Rockbox

When playing music sometimes crackling sound exist but after 5-6 secs playing it dissappear
i tried to update until the last rockbox firmware (ver.b045e4d date 2016-11-01) the problem still there

but if i boot to mango (stock fw) no crackling sound remains

Device : Ibasso DX90

Voicing of menus will work fine on the default font. However, if 08-Namil is used, the voicing dies upon reboot.

See also http://forums.rockbox.org/index.php/topic,51408.0.html .

Creative ZEN device build 8fec364f6-170125

Steps:

1 Clear Running Time
2 Shutdown, to ensure Running Time clear takes effect
3 Launch Rockbox
4 Record wall clock time
5 Leave running for a few hours
6 View Running Time and compare with elapsed time on wall clock

Expected: Running Time equal to elapsed time
Observed: Running Time less than elapsed time by 2%

Note: battery_bench.txt times accord with elapsed time.

I downloaded this: https://www.youtube.com/watch?v=Lrb0dHKJBR4 using the youtube-dl python program. The file plays and seeks correctly in foobar2000 and MPC-HC. But, on my clip+, whether I seek 10 seconds or 10 minutes into the file, it ends up playing a position of the file previous to the one displayed. For example, if I seek 50 seconds forward from the beginning, it will play the file from the start, while the screen still displays as if it's playing from 50 seconds onwards. Seeking to the end of the file will have it play a section from about 2 minutes earlier than it should be, while the time display and music will continue until 1:14:20, with the file actually being 1:12:46.

I did not hear the files being played slower than they should be, so it seems it's only an issue when seeking.

I've confirmed this happens on every AAC file downloaded by youtube-dl, and that re-encoding the same file to AAC using NERO encoder makes the problem dissapear.

Today I've experience something which IMO should not happen.

I recorded vian the built in micro on my Sansa e200 v1, paused the recording (not stopped!). In this state, I plugged USB cable. After that, there was the following text in the system font on the display, and the player did not respond to any keys. It had to be restarted via very long pressing at On/Off.

The text is:

*PANIC*

usb_storage_init_connection
(): 00M
pc:0006B878 sp:000D3538

  A: 00069978
  A: 00069F80
  A: 0005326C

bt end

I've reproduced this three time in a row.

I have the official version 3.14 installed.

After upgrading from 3.13 to 3.14, when playing most of the ogg vorbis files in my library, a "beeping" sound sporadically occurs.

The sound is random (2 consecutive playbacks of the same track will beep on the same time).

All the files played fine with 3.13.
MP3 files play just fine (I have not tested other formats yet).

Possibly interesting facts :
Vorbis files with a lower bitrate (<100kpbs) seem to be less subject to this beep.
It seems beep never occurs when screen is on.

Dear Rockbox, long story short after doing update to the latest daily build c6d5cd7(2017-09-11), after playing music for around 30-40 minutes the screen start to freeze cannot scroll or select anything on the screen even turn it off is not possible but after few seconds it turn off by itself and can be turn on normally after that.

Daily build c6d5cd7-170907

An idle power off can occur in recording mode. When it does, data loss occurs. This has already bitten me a few times.

Steps to reproduce (on battery, not charging):
1. Execute Settings > Manage Settings > Reset Settings
2. Set Settings > General Settings > Startup/Shutdown > Idle Poweroff to 1 minute
3. Reboot
4. Go to Recording mode
5. Note current Volume and Gain settings and then change them to something else and note the new settings. Don't start a recording; just leave it in “stop” mode (*not* record or record-pause).
6. Wait for automatic power off
7. Power back on and check recorder settings

Expected: Settings are what they were after being changed.
Actual: Settings reverted to what they were on boot.

This can cause the loss of entire recordings, too:

8. Go back to Recording mode.
9. Wait until just before Rockbox would power off, then start a recording (if the display goes to sleep, it comes back on a bit before powering off; start the recording as soon as it comes back on).

Expected: Recording is done as usual
Actual: Rockbox powers off anyway, without warning, less than a minute into the recording. The recording is lost (or if the file is there, it's unplayable; maybe this depends on the recording format used).

