I downloaded some AAC files from the bbc, using the get-iplayer utility. The files play just fine on the computer, but on my rockboxed Clip+, they seem to freeze up the player entirely. I have to hold the power button for a long time to reset it. I just tried updating to rockbox 3.9, but I'm not seeing any difference with the new firmware.

When I play the file in mplayer, it gives the following info:
major_brand: M4A
minor_version: 512
compatible_brands: isomiso2
encoder: Lavf52.64.2
========================================================================Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding)
AUDIO: 44100 Hz, 2 ch, s16le, 48.0 kbit/3.40% (ratio: 6000→176400)
Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio))

The attached patch implements sinc based resampling in rockbox.
I have only tested it stand-alone so far (i.e. the code outside of rockbox – I am waiting for a replacement for my broken android phone to test it there).
There is (of course) quite some room for improvement.
Things which could be improved:
- buffer handling
- calculate the correct sinc spanning the whole table for downsampling. Then the downsampling and upsampling code would be the same (no need for sinc_increment, saving some additions). Also the result would be more accurate resampling.
- Save some memory by always calculating the correct sinc and putting it into resample_data. Would need to use fp_sincos() for that.
- Save some more memory by taking advantage of sinc's symmetry, only storing half of it in the table.

I know that I'm breaking the coding-style by using more than 80 chars in some lines. I will fix that when I have time. I wanted to get this code finally out to get some feedback after it sitting for two weeks (basically unchanged) on my HD.

The attached patch fixes a minor compiler warning on 64 bit platforms.

Using r30284

Initialization of the database, from scratch, on the Fuze v2, using a fresh SVN build, fails when committing.

It scans all files, gets to committing 4/9, then hangs at “building database, N files found”.

If I reboot, it tries to commit on reboot, stops at 4/9, then boots into rockbox with no database (ie it asks me to initialize if I try to view it).

Attached are my database* files.

This is a bug in post-3.9 code, as I don’t have the problem with a 3.9 release.

After upgrading my 1st generation iPod Nano from Rockbox 3.6 to 3.9 the cover art display does not seem to be working consistently.

When using a playlist the first track will always show the correct cover art, but any tracks after that will continue to show the first track's cover. This also happens if I skip forward or backward between tracks in the playlist.

If I manually select a file to play the correct cover will show, and if I manually select another track during the play-back of the first the cover art will change to the new track.

I have also tried this with current build r30334 (2011-08-20T13:14:30) with the same results.

Continuing from  FS#12204 , these patches remove some of the dependencies librbcodec has on the rest of Rockbox.

0001: puts equalizer settings in the parameters of dsp_set_eq_coefs, removing the need to access global_settings from dsp.c

0002: makes dsp_process yield each iteration instead of once each tick, which is tricky to do portably. If this is undesirable, I can work around it.

0003: moves some replaygain stuff around so dsp.c doesn't have to access global_settings.

0004: instead of dsp.c and tdspeed.c allocating buffers, buffers are allocated elsewhere and passed to dsp_timestretch_enable(). The necessary buffer size is determined by calling dsp_timestretch_get_buffer_size().

0005: replace get_audio_base_data_type() with audio_format_is_atomic(), removing a dependency on TYPE_PACKET_*.

0006: move autoresumable() to playback.c, removing another dependency on global_settings.

Continuing from FS#12240, these patches remove most of the rest of the dependencies librbcodec has on the rest of Rockbox.

Can't set the time of day clock

started at SVN R29234 and continues to current build.
all the builds work in the simulators but break on player.
when you enter in the settings to set clock it shows correct date but shows

00:00:00

and you can change it but it will not set returns you to settings menu and you get

1. -:–:–

unknown

built fresh svn versions each time to confirm when it started

see http://svn.rockbox.org/viewvc.cgi?view=rev;revision=30461 and http://www.rockbox.org/wiki/Main/CustomWPS#Drawing_the_lists_using_a_skin and bug me on IRC when someone finds the time to add it. hopefully the wiki has enough info though - Jd

By default logf() will output to the serial port if that is enabled (HAVE_SERIAL). This is kind of distracting if logf() is used to debug serial communication itself.

