This patch changes the iriver H300 series bootloader's power and usb handling. When a USB or Power plug are inserted into the H300, it will now boot as normal, not stop in the bootloader usb/charging modes. This was mainly for use in my car, but is also helpful for people with charging cradles for their computers.

Forum thread can be found here http://forums.rockbox.org/index.php?topic=17202.0

I was reading http://forums.rockbox.org/index.php?topic=17079.0 and thought I’d take a swing at it. So far, I have added (potentially shaky?) support for the ‘#’ comments in the file posted, allowing both Windows and Linux line ending formats, and longer filename support.
Still having problems with the white space after each entry, and detecting or assuming the presence of the file extension.

The patch fix the multiple-language feature, maintaining the same behaviour in interactive and batch mode and with “make reconf”. Now it’s possible to build more than one voice language at once, specifying different engine and option set for each one.
So, running “make voice”, all the selected languages will be built.

To help the comprehension, here it is a batch mode sample:

../tools/configure –target=ipodvideo –ram=64 –type=av –language=italiano,espanol –tts=f,e –voice=lp_diphone –ttsopts=, –encopts=’-q 10 -c 10,-q 5 -c 5’

This is like to run:

../tools/configure –target=ipodvideo –ram=64 –type=av –language=italiano –tts=f –voice=lp_diphone –ttsopts=’ ' –encopts=’-q 10 -c 10’

../tools/configure –target=ipodvideo –ram=64 –type=av –language=espanol –tts=e –voice=lp_diphone –ttsopts=’ ' –encopts=’-q 5 -c 5’

In the first case, I set the language to italian, using festival with voice lp_diphone (female), no further festival options and some manual encoder options.
In the second case, I set the language to spanish, using espeak. Even if I set the voice, the value is ignored, since the selected TTS engine doesn’t use it.

I also added some cosmetics, like some very circumstantial indentation, blank check in rootdir too, simpler numbered menu generation, some terser command pipes.

The patch is applied to r22250.

I don’t know if it’s a really wanted feature, but the word in the script hurt me!

Hi all,

Currently for all models, the Morse Code input method can only type lowercased letters. Here I provide a patch which enables people to switch between lower cased and upper cased letters, I implemented this for Fuze and Fuze v2, and further fixes will be provided soon (or someone else want to add some key mapping options into your keymaps?)

The patch (also attached):

Index: apps/action.h

   ACTION_KBD_DOWN,
   ACTION_KBD_MORSE_INPUT,
   ACTION_KBD_MORSE_SELECT,

   /* the following are helper actions for touchscreen targets,

   "abcdefghijklmnopqrstuvwxyz1234567890,.?-@ ";

                       state.morse_code |= 0x01;
               }
               break;

           case ACTION_KBD_SELECT:

                   /* turn off hangul input */
                   state.hangul = false;

               }

               break;

           int morse_code;

           outline[0] = morse_alphabets[i];

           sc->putsxy(x, y, outline);

           morse_code = morse_codes[i];

   { ACTION_KBD_DONE,         BUTTON_UP,                        BUTTON_NONE },
   { ACTION_KBD_ABORT,        BUTTON_HOME|BUTTON_REPEAT,        BUTTON_NONE },
   { ACTION_KBD_MORSE_SELECT, BUTTON_SELECT|BUTTON_REL,         BUTTON_NONE },

   LAST_ITEM_IN_LIST

This patch adds a couple more lines to Track Info for Play Count and Rating.
Currently these don’t seem to show up anywhere else.

Tested against r26427 with Fuze v2 and USim.

