Rockbox

All i know is that this happened on 590mb tta file and after cutting it with cue splitter there was no problems with playback.

SVN:31187

since build 31646 text viewer stops bookmarking or saving the last position on any file it shows bookmark added when i press the center+down buttons but doesn’t actaully save it.
seems to have a problem writing to the file tv_file.dat.

Hello.

Can you somebody add some info about using talkclip for shortcuts.txt
in manual section 5.14 Shortcuts.

I'd recommend replace this

 "talkclip: <filename clip of a talk that speak When voice menus are enabled>"

for this

"talkclip: <filename clip with full path of a talk that speak When voice menus are enabled
 (example /.rockbox/filename.talk)>"

I suggest this because I took a long time before I figured out how it should be properly.

The %pb tag has a small problem. If an image is specified but no height, the tag draws the size of a line even if larger than the the image. This leads to pixel garbage below the progressbar.

The test.wps reproduces the problem in the 320x480 sdl app The default font, 27-adobe, has to be selected probably. The wps works if a height, i.e. 20 in this case as the image height, is specified

Test.png shows the problem. test.zip is the small test theme.

I'm using a Sansa Clip Zip, which hasn't been added to the Player Type list. I've noticed that several MIDI files crash the player, reporting OUT OF MEMORY and MALLOC BARF errors. This is more likely to happen with MIDI files with many instruments, such as orchestral pieces. One example is a MIDI file for Debussy's La Mer. It tries to load all instruments into memory before playing and will crash without playing anything. I don't know if this can be fixed with better memory management or if my player just has too little RAM.

Current developer build (2012-06-10), on Sansa Clip Zip
While audio is playing, connecting USB and disconnecting it again causes a splash with message “Error accessing playlist control file”. Sometimes followed by a hard crash (like undefined instruction).

Initial analysis shows that the problem occurs in playlist.c:get_filename. An lseek in the playlist control file fails. This lseek fails because the file descriptor (fd) was closed during USB connection. On receiving a SYS_USB_CONNECTED event in apps/misc.c, function system_flush() calls playlist_shutdown().
So the playlist subsystem seems to have been de-initialised during USB connect, but not completely, causing problems when the playlist subsystem resumes during USB disconnect.

This is reproducible on the simulator.

I'm running Rockbox 3.11.2 on a Sansa Clip+.
I followed these steps:
- go to the Main Menu
- Files
- long press on <microSD1>
- Playlist Catalogue
- Add to New Playlist
I tried to save the playlist with a long press of the select button (not sure of the button's actual name; it is the button in the middle of the 4-way controller and the one that is usually used to select the highlighted option). I was returned to the Files menu. The playlist did not get saved, and there was no error explaining why.

As a result, I spent a long time assuming that long press of select was a "cancel" action, and tried short and long presses of every other button trying to save the playlist.

Workaround: instead of accepting the suggested filename, remove the "<" and ">" characters from the auto-entered filename ("/Playlists/<microSD1>.m3u8") to be able to save the playlist.

Suggested fixes: The filename suggested by Rockbox should not include "<", ">", or other un-saveable characters. In addition, if the user tries to save a file with invalid characters, a warning or error message should be posted (like the "Cancelled" message that briefly pops up when the power button is pressed to exit from the set-filename screen).

Daily build: c413591-120705 and earlies.
When I connect powered down my Fuze V1 and disconnect from USB, it hangs displaying USB screen. I must hold power switch for several seconds to power off player. Tested on two different machines with windows7 x64. When I connect powered on player everything works perfectly.

When trying to start RockDoom on the iPod Classic, Doom appears to load normally until the iPod crashes and says "Prefetch abort at 71D0BF24 FSR (domain 0, fault 5)". Build ver. 8abdd9b-120902

As the title suggests, fun things like: https://plus.google.com/102855057878446061693/posts/FkQ4wQZb8VD can happen in this instance.

Initially reported here: http://www.rockbox.org/irc/log-20130113#07:14:49

[Saint]

When my Fuze+ is charged and it's still connected to the charger, it seems it keeps toggling between charging and discharging.

I think the problem is that it reacts to some voltage to stop charging. When it's charging it measures up to 4.35 V. But when it stops charging it changes to 4.25V, and says something like 96-99% charged, and which point it changes to charging again, and so on.