Rockbox starts with remote, but doesn't respond to button presses except turning backlight on with build 6039eb05b-180313.
It works with deaeb73-161114 though.

Click on the music file and die

I have an iPod 4G Grayscale (model A1059) running Rockbox 3.14 with an Apple FM remote (model A1187). The remote part works ok (Play/Select and Fwd/Rev buttons work - volume control is separate due to it being connected to the line out, but works).

However, the radio menu does not show up in the main menu when connected. Not when I boot with the remote connected, not when I connect it after booting, and not if I go to a different menu and then back.

In the debugging menu, it simply says that the FM tuner hardware is not found.

I am sure that this used to work at some point. Are there known regressions?

Please refer to forum post for full exchange: http://forums.rockbox.org/index.php/topic,52518.0.html

In summary playing ALAC will crash the unit, other codecs not as much. My reasoning is (as contained in the forum post):

Converting some of my ALAC collection to FLAC to test has given excellent results = no crashes. I am suspicious of the ALAC decoder; watching the VIEW BUFFERING THREAD there seems to be consistency:

OGG/MP3/FLAC/WAV: CPU Frequency goes up to 124 until pcm: becomes full, then drops to 45mhz and pcm: hovers (it is always active) near the top of 100%. Upon track change the cycle starts again (124mhz until pcm: becomes full). I don't seem to get crashes.

ALAC: CPU Frequency goes up to 124 until pcm: becomes full, then drops to 45mhz and pcm: quickly goes down (takes about 2 seconds) to 75%, then cpu switches to 124mhz to get pcm: back up to 100%. This goes on constantly (cpu high - low cycle) while a single track/file is playing. I am now believing this cpu going up and down constantly gives me the crashes. Note on crashes: I don't know when they will happen, sometimes after a minute or two, sometime after 10 minutes , there is no pattern I can tell.

The volume settings are bypassed and is at max volume when the plugin is started. Even when putting it at -60DB it still has sound. After exiting and relaunching the app,the volume is maxed again,regardless of volume settings.

Reported Version: 3.15 not 3.14

Hello,

I am using a "SanDisk Sansa Clip+" and it seems that currently it is not possible to remove quickscreen entries when they are set, you can only overwrite them.

In the manual chapter "3.15 Quick Screen" has to be adapted, once this function has been implemented.

It would be very nice to have this possibility!

-Ramon

Hello there,

When I reboot my Rockboxed iPod nano second generation, it changes the time +5 hours.

Does anyone know why this can be? Thanks

Right now if the voice file fails to load, there’s a splash message but blind users won’t be able to see it.

(usually this happens because they upgraded rockbox without upgrading the voice file too)

It would be useful if we could embed a failsafe voice file, containing only that one prompt, so the user will know what is going on.

Just English for now, though ideally one for every language we support.

(Oh, and a pony too. Please?)

Playing 320K MP3s pauses often in Version 3.15 and daily build 7d00533 also UI becomes unresponsive
Version 3.14 or older does not reproduce the issue in either 44 or 48khz sampling rate and same sound options
Is not reproducible under OF or Version 3.15 running on IPOD 6G
seems to be a cpu usage issue as compiling a version of rockbox with much higher than stock CPU clocks seems to alleviate the issue to an extent but there is still occasional pauses that is not present after reverting to 3.14 and stock 80 mhz clock speed.

On my X3, it triggers the MIPS equivalent of a segfault. (directory has 792 entries, tried to access it with only 500 allowed)

Rather than crashing outright, I think it would be better to detect this and somehow error out gracefully?

Rockbox’s file viewer has a global sort setting.

It would be nice to have a default global sort setting, but also persistent per-directory sort settings.

For my use-case, it makes sense for me to sort my podcast directory by date, but I wouldn’t want that to affect my music directories, which should play files sorted by name.
Whenever I wish to play music, I need to go back to the general settings, and change the sort settings. And when I’m done and wish to listen to podcasts, I have to change it again.