. Testing on a sansa clip+ with 2GB.

When playing music sometimes crackling sound especially when playing bass

I downloaded this: https://www.youtube.com/watch?v=Lrb0dHKJBR4 using the youtube-dl python program. The file plays and seeks correctly in foobar2000 and MPC-HC. But, on my clip+, whether I seek 10 seconds or 10 minutes into the file, it ends up playing a position of the file previous to the one displayed. For example, if I seek 50 seconds forward from the beginning, it will play the file from the start, while the screen still displays as if it's playing from 50 seconds onwards. Seeking to the end of the file will have it play a section from about 2 minutes earlier than it should be, while the time display and music will continue until 1:14:20, with the file actually being 1:12:46.

I did not hear the files being played slower than they should be, so it seems it's only an issue when seeking.

I've confirmed this happens on every AAC file downloaded by youtube-dl, and that re-encoding the same file to AAC using NERO encoder makes the problem dissapear.

Dear Rockbox, long story short after doing update to the latest daily build c6d5cd7(2017-09-11), after playing music for around 30-40 minutes the screen start to freeze cannot scroll or select anything on the screen even turn it off is not possible but after few seconds it turn off by itself and can be turn on normally after that.

I use a 64 GB MicroSD card in my Clip Zip and the stock firmware recognizes it. Rockbox recognizes it in the debug disk info screen and when connected to a computer via USB, I can read and write it through rockbox. However, when I try to access it or when I just check the regular rockbox info, rockbox does not show the SD card, nor can I play music from it.

The bug is also present in the current development version and is overall very similar to this one: https://www.rockbox.org/tracker/11798

I tried reinstalling rockbox and reformatting the SD card, but nothing worked.

Click on the music file and die

Version 9e186e34ab-190820

i have an ipod 7th gen
rockbox installed
140.000 titles

database contains in unpredictable many cases of the folders 2 times the same title
not in all folders, but it happens very often that i open one and i see all titles 2x although they are only 1x on the sd card

the files exist only ONCE
but the database keeps listing them all 2 times

i rebuilt it several times, but the database keeps on doing that

any hint what i can do?

start as apple / itunes and delete rockbox folder / install new did not help

Playing 320K MP3s pauses often in Version 3.15 and daily build 7d00533 also UI becomes unresponsive
Version 3.14 or older does not reproduce the issue in either 44 or 48khz sampling rate and same sound options
Is not reproducible under OF or Version 3.15 running on IPOD 6G
seems to be a cpu usage issue as compiling a version of rockbox with much higher than stock CPU clocks seems to alleviate the issue to an extent but there is still occasional pauses that is not present after reverting to 3.14 and stock 80 mhz clock speed.

With my theme “lebellium Samsung-like” for Clip Zip there are some display issues in FMS, more precisely the status bar, while the code is the same as in WPS and SBS. See the pics in attachment.

How it should look like instead:
http://themes.rockbox.org/themes/96x96/lebellium_samsung-like_%28big_aa%29_96x96_v1.00/3-FM_radio_bigAA.png http://themes.rockbox.org/themes/96x96/lebellium_samsung-like_96x96_v1.45/2-FM_radio3.png

After bisecting, I found out that the 1st bad commit is acf3af4 by JdGordon: radio: fix  FS#12747  http://git.rockbox.org/?p=rockbox.git;a=commit;h=acf3af4

Using release 3.13 on the clip zip, if I were to put the main crossfeed setting on the right button of the quickscreen, it would cycle through to custom but then stop. If I use the left button of the quickscreen, then after custom there is a data abort crash.

Using build c64b59f-140304, both the left and right quickscreen buttons work to cycle through all 3 settings for crossfeed, but I can still trigger the crash if I use the left button. It seems to be sporadic and timing dependent, because if I click through the options quickly it works fine, but if I slow down and hold the buttons for longer at a time then it will eventually trigger.

Here is a picture of the crash: http://i.imgur.com/wS1CqVr.jpg The text is:
Data abort at 30800E
FSR 0x8
(domain 0, fault 8)
address 0xB00Fb5D
pc:30800BA8 sp:300<snip> the screen is too narrow, here
bt end

I cat choose folders to be scan into database. When I select some folder I don’t get confirmation if I want scan database, when I back to screen with folders none of selected folders are selected. I try to set them in config file manually and reread file into rockbox after start but it didn’t help either.

