Rockbox

Hello!
Not very long ago I got iPod Nano 2 gen 8gb, installed rockbox and encountered this strange behavior:

After pushing and releasing Hold button player doesn't react on wheel. When I'm trying to use some other button(Menu, for example), nothing happens. After third attempt to use a button Rockbox does button context properly, showing me what I wanted to see a few clicks ago. What happens with interface after using Hold? When I return to 'Now playing' screen throughout Menu, all works fine. But right after using Hold button I can't nor increase/decrease volume, neither move in a menu list.

There are some problems with the quickscreen on the Sansa Fuze. I traced it back to r31246, a text alignment bugfix:

- Quickscreen items flicker a lot and sometimes vanish for half a second on each change of an option.

- Setting the right option (Repeat) to "Shuffle" and then back to something else causes "Shuffle" to stick on screen. Leaving the quickscreen and returning to it reveals the correct setting.

This only happens for longer scrolling strings of text, e.g. "Shuffle" is "Zufallswiedergabe" in German.

When turning on my Sansa with Rockbox 3.10, the display sometimes goes all white and stays that way until the screensaver kicks in. The player works fine during that time and can be controlled blindly. After the screen turns off and I turn it on again, the screen works as expected. This does not happen all the time, but very often.

Using the %pL Tag (in WPS) in order to simply display it or use it in a conditional tag (like in the “analog” theme yields very high values (let call it spikes) - where they should not be, while the bar-type peak meter is working fine.

Within the simulator, everithing is running smooth, as far as I could see.

I tried to have a look at the sources but that’s too much at the moment.

Does somebody have a clue ?

Regards

  Ralf

When you configure Shortcuts to replace the Quick Screen then there is this unwanted behaviour:
Exiting the Shortcuts menu always returns to the Main Menu, not to the screen from which the Shortcuts menu was invoked by pressing the Quick Screen key combination.

Tested on: Sansa Clip+
Builds tested: latest daily - b7bc240-120409

			latest current -	2406005-120410

In Rockbox for Android it is not possible to highlight an entry in a list without selecting (entering) it.

For example, if I am in the playlist viewer showing the list of just playing songs with my ipod (running rockbox) I was able to scroll through the list which moved the higligting bar through the list and then I could select the desired entry by pressing enter. With the touchscreen I found no way only to highlight a certain entry.

This is important if all entries are very long and have the same starting text. For example "Ludwig von Beethoven, Symphony No. 9 - 1. Adagio" cannot be distinguished from "Ludwig von Beethoven, Symphony No. 9 - 2. Andante" in the playlist viewer since the distinguishing part is cut off. With my ipod I could highlight the entries with the scroll wheel and the highlighted line started horizontally scrolling so I could see the complete text. With the Android port I can only touch the line, but touching the line does not only highlight it but also selects it and so starts playing.

This problem also exists in other list with long entries and happens with all version I compiled until now (latest was a12b2a5).

The settings submenu with the playlist viewer settings like “show icons”, “show indices” and “track display” to select between file name only and full path for playlist entries is not available in the playlist viewer menu in the Android version.

So these settings cannot be changed.

This happens in all version I tried until now (latest was a12b2a5).

I'm running Rockbox 3.11.2 on a Sansa Clip+.
I followed these steps:
- go to the Main Menu
- Files
- long press on <microSD1>
- Playlist Catalogue
- Add to New Playlist
I tried to save the playlist with a long press of the select button (not sure of the button's actual name; it is the button in the middle of the 4-way controller and the one that is usually used to select the highlighted option). I was returned to the Files menu. The playlist did not get saved, and there was no error explaining why.

As a result, I spent a long time assuming that long press of select was a "cancel" action, and tried short and long presses of every other button trying to save the playlist.

Workaround: instead of accepting the suggested filename, remove the "<" and ">" characters from the auto-entered filename ("/Playlists/<microSD1>.m3u8") to be able to save the playlist.