I am trying to use the last method mentioned on the ipodpatcher wiki page to write Rockbox directly into the OSOS image on my iPod Nano2G. Sometimes it works properly, but other times it fails saying that it couldn't read the header from the .ipodx file. I am following the instructions exactly, so that can't be an issue. I have tried hexediting the .ipodx file, and in some cases I can get ipodpatcher to read the header by editing the first four values, but this always causes a Checksum Error. Here is the exact output:

C:\Users\Michael Marley\Downloads>ipodpatcher.exe -wf rockbox.ipodx
ipodpatcher 5.0 with v4.0 bootloaders (v1.0 for 2nd Gen Nano)
(C) Dave Chapman 2006-2009
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

[INFO] Scanning disk devices… [INFO] Read XML info (4 bytes)
[INFO] Ipod found - 2nd Generation Nano ("winpod") - disk device 1
[INFO] Reading partition table from \\.\PhysicalDrive1
[INFO] Sector size is 2048 bytes
[INFO] Part Start Sector End Sector Size (MB) Type
[INFO] 0 63 48194 94.0 Empty (0x00)
[INFO] 1 48195 1982462 3777.9 W95 FAT32 (0x0b)
[INFO] Read XML info (4 bytes)
[INFO] Ipod model: 2nd Generation Nano ("winpod")
[ERR] Failed to read header from rockbox.ipodx
[ERR] –write-firmware failed.

Hacking from Antoine Cellerier’s code for solitaire.c, I put together a rough freecell game.

It currently works for Sansa E200 targets. Others should work once button mappings are done.

This is not heavily tested, so feel free to report or fix any problems you encounter.

What the title says.
At whatever sample rate I use (24k & 48k tested), each sample is duplicated.

It's Seems to be no support for RTL languages like Hebrew and Arabic in rockbox for android.
Instead of מוסיקה written הקיסומ (in English - Instead of "Music" written "cisuM).
I attach pictures for example:

On my Sansa Clip+ 4GB, with Rockbox v3.11.2

Recording a wav file through internal microphone. If the audio signal clips at the positive limit, bad things happen:
1) Most of the time the recorded signal wraps around to a full scale negative value, which makes it sound terrible.
2) Sometimes the recorded signal wraps around to a near zero value, which still makes it sound terrible but the distortion is not so loud

3) Clipping at the negative end of the range is as you would expect - a flat line which sounds like normal digital distortion, as you would expect

See attached picture of the recorded waveform showing each of the 3 situations described above.

Consider the following theme markup:

%Vl(progressbar,306,156,10,80,-)
%pb(0,0,10,80,progressbar.bmp,vertical)

That draws a vertical progress bar that will get filled from bottom to top. When a song starts to play, the progress bar is one pixel high, at the correct position (at the bottom of the viewport). That 1px-high image quickly jumps up one pixel (moves up by one pixel), then comes back down one pixel (at the correct position) whenever the progress percentage is high enough. The progress bar then displays normally and grows as the song is playing. See attached screenshots.

Expected behavior: the position of the progress bar (relative to the viewport) should not change. The bug has been observed in the iPod Classic and Clip Zip sims (builds 1bc89bd and 77bfff5) as well on the actual devices. Inverting the progress bar (with the "invert" parameter) shows the correct behavior (inverted bar with no such glitch).

Affected themes: Ash (iPod Classic), SugarBrown (Clip Zip).

Version 9e186e34ab-190820

i have an ipod 7th gen
rockbox installed
140.000 titles

database contains in unpredictable many cases of the folders 2 times the same title
not in all folders, but it happens very often that i open one and i see all titles 2x although they are only 1x on the sd card

the files exist only ONCE
but the database keeps listing them all 2 times

i rebuilt it several times, but the database keeps on doing that

any hint what i can do?

start as apple / itunes and delete rockbox folder / install new did not help

The patch reorganizes Rockboy to use the same method for storing GB frame buffer data on greyscale targets as color targets. As a result, support for greyscale iPods is much easier and has been implemented (inspired by FS #5282).

Some other changes include:
- Enable the menu for iRiver H100
- Ability to “Show Stats” on all targets
- Screen is redrawn all at once on greyscale instead of line by line
- Elimination of fb.mode (all targets use options.scaling for scaling options)
- Elimination of fb.cc on non-color targets
- Minor variable renaming
- Unification of LCD variables (vdest vs frameb)
- Move greyscale LCD code into lcd.c
- ifdef out vid_update() on greyscale and color targets

Since I don’t have an iPod, I’m curious to see how well this works. It should be fine since the patch my work is based on seems to work for people.

