Rockbox

All settings should be listed there (even more so settings which cannot be set through the UI), but root menu order is only described in advanced_topic/main.tex as of now.

The 2bit greyscale LCD drivers ignore the current viewport’s drawmode. This makes you unable to draw icons with a non-clear background.

Duplicate table and some text found in manual/main_menu/main.tex in section Recent Bookmarks, and in manual/configure_rockbox/bookbarking.tex in section Bookmarking.

These duplicate code sections should be joined, and the two files should share it.

This patch enables changing the fractal's colors.

Currently, not all targets have proper keymaps defined. This is a work in progress.

I would appreciate any comments.

When connected to PC.
While transferring files from PC to Sansa e280v2.
Both source and destination folders are open.
Sansa shuts off after some time. while transfer is still happening.
this does not happen with original firmware.

Daily build c6d5cd7-170907

An idle power off can occur in recording mode. When it does, data loss occurs. This has already bitten me a few times.

Steps to reproduce (on battery, not charging):
1. Execute Settings > Manage Settings > Reset Settings
2. Set Settings > General Settings > Startup/Shutdown > Idle Poweroff to 1 minute
3. Reboot
4. Go to Recording mode
5. Note current Volume and Gain settings and then change them to something else and note the new settings. Don't start a recording; just leave it in “stop” mode (*not* record or record-pause).
6. Wait for automatic power off
7. Power back on and check recorder settings

Expected: Settings are what they were after being changed.
Actual: Settings reverted to what they were on boot.

This can cause the loss of entire recordings, too:

8. Go back to Recording mode.
9. Wait until just before Rockbox would power off, then start a recording (if the display goes to sleep, it comes back on a bit before powering off; start the recording as soon as it comes back on).

Expected: Recording is done as usual
Actual: Rockbox powers off anyway, without warning, less than a minute into the recording. The recording is lost (or if the file is there, it's unplayable; maybe this depends on the recording format used).

I would like to leave my player charging overnight and have it resume playback in the morning to wake me.

My player remains on when charging and cannot be turned off.

The alarm does not resume playing if the player is already on when the alarm time passes.

I suspect this probably applies to all players, mine is a Sandisk Sansa Clip+.

Rockbox info says v. 3.13 - the stable build grabbed by RockboxUtility, which this bugtracker doesn’t seem to know about yet.

The attached patch fixes a minor compiler warning on 64 bit platforms.

When you configure Shortcuts to replace the Quick Screen then there is this unwanted behaviour:
Exiting the Shortcuts menu always returns to the Main Menu, not to the screen from which the Shortcuts menu was invoked by pressing the Quick Screen key combination.

Tested on: Sansa Clip+
Builds tested: latest daily - b7bc240-120409

			latest current -	2406005-120410

The Clip Zip's text viewer does not bookmark anymore. When holding down the Submenu and Select keys (which according to the manual sets a bookmark), no bookmark is created, and the screen flashes between the context menu and the text file instead. This bug has been confirmed by skip252 here: [ http://anythingbutipod.com/forum/showthread.php?p=629493&posted=1#post629493 ].

Rockbox build is the latest dev build at the time of filing [62de15f-130103].

When playing a sequence of two songs Rockbox on my HTC Desire S always crashes. I first had r30576-110921, and now it is r31516-120102. Cropped versions of the songs can be downloaded here:

http://www.vlado-do.de/rockbox/01_Wenn_die_Nacht_am_tiefsten_03m_08s_09h__03m_23s_22h.ogg http://www.vlado-do.de/rockbox/02_Wir_m%C3%BCssen_hier_raus_00m_00s__00m_28s_82h.ogg

They still reproducably crash my Rockbox. I found a workaround, though: mp3 versions of the same songs play all right. Rockbox for me still is the only known way to have gapless playback on my phone. Thanks for that guys!

Buy the way: the same ogg files made no problem in Rockbox on my old iPod nano.

This is a rockbox version of the simple word game called “Target”.
Rules: (stolen from The Age newspaper website)
“See how many words of four letters or more can you make from the letters shown in the grids.
In making a word, each letter must be used once only.
The word must contain the centre letter and there must be at least one nine-letter word in the list.
No plurals or verb forms ending with “s”; no words with initial capitals and no words with a hyphen or apostrophe are permitted. The first word of a phrase is permitted (eg inkjet in inkjet printer).”

Currently it only works on H300, iPod Photo and iPod 5g DAPs, but I plan to expand this to all bitmap targets soon enough.
The games are either user selected or loaded from the file target_wordlist.dat, I’ve included 10 puzzles, but there are heaps more on The Age newpaper’s site (www.theage.com.au).

This font is part of the WenQuanYi Project at [1]. It’s in Chinese, but there’s an english page at [2].

I’m adding this font because:
1. Currently there is no good Chinese font for Rockbox.
2. The best Chinese font (unifont) has unevenly sized Chinese characters, while this font has uniformly sized Chinese characters.

The attachments contain screenshots of the simulator, to show how this font would look like on the iPod Nano. I’ve also attached a screenshot using the Unifont font to show the uneven sizes of Chinese characters, for comparison. I don’t know about other languages, but I’d think other CJK languages work better in this font as well, due to the merging of WenQuanYi Bitmap Song.