Suggested fixes: The filename suggested by Rockbox should not include "<", ">", or other un-saveable characters. In addition, if the user tries to save a file with invalid characters, a warning or error message should be posted (like the "Cancelled" message that briefly pops up when the power button is pressed to exit from the set-filename screen).

As the title suggests, fun things like: https://plus.google.com/102855057878446061693/posts/FkQ4wQZb8VD can happen in this instance.

Initially reported here: http://www.rockbox.org/irc/log-20130113#07:14:49

[Saint]

Key lock (activated by pressing Power in the WPS) deactivates when music playback stops (end of playlist). The keypad then becomes active again. It shouldn’t get activated until Power is pressed again.

I would like to leave my player charging overnight and have it resume playback in the morning to wake me.

My player remains on when charging and cannot be turned off.

The alarm does not resume playing if the player is already on when the alarm time passes.

I suspect this probably applies to all players, mine is a Sandisk Sansa Clip+.

Rockbox info says v. 3.13 - the stable build grabbed by RockboxUtility, which this bugtracker doesn’t seem to know about yet.

I’m using the latest Dev build for the Fuze+. SanDisk Sansa Fuze+ 5ef1e2d. Same issues experienced in v3.12 stable.

The screen, for lack of a better term, jumps when navigating in upside-down mode.

http://youtu.be/dRfiBtMx2to

Rockbox version 3.13
Wenn I delete a file being played, it continues to play (which is OK for me). But when I rewind in this file while playing, Rockbox hangs and does not respond to any key presses. The screen light stays on. I have to press the hard reset or wait until the battery is empty.

This also sometimes happens when I press fastforward, but it always happens when pressing rewind.

Desired behavior:
- Preferred: permit rewinding/fastforwarding (and really delete the file only after stopping the replay)
- ignore rewind/fast forward; alternatively
- skip to the next file immediately after deleting.

Thanks for reading, and please contact me if you cannot reproduce this! I have a Iriver H140 and I must say that all my recordings are in wavpack (recordings made using SPDIF-IN), so I do not know whether this also happens with other file formats and with other players.

-Stefan

Revision a8758c9 and Stable (3.13)

If you use the Hold Switch to Lock Keys and remove it again to unlock, buttons doesn't work.
Move around with finger at touchpad work. After this bottons work without problems.

Short:
Start Rockbox
Move the curser over Settings (Example)
Move Hold switch to Lock
Move Hold switch to Unlock
Press Middle Button (Doesnt work)
Move around on Touchpad
Press Middle Button (work)

Rockbox doesn't speak in the FM mode with voice configured. I tried it in my local language (spanish) and in english with same results. Apparently it is not a problem of the translation, because sometimes (only 2 or 3 times in at about one year that I'm using the player) the player speak some words. This works correctly in release version.
My actual version is 0f89b04, but it happend in all dev versions.

On my X3, it triggers the MIPS equivalent of a segfault. (directory has 792 entries, tried to access it with only 500 allowed)

Rather than crashing outright, I think it would be better to detect this and somehow error out gracefully?

The following set of WPS tags demonstrates:

# WPS Document
%wd
%V(0,0,-,10,2)%Vb(000000)%Vf(FFF000)
%aL%cH:%cM %ac%pv %aR%bt
%V(0,11,-,30,2)%Vb(000000)%Vf(FFF000)
%it

If you alternately insert and remove a space between the second occurence of %Vb/%Vf, the track title text appears and disappears. It appears to happen in a few other variations, but this is the shortest concrete example.

Whenever screendump is enabled,It gets a panic error.
Error Message:
*PANIC*
Stkov usb
pc:080739ac sp:080f5458

Right now if the voice file fails to load, there’s a splash message but blind users won’t be able to see it.

(usually this happens because they upgraded rockbox without upgrading the voice file too)

It would be useful if we could embed a failsafe voice file, containing only that one prompt, so the user will know what is going on.

Just English for now, though ideally one for every language we support.

(Oh, and a pony too. Please?)