I really need iRiver H1X0 users to test this. There are significant changes to the LCD code and I’d like to know if the is any speed change, whether its an improvement or not. I’d guess that it’s slightly faster or the same as SVN but there’s always a chance that it is slower.

This patch adds an option to disable the speed limiting that slows down seeking as you approach the end or beginning of a track.

It defaults to limiting enabled, to maintain compatibility. Personally, I prefer the fast seeking without the limiting.

The manual is not included, I can't compile them still…

Building Rockbox fails if assert() (in firmware/include/assert.h) is used.

Then, I reworked assert.h.

changes:
When assert() failed, the correction that displayed the file name, the number of lines, and the condition of failing was done.
Moreover, when the log was enabled, the log was output to the file.

Please select the following to make assert() enabled when you make Rockbox.

1) Run tools/configure

2) Build (N)ormal, (A)dvanced, (S)imulator, (B)ootloader, …

    Select "A"

3) (D)EBUG, (L)ogf, (A)ssert, (S)imulator, (P)rofile, (V)oice

   Select "A"

4) make

This patch is a continuation of FS#9879 and includes it (but adds something more). It adds the possibility to switch the lamp on and off without leaving the plugin.

Key mappings were taken from FS#8934.

Since FM stations list may require that the FM region is set to a certain value, it would be good if the FM region could be set along with the station list. The patch does just that.

The region is set by putting the line “region:N” into the FMR file (at any line there). N can be one of the values allowed for the fm_region setting.

The patch does not work on the simulators for e200 and h120 (the only two I tried) because, for some reason, the symbol HAVE_RADIO_REGION is not defined for them. Could anybody tell why?

Saving the region along with the station list is not implemented.

As of r21894, the pitch changing mode (in the pitch screen) can only be toggled (cycled through) in one direction. However it would be handy to be able to cycle in the other direction to change procentual vs. semitone while still staying in the time stretch mode. This patch adds such a possibility.

The key mappings is only defined for H1xx and H3xx (as a long press of Mode). Please add keys for other platfroms.

Update to my tools/talkclips.py script. Minor updates which include:
- Better handling of logfile eg. we don't leave it open as was the case
before
- Report a few more details in the log eg. start/end time, duration, and
number of talk clips created. This is useful to dettect how many files
had problems…
- Summarise output for user at end, of processing, number of talkclips
created and how long this took (in seconds).
- Report to user how many talk clips will need to be created to give
them an indication of potential waiting time etc. This is calculated by
first determining how many files are on the device excluding .talk files, and how many .talk
files there are, and calculating the difference.
- This information allows a percentage indication to be drawn throughout
the script, so now the user can track the percentage as processing takes
place.

Patch is attached.

Thanks.

The %pb tag has a small problem. If an image is specified but no height, the tag draws the size of a line even if larger than the the image. This leads to pixel garbage below the progressbar.

The test.wps reproduces the problem in the 320x480 sdl app The default font, 27-adobe, has to be selected probably. The wps works if a height, i.e. 20 in this case as the image height, is specified

Test.png shows the problem. test.zip is the small test theme.

With my 5th generation iPod, if I connect USB while the hard drive is spinning, I often get full speed mode instead of high speed mode. This testing is with 00b8563, but I’ve observed the same problem in the past. Here’s the relevant part of Linux 3.8.0-21-generic dmesg output:

[26644.712035] usb 2-2: new high-speed USB device number 18 using ehci-pci
[26644.904471] usb 2-2: device descriptor read/all, error -71
[26644.965905] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.967780] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.968004] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.971577] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.973440] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.973459] hub 2-0:1.0: hub_port_status failed (err = -32)
[26645.176048] hub 2-0:1.0: unable to enumerate USB device on port 2
[26645.428038] usb 6-2: new full-speed USB device number 8 using uhci_hcd
[26645.979070] usb 6-2: not running at top speed; connect to a high speed hub
[26646.009069] usb 6-2: New USB device found, idVendor=05ac, idProduct=1209
[26646.009076] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26646.009080] usb 6-2: Product: Rockbox media player
[26646.009083] usb 6-2: Manufacturer: Rockbox.org
[26646.009087] usb 6-2: SerialNumber: 100000000000A270014B32BEB
[26646.024242] scsi21 : usb-storage 6-2:1.0
[26647.038109] scsi 21:0:0:0: Direct-Access TOSHIBA MK3008GAL BU11 PQ: 0 ANSI: 4
(I’ve removed the remaining USB storage messages because they don’t seem relevant)