If I can collect some logs or screenshot pleas tell me how I will do it.

Been using Rockbox for years, so it was really obvious when things got messed up somewhere in 3.12~3.13. In a nutshell, with this release, in a 1000+ playlist, I’m listening to the same songs over and over again when shuffle is on. To fix the issue, I have to turn shuffle OFF and then flip it back to ON every time I start a player. Never had this problem before. Don’t know if this affects all devices or just my H340 (yes! still going strong!).

There is an ALAC playback problem in daily builds (since 2014-11). The playback somethimes works for one song but then crashes and shows ALAC file details as "? kbit/s", "0 MHz", "0 MB" and nothing happens when I press the Play button. After reboot the problem occurs again. It makes the ALAC playback impossible.

Now I'm using revision 9cb9f76M-140326 with patches from aroldan:

https://www.dropbox.com/sh/b5xbw6cp4ikfxwn/MjELjmDNJ_

With this build there are no ALAC playback problems.

Rockbox version 3.13
Wenn I delete a file being played, it continues to play (which is OK for me). But when I rewind in this file while playing, Rockbox hangs and does not respond to any key presses. The screen light stays on. I have to press the hard reset or wait until the battery is empty.

This also sometimes happens when I press fastforward, but it always happens when pressing rewind.

Desired behavior:
- Preferred: permit rewinding/fastforwarding (and really delete the file only after stopping the replay)
- ignore rewind/fast forward; alternatively
- skip to the next file immediately after deleting.

Thanks for reading, and please contact me if you cannot reproduce this! I have a Iriver H140 and I must say that all my recordings are in wavpack (recordings made using SPDIF-IN), so I do not know whether this also happens with other file formats and with other players.

-Stefan

On my iPod Classic (160GB), the hold switch is not being detected anymore by Rockbox.
Switching the hold switch does cause the buttons to stop responding and vice versa, but Rockbox is unaware of this event and continues to act as if it didn't happen. My backlight won't turn off when I switch hold like it's supposed to, and I can't exit plugins that have a hold switch activated menu like RockBoy.

I am using build c3c2c91, I just updated today.
This bug has been present since as early as January, and I am aware that a task already exists for it, but it's buried deep because the poster marked it as Low severity.

Heyup,

I’ve recently updated the build on my zip and the radio volume is greatly reduced. It`s very noticeable since I use a passive speaker connected straight to the player (top volume required). Volume of file playback is unaffected.

Here’s someone describing the same issue-
http://www.anythingbutipod.com/forum/showthread.php?t=74910

Same symptoms including (notably) normal volume in the recording screen (gain=0), and region settings make no difference.

I have no note of which build I had before the update but it was from around the end of 2014. Looking thru the changelog yielded no clues.

trunk 983c808-150717

Expected sorting by artist name, then by album and then by track number, but now all songs by all artists sorting by track names in alphabetical order.

Hi,
I’m trying to record myself playing the guitar using my old, trusty FuzeV2 (both a very old version - sorry didn’t wrote it down but had to be at least a couple of years ago - and today’s version 87229a4). Recording parameters as follows:

Trigger: Repeat
TrigType: New file
Prerecord Time: 1s
Start Above: -22dB
for at least: 1s
Stop Below: -26dB
for at least: 1s
Presplit Gap: 1s (don’t really understand what it does from the manual, but it says it usually has to be the same value of the Stop Below Time, so…)

Recording starts correctly when noise is detected according to conditions; then apparently it correctly detects the silence and stops the recording. But immediately the ‘Repeat Trigger’ parameter kicks in and _immediately starts a new recording_. At this point, the trigger status and the recording status aren’t matching anymore. The recording screen shows the recording file size growing, but the Trigger status is ‘Ready’. I have confirmed that on the actual file on disk the silence is meanwhile recorded.

Did I understand any of the parameters wrong or has anybody else the same problem?

build 00a3658. files dont list or play alphabetically regardless of setting in file view menu.

Rockbox doesn't speak in the FM mode with voice configured. I tried it in my local language (spanish) and in english with same results. Apparently it is not a problem of the translation, because sometimes (only 2 or 3 times in at about one year that I'm using the player) the player speak some words. This works correctly in release version.
My actual version is 0f89b04, but it happend in all dev versions.