So it's basicly toggling between charging and discharging very often, and I don't think that's very good for the battery. Once it's charged it should stop charging as long as the charger is connected. (This might apply to other devices too.)

This was with version 2ef7a54-130111

Kurt

Hi there,

  this is a WIP plugin that I wrote last year.  It plays amiga music using the UADE library.
  You can find more about it here: http://zakalwe.fi/uade/

  I'm a bit new to git so please forgive me for not uploading a proper patch.

  To test the plugin, simply copy the bitmap and rockuade folders to the plugins folder in
  rockbox sources.  And you have to extract the data.zip file in the .rockbox folder.

  I'm not going to work on this anymore, so I decided to upload it here, and hope someone
  can make a proper patch and maybe some dev would be interested in testing it, make 
  the necessary changes and upload an stable release.

  Please read the README file for some additional info about the plugin.

  Tested on:    samsungypr0, fuze+, fuzev2
  Commid ID: e1ea08417bca57c607df6686472fa0a86f38b6d1

Hi there,

  this is another WIP plugin that I wrote last year.  It plays videogame streamed music
  using the vgmstream library. Original homepage here:
  sourceforge.net/projects/vgmstream/

  I'm a bit new to git so please forgive me for not uploading a proper patch.

  To test the plugin, simply copy the rockstream folder to the plugins folder in
  rockbox sources.  And you have to extract the data.zip file in the .rockbox folder.

  The formats.db found in data.zip is basically a list with all vgmstream supported
  extensions (at least "all" by the time I wrote the plugin).  You can add  or remove 
  new or unwanted extensions there.  The plugin will only handle the extensions found
  in the formats.db.

  Currently the plugin works as a viewer plugin, and there is only one extension associated
  with the plugin in viewers.config for testing purposes, but you can always use the 
  'open with' option from rockbox.  Once you open a file the plugin will parse all supported
  files found in the same folder.

  The vgmstream project is updated quite often, if someone wants to
  update the core library, I believe that would be very easy, since I only changed a couple
  of things to it.

  I'm not going to work on this anymore, so I decided to upload it here, and hope someone
  can make a proper patch and maybe some dev would be interested in testing it, make 
  the necessary changes and upload an stable release.

  As a last comment, I have only tested the plugin in the simulator, samsungypr0, fuze+
  and ipod nano. It only worked in the simulator and samsungypr0, so hope someone can 
  fix that.

  Please read the README file for some additional info about the plugin.

  Working on:  simulator and samsungypr0
  Commid ID: e1ea08417bca57c607df6686472fa0a86f38b6d1

Key lock (activated by pressing Power in the WPS) deactivates when music playback stops (end of playlist). The keypad then becomes active again. It shouldn’t get activated until Power is pressed again.

Hi,

I’m experiencing an issue with WMA Pro playback on my Clip Zip.

I’ve got the lastest stable build of Rockbox 3.13. Files were encoded with dbpoweramp.

Some files playback normally, but majority of tracks skips. Always at the same point if not forwarding or rewinding.

Here’s a sample. The track skips at 2.15.

With my 5th generation iPod, if I connect USB while the hard drive is spinning, I often get full speed mode instead of high speed mode. This testing is with 00b8563, but I’ve observed the same problem in the past. Here’s the relevant part of Linux 3.8.0-21-generic dmesg output:

[26644.712035] usb 2-2: new high-speed USB device number 18 using ehci-pci
[26644.904471] usb 2-2: device descriptor read/all, error -71
[26644.965905] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.967780] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.968004] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.971577] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.973440] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.973459] hub 2-0:1.0: hub_port_status failed (err = -32)
[26645.176048] hub 2-0:1.0: unable to enumerate USB device on port 2
[26645.428038] usb 6-2: new full-speed USB device number 8 using uhci_hcd
[26645.979070] usb 6-2: not running at top speed; connect to a high speed hub
[26646.009069] usb 6-2: New USB device found, idVendor=05ac, idProduct=1209
[26646.009076] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26646.009080] usb 6-2: Product: Rockbox media player
[26646.009083] usb 6-2: Manufacturer: Rockbox.org
[26646.009087] usb 6-2: SerialNumber: 100000000000A270014B32BEB
[26646.024242] scsi21 : usb-storage 6-2:1.0
[26647.038109] scsi 21:0:0:0: Direct-Access TOSHIBA MK3008GAL BU11 PQ: 0 ANSI: 4
(I’ve removed the remaining USB storage messages because they don’t seem relevant)