If the hard drive is not spinning, I get high speed mode. However, there is a disconnect and the device is detected twice:

[27356.784126] usb 6-2: USB disconnect, device number 9
[27371.208044] usb 2-2: new high-speed USB device number 24 using ehci-pci
[27371.347053] usb 2-2: New USB device found, idVendor=05ac, idProduct=1209
[27371.347058] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27371.347062] usb 2-2: Product: Rockbox media player
[27371.347065] usb 2-2: Manufacturer: Rockbox.org
[27371.347069] usb 2-2: SerialNumber: 100000000000A270014B32BEB
[27373.079038] scsi25 : usb-storage 2-2:1.0
[27373.337244] usb 2-2: USB disconnect, device number 24
[27373.640029] usb 2-2: new high-speed USB device number 25 using ehci-pci
[27373.779220] usb 2-2: New USB device found, idVendor=05ac, idProduct=1209
[27373.779226] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27373.779229] usb 2-2: Product: Rockbox media player
[27373.779233] usb 2-2: Manufacturer: Rockbox.org
[27373.779236] usb 2-2: SerialNumber: 100000000000A270014B32BEB
[27373.820382] scsi26 : usb-storage 2-2:1.0
[27374.823266] scsi 26:0:0:0: Direct-Access TOSHIBA MK3008GAL BU11 PQ: 0 ANSI: 4
(Again, I’ve removed the remaining USB storage messages because they don’t seem relevant)

I get the same behaviour regarding high speed vs. full speed mode in Windows 7, but I’m not aware of Windows reporting other USB errors anywhere.

I was sometimes having USB difficulties that seemed to be due to contact oxidization or dust from not using the dock connector in a long time, but I don’t think that’s the cause here.

I’m attaching USB traces from WireShark using Linux usbmon. In both cases I removed all the USB mass storage stuff after get max lun because it seems irrelevant and increases file size a lot. When the result is full speed, something goes wrong after the set address response. When the result is high speed, something goes wrong after the set configuration request. In both cases the first sign of trouble is an interrupt from the USB hub.

This is on a Gigabyte GA-P35-DS3R rev V1.0 motherboard with Intel P35 + ICH9R chipset.

On my Sansa c250v1, the starfield plugin crashes at the address 0x01F80394 with a data abort.
It seems that the plugin is attempting to execute data.
Strangely, it does not happen in the simulator.

I noticed that the playlist seems to become one item shorter when I shuffle it, using the latest Git master branch (commit 70d57080) on a Sansa Clip+.

Steps to reproduce:
1. Clear the playlist by pressing Stop (power button)
2. Add a small number of tracks to the playlist
3. Shuffle the playlist (playlist view, menu, Shuffle)
4. Observe that playlist is one item shorter than before

I tracked the reason for this down, and attach a patch. This isn't a "proper" fix, and is a bit hacky, but it does illustrate what causes the problem.

When playing music, I can hear codec errors in the music. It occurs every time on a certain song, and other songs that are smaller in file size, it does not occur on, but occurs on the next one. I believe it is a buffering issue, and makes the music unlistenable. I used the daily on 10/21/2015

On 320kb/s MP3s it occurs much more often, and 128kb/s MP3s it occurs less often, but when it occurs its a series of glitches that distort the music.

I am sure its not the MP3s themselves, because it doesn't occur in the official firmware, and when I rewind it, it does not make the same sound until later. It has a very prominent 'glitchy' sound and later it changes the speed of the song.

I replaced it with the 3.1.3 MP3 codec, and the same glitch occurs.

I do not have a line out so its made through the speaker, but the problem is so bad that you can hear it very clearly.