According to the project[3], this font is made by combining the GNU Unifont (GPL), WenQuanYi Bitmap Song (GPL) and Fixed-16×8 (Public Domain) fonts. The maintainer of GNU Unifont also acknowledges this fact at [4].

This font is licensed under the GPLv2 with a font embedding exception[3]:

[quote]
** GPL v2 license with font embedding exception:

As a special exception, if you create a document which uses this
font, and embed this font or unaltered portions of this font into
the document, this font does not by itself cause the resulting
document to be covered by the GNU General Public License. This
exception does not however invalidate any other reasons why the
document might be covered by the GNU General Public License. If you
modify this font, you may extend this exception to your version of
the font, but you are not obligated to do so. If you do not wish to
do so, delete this exception statement from your version.
[/quote]

I don’t mind either way, but it would be up to Rockbox developers whether to strip off this exception. And either way, the font is compatible with Rockbox’s license (GPLv2).

The font I’m attaching is a modified version (and only the bdf); you can download the original version from [5]. My modification is:

— wqy-unibit.bdf.orig 2008-06-01 04:47:36.839752214 +0800
+++ wqy-unibit.bdf 2008-06-01 05:01:51.031748178 +0800
@@ -64,7 +64,7 @@
CHARSET_ENCODING “-1” CHARSET_COLLECTIONS “ASCII ISO8859-5 GB2312.1980 BIG5-0 KSC5601.1989-0 JISX0208.1997 ISO10646-1” ENDPROPERTIES
-CHARS 46443
+CHARS 46444
STARTCHAR uni0000
ENCODING 0
SWIDTH 500 0

This is because convbdf will emit a warning “Warning: DWIDTH spec > max FONTBOUNDINGBOX” when converting the font. This is because there are actually 46444 STARTCHAR entries, but only 46443 glyphs – the character “mu” is encoded as 181 and 956, with the exact same glyph. The generated .fnt file is exactly the same with or without my modification.

Additionally, this font is quite big so it’s a bit big on the screen of the iPod Nano. But it would be great on larger screens. Please take a look at the screenshots in the attachments.

Links:
[1] http://www.wenq.org/ [2] http://wqy.sourceforge.net/cgi-bin/enindex.cgi [3] http://www.wenq.org/index.cgi?Unibit_README [4] http://www.unifoundry.com/unifont.html [5] http://downloads.sourceforge.net/wqy/wqy-unibit-bdf-1.1.0-1.tar.gz?use_mirror=osdn

This font is part of the WenQuanYi Project at [1]. It’s in Chinese, but there’s an english page at [2]. This font is similar to the WenQuanYi Unibit font (FS#9059) and focuses mostly on ASCII and CJK, but I’m also posting this font for inclusion because this one has different point sizes, like for example the nimbus, Sazanami and ProFont fonts already included in Rockbox. With the different point sizes, especially lower point sizes, this font is great for small screens such as my iPod Nano.

I’m attaching some screenshots of this font under various point sizes and weights. I’ve also taken screenshots with the simulator to show how it would look like in Rockbox.

Additionally, this font is available from the original website at [3]. There is also an online README file at [4]. The source BDF files are available from the project’s SourceForge page at [5], and the BDF files I’m attaching come from the source package at [6].

According to the project[4], this font is a derivation of older free fonts and enhanced with bitmaps made by online users. As such, it is licensed under the GPLv2 with a font embedding exception[4]:

[quote]
** GPL v2 license with font embedding exception:

As a special exception, if you create a document which uses this
font, and embed this font or unaltered portions of this font into
the document, this font does not by itself cause the resulting
document to be covered by the GNU General Public License. This
exception does not however invalidate any other reasons why the
document might be covered by the GNU General Public License. If you
modify this font, you may extend this exception to your version of
the font, but you are not obligated to do so. If you do not wish to
do so, delete this exception statement from your version.
[/quote]

It’s up to Rockbox developers whether to strip off this exception. Either way, the font is compatible with Rockbox’s license (GPLv2).

Links:
[1] http://www.wenq.org/ [2] http://wqy.sourceforge.net/cgi-bin/enindex.cgi [3] http://www.wenq.org/index.cgi?BitmapSong [4] http://www.wenq.org/index.cgi?Hero_README [5] http://sourceforge.net/projects/wqy/ [6] http://downloads.sourceforge.net/wqy/wqy-bitmapfont-bdf-gb18030-0.9.9-0.tar.gz?modtime=1194227675&big_mirror=0

The key lock feature on my clip+ can be circumvented. Select the last title in a directory using the file browser. Then activate the software hold. When the song finishes the Player skips to the file browser and the key lock is turned off after a button press. You can navigate around the menus until you return to the playing screen, then the key lock turns on again.

SVN r30720

svn-r31216

when deleting a directory with several files in it the splash screen, that is appearing when deleting the individual files, gets printed over the last one without clearing the screen prior to it.

Previous song and Fast Backward are unable to work

Click on the music file and die

For 15-Adobe-Helvetica.bdf:

STARTCHAR ETHIOPIC SYLLABLE NO
ENCODING 4758
SWIDTH 1520 0
DWIDTH 19 0

The above value of SWIDTH, DWIDTH is too larger than that of other Ethiopian characters (This character protrudes from bounding box).

I send this bug’s patch.