When playing music sometimes crackling sound exist but after 5-6 secs playing it dissappear
i tried to update until the last rockbox firmware (ver.b045e4d date 2016-11-01) the problem still there

but if i boot to mango (stock fw) no crackling sound remains

Device : Ibasso DX90

After upgrading from "Version: 33856d9-161111" to "Version: 6436c6e-170211" Resume Playback from the main menu does not work. Here are the steps taken to verify the problem:

Running Version: 6436c6e-170211… Reset config
Using default settings, enabled Shuffle via Shortcuts
Started playlist; track identified as 1 of 5330
Skipped ahead to the 5th track
Paused @ 1:01
Forced shutdown
Enabled Hold switch
Waited ~1 min., then booted via disengaging Hold switch
Clicked Resume Playback… resumed on the same first track (1 of 5330)
This behavior occurred every time I attempted to Resume Playback.

Restored previous version (Version: 33856d9-161111)
Rebooted
Reset Settings
Using default settings, enabled Shuffle via Shortcuts
Started playlist; track identified as 1 of 5330
Skipped ahead to the 5th track
Paused @ 1:01
Forced shutdown
Enabled Hold switch
Waited ~1 min., then booted via disengaging Hold switch
Clicked Resume Playback… resumed on the fifth track @ 1:01

FWIW: No Bookmarking used (never have). Database not initialized (never use it).

After upgrading from 3.13 to 3.14, when playing most of the ogg vorbis files in my library, a "beeping" sound sporadically occurs.

The sound is random (2 consecutive playbacks of the same track will beep on the same time).

All the files played fine with 3.13.
MP3 files play just fine (I have not tested other formats yet).

Possibly interesting facts :
Vorbis files with a lower bitrate (<100kpbs) seem to be less subject to this beep.
It seems beep never occurs when screen is on.

Ordinarily, when Rockbox is shut off and turned back on, it will remember the position in the last-played song, and begin playing from where you left off. However, in the latest build, Rockbox doesn't remember the last track that was playing if the file used a relative path. This happens on every version of 3.14 including the current daily build (2017-11-13).

Here is how the error can be reproduced:

Have a folder with two songs. Then, in the parent folder, create two m3u playlists named "absolute.m3u" and "relative.m3u".
.\
—absolute.m3u
—relative.m3u
—MUSIC\
——song1.ogg
——song2.ogg

In the absolute.m3u playlist, add the following lines:
MUSIC\song1.ogg
MUSIC\song2.ogg

In the relative.m3u playlist, add the following lines:
.\MUSIC\song1.ogg
.\MUSIC\song2.ogg

To see expected behavior:

1.) Open the files list, and run absolute.m3u and song1.ogg begins playing.
2.) Push right to start song2.ogg. Let it play a few seconds in.
3.) Turn off your device by pressing power.
4.) Turn on your device with the power button.
5.) song2.ogg continues to play the same song at the same location as when it was shut off.

To reproduce the bug:

1.) Open the files list, and run relative.m3u and song 1 begins playing.
2.) Push right to start song2.ogg. Let it play a few seconds in.
3.) Turn off your device by pressing power.
4.) Turn on your device with the power button.
5.) song1.ogg plays from the very beginning.

The file format of the songs doesn't seem to matter (I've tested ogg and mp3).

I think commit 1654efc31339972d0e6bd41a499fcffc0a45822e introduces the following error:
storage_init in firmware/storage.c does not return an rc error code in case !CONFIG_STORAGE_MULTI
because its discarded here:

#else /* ndef CONFIG_STORAGE_MULTI */
+ STORAGE_FUNCTION(init)();
+#endif /* CONFIG_STORAGE_MULTI */

+ storage_thread_init();

   return 0;

I primarily use my unit for audio books while driving, but the latest build (as I write this) won't play one of the files properly. It tries to start, stuck at 0:00. Trying to seek hangs the player altogether, requiring a hard restart.

I've recreated this problem on a flaky Clip+ and an AGPTek Rocker.