The MP3 was 320kb/s

Memo is the glitchy one, and Memo-1 is it being played correctly.

Hi,

I have installed Rockbox build 0F89B04-160628 using this (https://files.freemyipod.org/~user890104/bootloader-ipodclassic.html) method.

I have created a dynamic playlist (Database > long select artist > current playlist > Queue Shuffled). Play and then pause the music and then hold the play button down to shutdown rockbox. Plug in USB cable from your computer (Win10) in to the iPod and the iPod should start powering on and then a white *panic* screen should appear.

Workaround is to have Rockbox already fully booted before plugging in a USB cable from the computer.

Creative ZEN
Daily build: rockbox-creativezen-20170112

Bug description:
When plugging any dummy plastic or a non supported SD card, the device freezes and displays a white screen with a “PANIC” error message.
Plugging a standard SD card works fine.
To restore the system, you have to use a paper clip to do a hardware reset and turn the device on again.

I would like to run my iPod with its keypad locked all the time, thus I wrote a little patch to an option to disable the settings reset during startup regardless of the hold button's position.

You will find the patch attached to this message. I'm not entirely convinced by the name of the new option (or my wording in general) so if you have a better idea, feel free to rename things.

This is a first attempt at creating an entry for the new fft plugin. The button table was automatically generated with the attached python script.

The script takes a file (or - for stdin), looks for an #ifdef CONFIG_KEYPAD….#endif block and if it finds one (and it is relatively simple), it parses it and creates the corresponding LaTeX table.

The script is extremely simple but it does provide a good basis for further work.

Bomberman like game with ai.
Not finished yet - lots of bugs and things to be done are known :)
Tested on Cowon D2 and also on some simulators with the same screen size (will work on other screen sizes too, but not now).
Somebody test it on iPod Video and on Zen Vision:M please.
Any suggestions greatly appreciated!
Hope the patch will work…

## This was tried out with Sansa Fuzev2 simulator version d392da8-140922, built from git on a 64 bit Linux system ##

I discovered something which seems to be a bug somewhere in the place where WPS get interpreted or rendered.

When I use a scrolling line just after a line containing sublines, the scrolling line stops scrolling as soon as the sublines change the first time.

Below are steps to reproduce it on the UI simulator for the Sansa Fuzev2. I think it also works without using a clear configuration. I haven’t tested with a real device, only with the simulator.

Attached are a .wps-file showing the buggy behaviour (’scrollline_after_sublines_bug.buggy.wps’), and a .wps-file working correctly (’scrollline_after_sublines_bug.workaround.wps’), which are the same files as quoted below.

STEPS TO REPRODUCE:

(0) Use Sansa Fuzev2 simulator version d392da8-140922, build from git on a 64 bit Linux system.

(1) Use a clear configuration, so erase

    .rockbox/.playlist_control
    .rockbox/config.cfg
    .rockbox/nvram.bin
    .rockbox/database.ignore
  in your 'simdisk' directory.

(2) Start the rockbox UI simulator

(3) Change the theme to ‘rockbox_failsafe’, i.e. in the menu, do the following:

• ‘Settings’ → ‘Theme Settings’ → ‘Browse Theme Files’ → ‘rockbox_failsafe.cfg’
• ‘Settings’ → ‘Theme Settings’ → ‘While Playing Screen’ → ‘rockbox_failsafe.wps’
• ‘Settings’ → ‘Theme Settings’ → ‘Radio Screen’ → ‘rockbox_failsafe.fms’
• ‘Settings’ → ‘Theme Settings’ → ‘Base Skin’ → ‘rockbox_failsafe.sbs’

(4) Use the following .wps-file as the “While Playing Screen” skin:

=⇒ # Two sublines:
Text1;Text2
# A long line, scrolling:
%sA very long text which is meant to scroll because it is longer than the screen is wide.
# Another line of just text (Not needed to reproduce the bug, but if it is swapped with the long line above, the long line scrolles correctly):
Textline.
#### Here the following Bug appears:
# When the Line ‘Text1;Text2’ changes the sublines the first time, the subsequent line stops scrolling. It happens when the sublines change; as when you use ‘%t(5)Text1;Text2’, the scrolling stops only after 5 seconds, when the sublines actually change.
⇐=