The attached patch does the following:
- make logf() only output to serial if LOGF_SERIAL is defined (defaults to undef)
- adds an advanced configure option to enable LOGF_SERIAL

The patch is against r30429.

The patch adds two new WPS tags:

1. %Ln yields the number of the list item currently being drawn

2. The operator "/?" (which can be used in the %if tag) yields the string "div" if the first operant is divisible by the second and NULL otherwise.

With these two additions it should be possible to create themes where list items are coloured alternately (as an example).

The whole work has been done by gevaerts on 2011-09-12 (and all the credits also go to him), I only placed the patch to the patch tracker, changed the operator from "/" to "/?", and changed the function name from "skinlist_get_item" to "skinlist_get_item_number".

He posted the patch on the binpaste and it would be pity if it got lost.

1. tested devices: Samsung Galaxy Tab 7" and Android 2.3.3 AVD
2. tested revision: custom r30556 and rasher's unmodified r30562

3. condition: goto home screen by pressing 'Home button', then return to rockbox

4. symptom : any action that calls yesno screen(rename, delete, or 'Erase dynamic playlist', etc) will make rockbox unresponsible.
The only thing I can do is go to home screen then kill rockbox service.

5. If I go to home screen from main menu by 'Back button', the problem doesn't occur.

There is something wrong on my iPod Video 5.5 with ROCKBOX 3.9.1. Because I change my ipod's HDD to Samsung's 32G ssd as my rigid disk, I can not enter my rockbox system.
Rockbox boot
leader version v 4.0
ipod version )x000B0011
ATA-82
partition 1 : 0x0B 15598843 sectors
loading Rockbox … Error!
can t load rockbox, ipod:
file not found

Is there something wrong with my new SSD? Or it is just a bug with rockbox which can not support my SSD

On build 30622 and previous builds, there is an issue with resuming playback.

When "Resume Playback" is selected from the menu, you transition into the music control screen but there is no output aside from some crackling noises.

Occasionally, the song would play for half a second before silencing.

The play/pause button during this situation shows a pause symbol which suggests that the song is supposed to play. However, the song progress bar remains at 0:00.

Currently on Cyanogenmod 7.1 nightly, Android version 2.3.5.

Our tick timer eats CPU even when the app is closed and music is stopped. To fix this, I added a tick_pause() and tick_resume() to kernel-android.c, to be called from java when appropriate.

I've figured out where to call pause, but the current location of resume is inadequate. The app wakes up to a black screen.

A clue, anyone?

The key lock feature on my clip+ can be circumvented. Select the last title in a directory using the file browser. Then activate the software hold. When the song finishes the Player skips to the file browser and the key lock is turned off after a button press. You can navigate around the menus until you return to the playing screen, then the key lock turns on again.

SVN r30720

I think there is a problem with a .ape codec ,when i play .ape files it will have a sound like radiosound.The time happen randomly with each .ape files and when i playback again it still happen at that time.Exp:ABC.ape will have have a noisy sound at 0:10 and when i play again it still happen at 0:10

Bluetooth dongles are not "correctly powered up". Problem experienced with ipod Video colour 30GB and following dongles:
- Sennheiser BTD300i
- Kokai i10s

When I boot the standard apple software the dongles auto pair with my headphones. When I boot Rockbox the dongles get power (LEDs go on) but don't pair.

I'd put priority low on this but couldn't change the priority field during bug-entry

This patch does all the UI work needed to add a very nice folder chooser. It saves and loads the search directories from /.rockbox/database.txt.

This is only the UI change, someone else needs to figure out how to make it actually work.

The system changes to searching the entire tree below folders (so no more ignoring some folders and then looking for uningored folders.

this also uses a half done patch to make lists handle indenting, not done for the skin list but if this is actually wanted that can be easily added

Update to my tools/talkclips.py script. Minor updates which include:
- Better handling of logfile eg. we don't leave it open as was the case
before
- Report a few more details in the log eg. start/end time, duration, and
number of talk clips created. This is useful to dettect how many files
had problems…
- Summarise output for user at end, of processing, number of talkclips
created and how long this took (in seconds).
- Report to user how many talk clips will need to be created to give
them an indication of potential waiting time etc. This is calculated by
first determining how many files are on the device excluding .talk files, and how many .talk
files there are, and calculating the difference.
- This information allows a percentage indication to be drawn throughout
the script, so now the user can track the percentage as processing takes
place.