If the hard drive is not spinning, I get high speed mode. However, there is a disconnect and the device is detected twice:

[27356.784126] usb 6-2: USB disconnect, device number 9
[27371.208044] usb 2-2: new high-speed USB device number 24 using ehci-pci
[27371.347053] usb 2-2: New USB device found, idVendor=05ac, idProduct=1209
[27371.347058] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27371.347062] usb 2-2: Product: Rockbox media player
[27371.347065] usb 2-2: Manufacturer: Rockbox.org
[27371.347069] usb 2-2: SerialNumber: 100000000000A270014B32BEB
[27373.079038] scsi25 : usb-storage 2-2:1.0
[27373.337244] usb 2-2: USB disconnect, device number 24
[27373.640029] usb 2-2: new high-speed USB device number 25 using ehci-pci
[27373.779220] usb 2-2: New USB device found, idVendor=05ac, idProduct=1209
[27373.779226] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27373.779229] usb 2-2: Product: Rockbox media player
[27373.779233] usb 2-2: Manufacturer: Rockbox.org
[27373.779236] usb 2-2: SerialNumber: 100000000000A270014B32BEB
[27373.820382] scsi26 : usb-storage 2-2:1.0
[27374.823266] scsi 26:0:0:0: Direct-Access TOSHIBA MK3008GAL BU11 PQ: 0 ANSI: 4
(Again, I’ve removed the remaining USB storage messages because they don’t seem relevant)

I get the same behaviour regarding high speed vs. full speed mode in Windows 7, but I’m not aware of Windows reporting other USB errors anywhere.

I was sometimes having USB difficulties that seemed to be due to contact oxidization or dust from not using the dock connector in a long time, but I don’t think that’s the cause here.

I’m attaching USB traces from WireShark using Linux usbmon. In both cases I removed all the USB mass storage stuff after get max lun because it seems irrelevant and increases file size a lot. When the result is full speed, something goes wrong after the set address response. When the result is high speed, something goes wrong after the set configuration request. In both cases the first sign of trouble is an interrupt from the USB hub.

This is on a Gigabyte GA-P35-DS3R rev V1.0 motherboard with Intel P35 + ICH9R chipset.

The filename cover.jpg works ok. But {album}-{artist}.jpg doesnt wokr. Also the albumart appears on the WPS, but not in the Pictureflow

(Confirmed this in 4c6c8cd-130926, discovered in build from several weeks earlier)

If ‘Voice Menus’ are enabled, entering the Recording menu will freeze the player…usually before the entire screen is redrawn. Although I can still hear the sound the mic is picking up, the player is locked up, and removing the battery or super-long-pressing of Power is required.

During my testing, I was able to randomly get it to -not- lock up, but it was like a 1 in 50 occurance…tried all formats/sample rates/etc. When ‘Voice Menus’ is -disabled-, all formats/rates/etc work fine.

Thinking it was a problem with my config that I’ve been using for years, I tried with a clean config.cfg (well, deleted and let it regenerate), and narrowed the cause down to the spoken ‘Voice Menus’ being enabled.

Short Next + Long Next causes a hang about 50% of the time. This was reported before and still seems to happen on the Clip Zip.

When I connect my Sansa Clip Zip with most recent Rockbox version to my pc (Windows 8) while it’s paused or not playing a song at all, pc gives message ‘Device not recognized’.
When a song is playing, and I connect the player to the pc, the song will pause (expected behaviour of course), and I can access the internal and sd storage on the device.

After setting the “Charge During USB Connection” Rockbox setting to “no”, the battery in my iPod Classic still gets charged whenever connecting the iPod to my PC via USB. From the iPod Video manual:

“This option lets you control whether the player should charge during the USB connection and hence draw the full 500 mA. Turning it Off is recommended if the player is connected through an unpowered USB hub or a laptop port.”

I would expect the battery NOT to get charged. Running Rockbox dev build 9576134.

On my Sansa c250v1, the starfield plugin crashes at the address 0x01F80394 with a data abort.
It seems that the plugin is attempting to execute data.
Strangely, it does not happen in the simulator.

Metronome plugin is not functional on Ipod 6G.