Workaround:
(4a) Put the scrolling line not directly after a line with sublines. The following .wps as the “While Playing Screen” skin works:

=⇒ # Two sublines:
Text1;Text2
# Another line of just text. Needed to make the long line scrolling correctly:
Textline.
# A long line, scrolling:
%sA very long text which is meant to scroll because it is longer than the screen is wide.
#### Here the bug does not appear, the long line scrolls corretly. But when the long scrolling line is put just below the line with the sublines, it stops scrolling as soon as the sublines change for the first time.
⇐=

I use the attached custom WPS that displays the active Replaygain value and type next to the track number.

When playing mpc files created by foobar2000 with the tracknumber/totaltracks tag format, if the track# is 10 or higher and the applied gain negative (as in the attached mpc), mangled characters are displayed between the gain value and type, eg:

10/12 -2.00 dB *gibberish* (Album)

This is reproducible with the latest simulator build d0fffd6-150104 but I only recently noticed the issue and don't know when it began. I have an old sim build 935d8be-121229 and it works correctly there.

This is a post that another user put in the forums that pretty much describes the problems I'm having exactly:

" I have a v1 sansa fuze and been using rockbox since 3.8.1 first came out.I just upgraded to 3.9,did not mess with a-n-y setting at all,pc is windows vista (latest sp).Whenever i drag and drop folders with mp3s in them(be it 58 mb or 300 mb or 600 mb) it starts to copy but halfway through,the process just freezes,clicking cancel freezes the windows explorer for 10 seconds then cancels it.Even worse,when i go check out my sansa fuze at my computer,it's recognized but when i click on it,shows as empty!? so i disconnect safely,theeeen….device needs a hard reset.So i say ok this has happened once or twice before but guess what? it happened again…5 TIMES each on 3 different usb ports.Uninstalled rockbox,went back to official firmware and it's all normal…

So i changed the screen to be always on during plugged in and this is the error i get

data abort at 30054264
FSR 0x8
( domain 0, fault 8 )
address 0xA00000BF "

I am running Windows 7 64-bit and experiencing the same issues. If the player doesn't lock outright, it gives the same error white screen described above. This seems to happen more frequently when copying folders that contain folders themselves, but I've had the problem occur on copying just one folder with no subfolders.

As we know, rockbox will use the information provided by "good" mp3 encoders (e.g. LAME) to ignore the extra padding that occurs at the beginning and end of each mp3 file, so that true gapless playback can occur. Unfortunately we do not always have the luxury of encoding our mp3 files in this way but we might still want true gapless playback. This patch compensates for the use of "dumb" mp3 encoders that do not record the necessary information for this feature.

In cases where it does not detect the proper header information to trim off the extra padding, it will optionally skip up to a full frame of silence (or near silence) at the beginning and end of each track (if the trimming is already specified, this patch does not do any additional trimming).

This can potentially eliminate up to a frame of "real" silence at the beginning or end of a track, but in terms of audibility, that would be completely unnoticeable (and it would only happen on these badly-encoded tracks), while the extra silence is an audible annoyance.

I have added an option to the Playback Settings menu so that the user can disable it if desired.

In my sansa Fuze v2 build 28208 when I insert some album to the playlist and after that I insert another album to the playlist I got this error massege:

Data abort
at 3001AE90
FSR 0x8
(domain 0, fault 8)
address 0xB0166244

thanks!

Sometimes when I shut my unit off and then turn it on again and resume playback, RB resumes from a different place than where it left off, and even though when I resume shuffle is on (as indicated by its icon), it isn’t. It’ll play the current track, then the next track in the playlist (which in my case is in order by track number, so it’ll play the next track on the album), and so on.

If I turn shuffle off and then on again, shuffle works correctly again.

I’m using a build from January 19 (19800-090119) on an Archos Recorder. I
noticed this bug occurring in the 3.1 build as well.

It seems to happen randomly – I can’t figure out anything specifically that I can do to always make it happen.