Patch is attached.

Thanks.

The rockbox behaviour when plugging in a firewire cable is to automatically reboot into disk-mode, preventing charging whilst running rockbox.

r30804
The rockbox (r30804) Can't play ape files with CUEsheet (APE + CUE files).

Hello, all
There's a problem with viewing files in some circumstances in iPod 5.5G last 3.9 release.

When I:
playing something in /Music/Artist/Track.flac,
pause playback,
connect USB cable.
rename /Music/Artist to /Music/ArtistSOMETHING, then disconnect USB cable

I just cannot turn playback on ("~Do not exist" or something message appears, it's OK, I know),
BUT
when I trying to enter in "Files" menu - there's no reaction at all. Just nothing. I can't play of any other existing track or change to any directory without restarting device, or:

just go to Playlists → VIew catalog → select some playlist, then some music appears. But it's too long imho.

Is "it" bug or not?.. :)

Thanks,
sorry for my english,

What the title says.
At whatever sample rate I use (24k & 48k tested), each sample is duplicated.

in svn settings_apply() is called whenever a config is loaded (after boot) regardless of what is in the file. even an empty one will cause a full settings_apply() (which is slow, causes disk access and will stop music thanks to the buflib users).

This patch will apply settings individually if they have a callback registered, and if no settings without a callback are applied it doesnt bother calling settings_apply().

m4a Songs skip in middle of playback, to next song.
always at same point. fast forwarding beyond this point is fine.
files work fine on other devices/PC.
reverted back to v3.6 and all such problems are gone

When connected to PC.
While transferring files from PC to Sansa e280v2.
Both source and destination folders are open.
Sansa shuts off after some time. while transfer is still happening.
this does not happen with original firmware.

With r30907 (and also back to at least r30809 which I tested as well) I experience unneeded mass storage accesses on my iPod nano2G. I do not see this effect on my iPod Video.

Use case:
- Create a playlist from either DB or file browser
- Let buffering finish
- Skip forward track by track
(I use mpc/mp3/aac with embedded album art.)

Effect seen: For some skips I see short flash accesses (much shorter than full rebuffering).

This only happens if dircache is off. With activated dircache this effect is gone.

As such mass storage accesses are severely impacting the battery runtime on HDD targets I hope we get this figured out before v3.10.

Since r30937, the e200v2 bootloader is too large and mkamsboot errors with:

[ERR] Packed data (120926 bytes) doesn't fit in the firmware (120860 bytes)

Steps to reproduce:
1. build e200v2 bootloader
2. cd to rbutil/mkamsboot
3. run make to create the mkamsboot utility
4. run mkamsboot <path-to-e200pa.bin> <path-to-bootloader-e200v2.sansa> <path-to-output.bin>

This uses the same code as FS#12330 but uses it for the random folder advance config plugin instead.

I've nuked the entire plugin so not everything is reimplemented yet but it currently works.

Two problems:
1) it uses the \t code in the lists which isnt great (indented lines which try to scroll don't quite work and it is not implemented for the skinned list yet)
2) It cant be used to select a whole sub tree, so if you have thousands of folders it will be very tedious to select them all.

r31037 and later causes the device and sim to crash when resuming playback after leaving FM Radio. This crash has been reproduced on both e200v1 device and w32 sim and the e200v2 w32 sim. The failure is less likely to happen when there is a small number of files on the device/sim. (I have approximately 2200 files on the device and 5400 on the sim).