Steps to reproduce:
1) Open metronome;
2) Hold the "Select" button.

Expected:
– The metronome starts to tick in the headphones.

Observed:
– The text on the screen changes from "start: hold select" to "stop : cancel", but no sound is made.
– A short click on the Select button emits a single tick sound, but the tapped frequency cannot be captured as the Ipod 6G does not have any "Record" button.

Comment:
As single taps can be made, the metronome.c / play_tock() seems to work
and at least some sort of sound can be produced on this hardware,
maybe something is wrong with the timer_callback() ?

I noticed that the playlist seems to become one item shorter when I shuffle it, using the latest Git master branch (commit 70d57080) on a Sansa Clip+.

Steps to reproduce:
1. Clear the playlist by pressing Stop (power button)
2. Add a small number of tracks to the playlist
3. Shuffle the playlist (playlist view, menu, Shuffle)
4. Observe that playlist is one item shorter than before

I tracked the reason for this down, and attach a patch. This isn't a "proper" fix, and is a bit hacky, but it does illustrate what causes the problem.

The following link to example.m4b file which I can’t open in latest rockbox build (4c4c645) on my sansa clip+ and sansa clip zip:
https://cloud.mail.ru/public/KeHt/tmu5sr9YR

I can open it on my computer without any issues.

Use of the sleep timer deactivates the idle power off. Both should be independent pathways to shutdown. The Idle Poweroff should initiate shutdown if there is no playback and no keypress inside the indicated time. The sleep timer only is to use keypresses. However, the actual behavior is for the sleep timer to disable the idle poweroff. This is a bug. Instead of either or it (If … else if) should be two "If then .. If then" constructs.

The benefit is that you can save battery life if you leave the device on while player, or if you get interrupted. Currently, you can only do one.

To replicate:
use sansa clip, latest version. Set idle power off at 1 minute and sleep timer at 30 minutes (default). Play then pause for two minutes. Press volume button and note unit is on instead of off.

Hi,

I have installed Rockbox build 0F89B04-160628 using this (https://files.freemyipod.org/~user890104/bootloader-ipodclassic.html) method.

I have created a dynamic playlist (Database > long select artist > current playlist > Queue Shuffled). Play and then pause the music and then hold the play button down to shutdown rockbox. Plug in USB cable from your computer (Win10) in to the iPod and the iPod should start powering on and then a white *panic* screen should appear.

Workaround is to have Rockbox already fully booted before plugging in a USB cable from the computer.

Pure i20 does not charge the iPod classic with OS rockbox.
I feel like Rockbox can not recognize interface pure i20 (drivers?)
Through Pure i20 will not play music even if it is in the installed Rockbox in the iPod.(only apple Flash = possible charging/playing via Pure i20)

I own Ipod classic 6G 160GB (flashed rockbox)

Build 575bd89 2016-12-19

Playing the attached zero-duration WMA '_ length 0.0s WMA.wma' causes crash:

Divide by zero at 6008D274
pc:6008D2&4 sp:600CC7DC
bt end

This WMA file was created by Goldwave and plays without crash in Windows Media Player, GoldWave and MediaMonkey.

Zero-length WAV and MP3 files (examples attached) don't cause a crash.

On the latest development iPod Video and ZEN simulators, MP3 and WAV are reported 'failed' and WMA crashes http://i.imgur.com/k3dKaSN.png http://i.imgur.com/CiYnVuH.png

Creative ZEN
Daily build: rockbox-creativezen-20170112

Bug description:
When plugging any dummy plastic or a non supported SD card, the device freezes and displays a white screen with a “PANIC” error message.
Plugging a standard SD card works fine.
To restore the system, you have to use a paper clip to do a hardware reset and turn the device on again.

Whenever screendump is enabled,It gets a panic error.
Error Message:
*PANIC*
Stkov usb
pc:080739ac sp:080f5458

I would like to run my iPod with its keypad locked all the time, thus I wrote a little patch to an option to disable the settings reset during startup regardless of the hold button's position.

You will find the patch attached to this message. I'm not entirely convinced by the name of the new option (or my wording in general) so if you have a better idea, feel free to rename things.

I have an upgraded iPod 5.5 with CF 32Gb installed in CF-ZIF adapter.
Both iTunes & Rockbox are working fine with this setup.