I am reopening  FS#11501  - Sansa Clip v2 FLAC playback skips regularly, which was closed because a sample file was not provided. I didn't think this was necessary because I stated it happened regularly with just about any file.

I am currently on build 30217. It skipped for me last night on this track:
http://www.archive.org/download/johnbutlertrio2011-07-24.lsdII.flac16/johnbutlertrio2011-07-24_lsdII_t07.flac

I cannot attach the track to this ticket because it is larger than 2mb.

Again, it is nothing inherent in that track: a second playthrough did not skip. That 16-bit/44.1khz track was generated with FLAC 1.2.1b using normal procedures.

This problem has occurred for any build I've ever tried on a clip v2 player.

Here is my original problem statement:

Build 27566 (and all previous builds), Sansa Clip v2.

playback of 16-bit/44khz FLAC format regularly will skip ahead to next track.

in a 60 minute playback session, it'll probably happen 2-3 times. this is not due to a defect in the FLAC files. it happens with any FLAC set I attempt.

this does not happen with the Clip v1 on the same build number.

this is my first bug submitted. I searched for duplicate reports but didn't find anything.

thank you!

External/USB adapters are not correctly detected on my Classic 80Gb, this patch detects it so car mode functionality now works, also the iPod is powered-up when USB cable is inserted.

The function power_input_status() returns USB charger when both external and USB chargers are present. It is possible to detect the external adapter when USB cable is plugged but it is necesary to poll the PMU (not IRQ safe), and i think this information is not currently used at all.

Version: r28861
Used before: r26706

Hello,

with r28861the touchscreen works with glitches.
When I touch a line-item , the system sometimes don't react or the line selector just "twinkle".

My conjecture:
It has somethin to do with the new "kinetic-scroll"-feature, because after a little kinetic-scroll the touch become precise.

(And yes, I've done a calibration: no effect)

When utilizing the database on the iPod Photo (as well as other 4G iPods I have used), on occasion when entering a directory or going to the parent directory, any button on the iPod will need to be pressed before the others will have effect. I.E. before I can scroll to select a song, I must press Select or one of the other wheel buttons. It is severely annoying, in part because it is too sporadic to even be assumed to be a “feature”.

After releasing hold after several minutes of playback with hold enabled, the backlight flickers on and off, if the following settings are enabled:

Backlight on hold: off
Backlight fade in: on
Backlight fade out: on
Caption backlight: on

My theory is that fade-in/out events from the caption backlight somehow get queued up, and happen once hold is released.

Happened as recently as today, with r21438. Reports in IRC said it appeared somewhere between 3.0 and 3.1.

While examining disk performance with  FS#9708 , I found one album where the disk stayed spinning with no activity for 5 s longer when using PIO. This is repeatable with that particular album. With the downloaded r19739-090109 build, this did not happen with the default settings but it started happening as soon as I enabled dircache. Prolonging the disk timeout prolongs the extra sleeping time.

Experimentation with shows that the storage_sleep() part of fill_buffer() (in apps/buffering.c) is executed early in the buffering and it is not executed at the end. With another album where spindown happens properly, ata_sleep() is called twice. Note that ata_sleep() just sets last_disk_activity, and sleep happens over half a second later if there is no disk activity during that period and last_user_activity has timed out.

I think this is a race condition based on how dircache and transfer rates change things. I wonder if it is related to  FS#9541 .

The data mentioned is located at http://spreadsheets.google.com/ccc?key=pkeRcfM0sg949P3a5EYXtew and the delayed spindown is seen in the EP7 PIO test. In that data, also note how sectors written are 5, 10 or 15, with differences between different tests with the same album.