Tested with r30145

Steps to reproduce:
1. load the attached fms file (needs 35-Nimbus.fnt)
2. load an fm preset file - be sure to have station art
3. enter fm radio and select a preset station be sure art is displayed
4. power off device or sim
5. power on device or sim
6. start a playlist
7. stop playback
8. power off device or sim
9. power on device or sim
10. enter radio
11. exit radio
12. select resume playback
13. device or sim crashes

The e200v1 crash is:
Data abort
at 000095F0 (0)

ROLO is broken on Nano 2G 3.10RC. It just says: Executng… and freezes. Seems to be happening not only for me:

http://www.rockbox.org/mail/archive//rockbox-archive-2011-11/0070.shtml http://www.rockbox.org/irc/log-20111105#23:01:01 (is this also related?) http://forums.rockbox.org/index.php?topic=28467.0

I have RockBox version 3.9 on my Sansa Fuze v2 and so far I love it, but I have one problem. On a few tracks in my library, when I play them, the first few minutes of the song will be strangely distorted. Most of them are songs where the music starts off in just one of the speakers before moving into the other one. There will be bursts of loud, crackly noise in the other speaker during these first few seconds (that seem to be in time with the music) and then it will fix itself and the rest of the song will play perfectly. When I boot the default Sandisk firmware the songs play perfect like they should, it is only in RockBox that this glitch happens. I’ve messed with the settings a bit and even reset them completely, but nothing has worked thus far.

Attached is one of the songs that this happens with, from about 2 seconds in to about 7 seconds in. Any help would be greatly appreciated. I really want to enjoy my music without that crap in it.

To reproduce, ensure car adapter mode is enabled, start playback, and leave the now playing screen. If the charger isn't connected, connect it now. Then, disconnect the charger, causing a car adapter mode pause. Some parts of the now playing screen will overwrite the current screen. I see this in file view, main menu and settings. The main menu is quickly redrawn and back to normal, but the file view is only redrawn after I do something. Now, reconnect the charger, which causes a car adapter mode unpause after a short delay. The same thing happens.

I've seen this on:
- 5G iPod using Firewire power, running 3.10RC and r31106
- Archos Recorder V2 using charger, running 3.10RC and r31106

Edit: The same thing happens with headphone plug-in unpause (but not headphone unplug pause). I expect the problem also happens when using BUTTON_MULTIMEDIA_PLAYPAUSE, but I did not test that.

The problem is due to the pause_action() and unpause_action() calls in apps/misc.c. The second parameter is "bool updatewps". It is true in all cases except headphone unplug pause. I don't know why it's false in that particular case.

The second parameter probably shouldn't be there. The WPS should simply update itself if it is currently displayed.

This patch adds a new codec that playbacks ZX Spectrum .tap files. Created against trunk (revision 31187)

I’ve seen this bug on 3.9.1 and 3.10 on Sansa Fuze. If I set the language to Russian and connect the device to USB, I see a message consisting of squares with the only word “USB” being readable. Choosing another font in the settings makes no difference.

When the language is set to English, the message reads: “USB Keypad Mode: Multimedia”. However, the size and look of the font does not depend on the font selected in the settings. This is wrong.

If there is a real need in having a special font for the USB keypad mode text (which I doubt), that font should have glyphs for all supported languages.

Tested on r31173:

Deleted tracks are still visible after the automatic database update when the player boots. These tracks vanish as soon as I add some files. It also doesn't seem to matter if the dircache is enabled or not. Manually updating the database from the menu works as intended.

svn-r31216

when deleting a directory with several files in it the splash screen, that is appearing when deleting the individual files, gets printed over the last one without clearing the screen prior to it.

in version 3.10 chessbox plugin doesn't recognize .pgn files in the file menu and so cannot be used as a .pgn reader anymore.

Hello,

i think rockbox is very nice. I use ist for several years.

Now i found a bug:
The Car Adapter Mode or rather the power-off does not work in the Radio-Mode.
I tested it with the versions 3.4 and 3.10.

Hardware: iriver H140, iriver H340, Sansa Clip+

Rockbox version: 3.10 downloaded from http://www.rockbox.org/download/byhand.cgi I have also reproduced bug on official firmwares as old as 3.5.1, and on my own builds.

Settings: 100% default except for enabling EQ and setting an EQ i.e. using graphical EQ to set LS -0.5 at 60Hz or LS +1.5 at 60Hz

Expected behaviour: music track, however loaded, starts in normal way, with no sounds other than those decoded from file. Restarting the track results in the same normal playback.