Then I tried to increase the storage space by using mSata SSD 64 GB + mSata-ZIF adapter. iTunes recovered the iPod successfully and it is working just fine. I installed Rockbox latest stable (non-stable latest = same thing) version & after the Rockbox boot-up it reporting an ATA error -11.

I wonder if this can be solved.

Thanks!

When playing music sometimes crackling sound especially when playing bass

Version 9e186e34ab-190820

i have an ipod 7th gen
rockbox installed
140.000 titles

database contains in unpredictable many cases of the folders 2 times the same title
not in all folders, but it happens very often that i open one and i see all titles 2x although they are only 1x on the sd card

the files exist only ONCE
but the database keeps listing them all 2 times

i rebuilt it several times, but the database keeps on doing that

any hint what i can do?

start as apple / itunes and delete rockbox folder / install new did not help

With my theme “lebellium Samsung-like” for Clip Zip there are some display issues in FMS, more precisely the status bar, while the code is the same as in WPS and SBS. See the pics in attachment.

How it should look like instead:
http://themes.rockbox.org/themes/96x96/lebellium_samsung-like_%28big_aa%29_96x96_v1.00/3-FM_radio_bigAA.png http://themes.rockbox.org/themes/96x96/lebellium_samsung-like_96x96_v1.45/2-FM_radio3.png

After bisecting, I found out that the 1st bad commit is acf3af4 by JdGordon: radio: fix  FS#12747  http://git.rockbox.org/?p=rockbox.git;a=commit;h=acf3af4

Rockbox version 3.13
Wenn I delete a file being played, it continues to play (which is OK for me). But when I rewind in this file while playing, Rockbox hangs and does not respond to any key presses. The screen light stays on. I have to press the hard reset or wait until the battery is empty.

This also sometimes happens when I press fastforward, but it always happens when pressing rewind.

Desired behavior:
- Preferred: permit rewinding/fastforwarding (and really delete the file only after stopping the replay)
- ignore rewind/fast forward; alternatively
- skip to the next file immediately after deleting.

Thanks for reading, and please contact me if you cannot reproduce this! I have a Iriver H140 and I must say that all my recordings are in wavpack (recordings made using SPDIF-IN), so I do not know whether this also happens with other file formats and with other players.

-Stefan

Ordinarily, when Rockbox is shut off and turned back on, it will remember the position in the last-played song, and begin playing from where you left off. However, in the latest build, Rockbox doesn't remember the last track that was playing if the file used a relative path. This happens on every version of 3.14 including the current daily build (2017-11-13).

Here is how the error can be reproduced:

Have a folder with two songs. Then, in the parent folder, create two m3u playlists named "absolute.m3u" and "relative.m3u".
.\
—absolute.m3u
—relative.m3u
—MUSIC\
——song1.ogg
——song2.ogg

In the absolute.m3u playlist, add the following lines:
MUSIC\song1.ogg
MUSIC\song2.ogg

In the relative.m3u playlist, add the following lines:
.\MUSIC\song1.ogg
.\MUSIC\song2.ogg

To see expected behavior:

1.) Open the files list, and run absolute.m3u and song1.ogg begins playing.
2.) Push right to start song2.ogg. Let it play a few seconds in.
3.) Turn off your device by pressing power.
4.) Turn on your device with the power button.
5.) song2.ogg continues to play the same song at the same location as when it was shut off.

To reproduce the bug:

1.) Open the files list, and run relative.m3u and song 1 begins playing.
2.) Push right to start song2.ogg. Let it play a few seconds in.
3.) Turn off your device by pressing power.
4.) Turn on your device with the power button.
5.) song1.ogg plays from the very beginning.

The file format of the songs doesn't seem to matter (I've tested ogg and mp3).

I think commit 1654efc31339972d0e6bd41a499fcffc0a45822e introduces the following error:
storage_init in firmware/storage.c does not return an rc error code in case !CONFIG_STORAGE_MULTI
because its discarded here:

#else /* ndef CONFIG_STORAGE_MULTI */
+ STORAGE_FUNCTION(init)();
+#endif /* CONFIG_STORAGE_MULTI */

+ storage_thread_init();

   return 0;

This patch was meant to add a DJ type feature, that would announce each song if a “.talk” clip exists for it. Unfortunately, it’s not as simple as calling talk_file() each time the track changes, because that breaks playback because of CPU inadequacy. Works mostly fine for WAV files though.