I have a 30GB 5th generation iPod, but I expect this issue affects all SW-codec players.

to reproduce:

1. start a big (20mb or more) track. delete it immidiately after starting it.
2. let the song play until it stops. i guess it stops at the end of the buffer. as an alternative you can ff to the end of the track (which shouldn't be buffered)
3. now you're not able to play any track. if you select a new one from the file browser or database, the wps will show up, but nothing is played and the progress bar won't progress. ff and rw also don 't work. only rebooting helps. shutting down needs really long (~15s).

if you delete a fully buffered song, everything works as expected (well, the song continues till the end, and the next song starts. some devs call that "expected" :D ).

tested with r24091 and an e200, although i guess that the bug is target independent and occurs in the last few thousand revisions :)

When using an image in a theme it shows ugly gradients/dithering, as if it was only 16 bit. When the same image however is used as backdrop (%X tag, instead of ‘regular’ %xl and %xd), it looks smooth and 24 bit.

Attached image shows the issue. Top half shows what Rockbox does when the image is loaded via %xl and %xd. Bottom half shows how the image should look like (and how it does indeed look when it’s used as a %X backdrop).

Tested on a Cowon D2 simulator and on an Android device running RaaA.

also category:
Some containers, like Matroska MKA or like Ogg can contain numerous audio tracks, for example the whole AudioCD contained within single Ogg file.

For example VideoLAN.org plays such files ok, while fails to show separate tracks/tags in playlist.

However, RockBox justs freezes and until reboot can no longer play music (each file is detected as having zero duration)

example can be found: [link deleted - it was a full copyrighted album]

if bookmark=ask is set and the mpeg is stopped, the user is asked for pressing select (for make bookark) or any key (for discard)
on apple devices: if the clickwheel is used for discarding, the bookmark is not set (as intended) but the clickwheel is not working anymore.
to get the clickwheel working again, the keyboard lock has to be set and unset and select has to be pressed.

I have sansa clip+. Lrcplayer opens and plays USLT tag instead of SYLT tag if there are both in mp3 file and no external lyrics(.lrc, .lrc8, .snc, .txt) so lyrics which play are not synchronized. Please make SYLT tag opens and plays defaultly instead of USLT tag.

This is a new plugin that mimics the open source PC program mnemosyne (http://www.mnemosyne-proj.org/), a program that assists with memorizing flash cards. The plugin is fully functional, but it still needs a menu and assumes that the user has setup the folders it needs for storing cards before running (if you don’t create them it will crash). I’ll fix these issues in the near future, but in the mean time any feedback is appreciated :)

This patch attempts to permanently fix the inconsistent mixture of “Title Case” and “Sentence case” in english.lang by applying “Sentence case” to the entire file.

I suggested we do this in a post to the rockbox-dev mailing list last year, but that just ended in a very split discussion with no conclusion.

I’m not sure if this patch wil result in anything different, but I made it for my own use, and thought I would post it, as there were a fair number of posters to that discussion that also prefered sentence case.

The old discussion:

http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-08/0034.shtml

EDIT: I forgot to say this patch also changes a couple of uses of “center” to “centre”…

EQ settings changed via Touchscreen WPS action setting_inc & setting_dec are not reflected in the sound output of the device even though they display having been changed in the menus. The changes are also not written to the main config file on disk so they do not "stick" after Rockbox has been rebooted.

example syntax to toggle EQ on/off (display DOES get toggled):
%T(148,520,54,46,setting_dec,eq enabled)
%T(148,520,54,46,&setting_inc,eq enabled)
%xl(E,eq.bmp,0,0)
%V(148,520,54,46,-)
%?St(eq enabled)<%xd(E)|>

I'm not sure if this problem is specific to Android or if the problem applies to all targets.
APK Build: Feb 4, 2011

I didn't like that the "Backlight on first keypress" function ignores the first keypress no matter which key was pressed. For example, I want the volume keys to work normally even when the backlight is off (that is, they should turn on the backlight *and* change the volume).

This patch restricts "Backlight on first keypress" to certain buttons only. in other words, these buttons work normally only when the backlight is on; otherwise, they just turn on the backlight. As a proof of concept, it changes the Clip and Clip+ behavior to filter out only the Home key when the backlight is off, allowing the other keys to function normally.

It works by allowing button-target.h to define the buttons that are filtered by the "Backlight on first keypress" function. If left undefined, the function filters all buttons when the backlight is off, as in the status quo.

[EDIT: Clarified that there is no overlap with  FS#9305  - Context sensitive backlight on key press]