Actual behaviour: music track starts with an obvious and intrusive click. This happens whether the track is loaded individually, or if it is the first track of an album loaded via .m3u playlist. When using playlist subsequent tracks play normally, without a click. But restarting any track causes the click.

It makes no difference if the EQ Low Shelf Filter settings are a big change from flat, or a tiny difference. To induce the bug it’s enough that EQ is enabled and LS is not set to be flat i.e. just an increment of +/- 0.5 dB is enough, and changing the cut off frequency or the Q factor made no difference.

This bug is noticeable with any track that starts quietly, and especially with tracks from CDs that are not mastered to modern high levels.

The Clip does tend to make its own small click on manual track changes and some button presses; I am not confusing this with the bug I describe. On the irivers I get a single click, while on the Clip I get a very unmusical double click.

I’ve attached my H140 config to illustrate that the config is unremarkable and that apart from the EQ it is at default. If anyone needs me to try stuff or make any changes or try a patch that is fine, but I would prefer it to be on an iriver because the Sansa OF database refresh is so annoying.

If Rockbox is connected via USB with no sd card inserted and it is inserted, it offers the OS to mount the new drive.
If the sd card is removed and reinsterted again, it fails to offer and recognize it.

I could locate the problem in firmware/usbstack/usb_storage.c in the line

if(inserted && check_disk_present(IF_MD(volume))) {

after reinserting the card, check_disk_present fails to return true, so this check fails and the card isn't recognized anymore.

The setting works similar to the autoresume dirs: Directories are seperated
by colon, e.g. "/Music:/Podcasts". Default is "/sdcard" on android, "/" on
all other targets.

A maximum of 8 dirs can be selected, the setting cannot be longer than 80 chars.

Note: There's one problem. If you specifiy "/Music:/" (or any folder and one if its parents afterwards), then /Music is scanned twice. It's tricky to fix, and I'm not sure if it's worth it. This does not happen for "/:/Music" as it can be detected more easily in this order (and this is already implemented).

Sansa Clip v1. Stable version 3.10 [Tracker didn’t let me choose it?]
After playing the item for some time [varies] Rockbox crash and give this error:
Data abort
at 3001913E
FSR 0×8 (domain 0, fault 8)
address 0x7261702D

Using DFKT Minimum Clip theme.

When using an image in a theme it shows ugly gradients/dithering, as if it was only 16 bit. When the same image however is used as backdrop (%X tag, instead of ‘regular’ %xl and %xd), it looks smooth and 24 bit.

Attached image shows the issue. Top half shows what Rockbox does when the image is loaded via %xl and %xd. Bottom half shows how the image should look like (and how it does indeed look when it’s used as a %X backdrop).

Tested on a Cowon D2 simulator and on an Android device running RaaA.

The .ape file I join make rockbox produce a horrible noise (like random audio) when seeking inside it. The original file was very large, so I created this one with:
dd if=original.ape of=test.ape bs=512 count=1000
So the produced file may not be correct, but it plays correctly in rockbox, and reproduces the bug, so I join it…

build: r31372-111219

i am using SYLT and USLT tags in my audio files (LYRICS and UNSYNCED LYRICS respectively)

but it seems like lrcplayer does not read the SYLT tag.
it only displays someting if the UNSYNCED LYRICS tag is present

Hi all!
After 3.10 update I usually get my player frozen with usb plug icon if I connect it to any USB host while the player is off.
Steps to reproduce the issue:
1. Power off the iPod.
2. Plug it to Usb host. (tested with mac and Android)
3. Wait the system to boot.
4. It freezes with usb connect icon (no menu bar). Only holding Menu+Select help.

Thanks. Great firmware!

This patch adds a %ch tag that returns the number of channels in the current file.

Unfortunately, the large majority of codecs don't fill in this field in struct mp3entry. In the codecs covered by the rockbox testfiles collection, only atrac, cook and tta actually work.

I don't think it makes much sense to commit this with so few supported codecs, so help is appreciated on the codec side of things

2. Installation
Installing Rockbox is generally a quick and easy procedure. However before beginning
there are a few important things to know.
2.1. Before Starting
Supported hardware versions. The Clip v2 is available in multiple versions…

this should read :”The Clip is available in multiple versions…”