The 'file' tool identifies it as: ISO Media, MP4 v2 [ISO 14496-14]

Here's what mplayer has to say (while playing it back properly):

[lavf] stream 0: audio (aac), -aid 0, -alang eng

I am trying to build Rockbox for Sony NWZ-380 from Git repo, commit ce0b31d87db3c4c1c1bfb535c50770d33e9c4aaf.
arm-elf-eabi-gcc version 5.4.0, ARM binutils 2.30.
Everything goes smooth until just the latest step where this happens:

… LD duke3d.ovl
LD bmp.ovl
LD jpeg.ovl
LD png.ovl
LD ppm.ovl
LD gif.ovl
LD rockbox.elf
/usr/libexec/gcc/arm-elf-eabi/ld: section .ARM.exidx VMA [00000000600a9548,00000000600a954f] overlaps section .bss VMA [00000000600a7f20,00000000600ff773]

I'm using Rockbox on my NWZ-384 for a couple of years now and there were no problems building it in the past. I also was very glad that NWZ-380 port reached stable status in 3.14,
but now something seems to be broken (not terrible it seems, just requires some adjustments to the linker scripts but still).

I store the album art by putting a folder.jpg file in the album's directory.
Any WPS on other players shows the cover pictures properly if album art is enabled in the theme.

I am aware of caveats like progressive jpgs, that are not supported by RB.

In the attached zip file, there are four directories with a folder.jpg file and a free opus file for demonstration purposes.

All pictures show up fine on my Sansa E200 (v1) using CabbieV2 or lebellium_Samsung-like.
However, on my XduOO x3ii the pictures are not displayed for the examples 1 - 3, but show for example 4.

None of the jpgs are progressive and I cannot figure out a difference between 1-3 and 4.

I don't know how to debug this further myself, but would be happy doing any furter experiments.

This is true for the current dev builds, e.g. b450707955.

Playing APE 24/44.1 with harsh noise in different parts of the track. If you decode APE file to WAV using the codec console, then there are no problems. So the matter is in the player’s APE decoder.

At 24/48 everything is fine.

Whenever the HOLD switch is turned off, the hold icon in rockbox disappears, but hold actually doesn’t let go. I can’t use any keys until scroling is used. Scrolling left or right is the only thing that actually switches off hold. It can be pretty annoying as I use HOLD a lot.

When using the H300 non-lcd remote to turn on the player (iriver H340) I get the following error message “hold switch on, power off…” (the hold switch is not on).

I know that the folks that added recording functions to the PP targets only did it as a proof-of-concept, which rteally works well already. I am curious if anyone has looked into the bizarre noise that is generated on the right channel, I have tested this on two different 4g grayscale ipods and on 5.5g ipod. The noise level is lower in the 5.5g than the 4g's. I have attatched a png of jamin running a "silent" recording (no mic connected) and the wavpack file. I amplified the sound to get it to register higher on my spectrum analyzer.

Pressing the remote volume UP key on my iriver 140 in wps sometimes results in directory skip.
This is not easy to reproduce, but I was able to repeat once that problem in conditions where I'm sure that the directory skip key wasn't pressed.

I don't know if it's a hardware related problem, but I've read somewhere about another user having the same problem.

This was reported in the past as part of another bug (FS #6707), and although the other one hasn’t happened anymore, this one still does.

Happens only from time to time. Scenario:

- player is playing song (in WPS), backlight off
- press stop
- only backlight goes on, playback continues

I attach this to H300 series but this may not be player specific

I'm using the newest build of Rockbox (2007-07-21) with an iAudio X5 20 GB and I have my tuner set to the European region. I encounter two little flaws in the FM-radio. I think they partially have to do with the player's hardware, but maybe Rockbox can improve the quality a bit.

1. The player is really sensitive to movement. The signal strength differs with every meter that you take the player with you. On top of that, most stations sound like they're not correctly tuned, but I can't get them any better. Maybe Rockbox could be more accurate in frequency selection? (Like 101.100, 101.125, 101.150.) I can get these stations quite well on my home radio. I don't expect the same quality from such a small device, but some finetuning would be great. The only problem is that it would take a while to scroll through the frequencies, but once set it'd be fine.
2. (I assume this is very hardware related.) The radio signal may change between stereo and mono. I have it set to stereo, but sometimes it just picks mono. I guess this is because of the hardware, since it is place related. I also didn't find any potential bugs in the source code.

What are your thoughts on this?

Oh, and keep up this good work! I really enjoy Rockbox!

Over the past month? the radio menu has been disappearing. When I reinstall the menu comes back and the radio works and the debug screen shows the radio.

When it re-initializes the DB, the radio disappears and the debug screen said that there's is no hardware.

If I manually deleted the DB files, the radio comes back…

A few other people on anythingbutipod forum have mentioned the same issue.

Still an issue August 1, 2007: r14133-070801