The solution is probably to halt playback until the clip has been played, but that’s beyond me.

I have not added a settings interface to this, since the feature is really very incomplete. I’d love if someone would pick it up from here though.

This is the first plugin I’ve ever written from scratch, and well, it was fun. I haven’t worked out how to use bitmaps yet, bear with me, for now it uses coloured rectangles. Still learning :p.

If this were to get committed, please wait until I’ve added better support for more targets, commented as many lines as are possible to help other people new to making plugins, potentially add AI (Although that would kinda ruin it as it would probably force a draw every time), and figured out how to use bitmaps properly.

If people are willing to test this out for me and tell me any bugs, please do so. I have tested this on the H10, the Gigabeat, and, using the simulator, the iPod mini G2 (Which displays it but out of alignment, will work on that soon.

I realize it’s not too exciting, but for my first real bit of work in C I’m happy :p.

It would be nice to be able to change volume while using the stopwatch plugin. If I don’t have the volume perfectly adjusted when starting my jogging round, I have to choose between running the rest of my laps with too low/high volume or discarding my times to change it, as the scroll wheel doesn’t have any function in the plugin.

Holding the Pause button (to move/paint down) will shut down rockbox.

This shutdown combination should be disabled for Rockpaint!

While I’m at it (and you can put this in a different Flyspray if you want), I suggest that we make use of the iPod scrollwheel somehow in Rockpaint, maybe to change the size or shape of the brush or something and/or in the menus.

I would also like to be able to set the colour of the background to start with.

Obviously there is no one who wants to open a mp3 file with text viewer. With this patch applied, ‘Open With..’ only shows plugins that are associated in ‘viewers.config’. To see a full list of viewers plugin, just set the ‘Show Files’ option to ‘All’ and try again.

Some builtin filetypes are text file, so I added them into ‘viewers.config’ for the accessibility.

This patch changes the iriver H300 series bootloader's power and usb handling. When a USB or Power plug are inserted into the H300, it will now boot as normal, not stop in the bootloader usb/charging modes. This was mainly for use in my car, but is also helpful for people with charging cradles for their computers.

Forum thread can be found here http://forums.rockbox.org/index.php?topic=17202.0

The following patches will allow someone running openBSD to run ipodpatcher. This is my first pass at these patches, so they cannot be integrated without some problems.

A few outstanding questions remain:

1) should I use /dev/sd0c or /dev/rsd0c?

2) why do byteorder(3) functions exist in fat32format.c?

3) how do the developers want to handle disk geometry?

I ask the last question because my patch overwrites the existing ioctl with what works for openBSD, rather than separate it out. And the patch doesn't fully use what is available in struct disklabel. I plan to re-write this one.

The fat32format.diff comments out byteorder(3) functions. The ipodio-posix.diff converts the file to openBSD disk geometry. The ipodpatcher.diff corrects the device used.

I have only tested the patches above for ipodpatcher on iPod nano 1st gen.

I was reading http://forums.rockbox.org/index.php?topic=17079.0 and thought I’d take a swing at it. So far, I have added (potentially shaky?) support for the ‘#’ comments in the file posted, allowing both Windows and Linux line ending formats, and longer filename support.
Still having problems with the white space after each entry, and detecting or assuming the presence of the file extension.

The H10 5G MTP needs a different bootloader than the UMS version (see http://www.rockbox.org/twiki/bin/view/Main/IriverH10PortDevInfo#Build_a_Rockbox_Bootloader).
I’m not sure about the correct way to do this in configure, so I’ll leave it to someone who is.

This patch will make an e200 present its SD card as an ipod mini 2G when queried by iTunes. It does this by changing a number of things:

1) Responding to SCSI inqueries
2) Using Ipod USB vid/pid and other usb details

The patch also enables logf for the usb_storage.c because I’m in a bit of a hurry.

To use this, make sure you have a partition on the SD card of type 0 (any size should do) and also the appropriate Ipod file structure (can be generated with e.g. gtkpod).

This IS a duplicate of  FS#6904 .

My iaudio x5 hangs when changing directories via short+long direction button presses. It switches to the next directory, but no audio plays, and the WPS shows that it stops at 0:02 of the track.