A new background image for bubbles that looks a lot better.
Made using GIMP and images from frozen bubble.

Copy the attached file to ‘apps/plugins/bitmaps’.

I’ve been using the latest dev builds everyday for iPod Nano 2G and still encountering “Swapped Channels” on Playback (e.g. Left Channel → Right Headphone / Right Channel → Left Headphone).

Used latest build 5785cfb-120625

The Idle Poweroff only reboots my 1G iPod. I assume it should power it off or put it into a power saving mode. This forces it to use up the battery faster then normal unless I set the Hold button to boot into the iPod firmware to do a proper suspend when Rockbox reboots.

If Rockbox is connected via USB with no sd card inserted and it is inserted, it offers the OS to mount the new drive.
If the sd card is removed and reinsterted again, it fails to offer and recognize it.

I could locate the problem in firmware/usbstack/usb_storage.c in the line

if(inserted && check_disk_present(IF_MD(volume))) {

after reinserting the card, check_disk_present fails to return true, so this check fails and the card isn't recognized anymore.

This patch modifies the Gigabeat S keymap so that it can be used almost solely using the buttons on the face of the player.

Currently, there is an unused button in the WPS screen (the BACK button, up-left from the cross) which in my mind makes more sense as the “back to the menu” button, while the MENU button (up-right from the cross) is the logical Play/Pause button (at least to a right-handed individual). It’s unfortunate that the button with the Windows logo has been called the MENU button in the code, thus making this rather confusing to read, but if enough people agree with the feel of this change, that could be modified as well.

When you play back a broken flac file (in this case a file that was truncated) it can happen that he decoder outputs constant loud noise instead of just skipping to the next track.

I’m not sure if this is really a bug since you are not supposed to play back broken files.

Attached is a file where this happens.

H300 r18009 (happens in the uisim too).

This was reported in the past as part of another bug (FS #6707), and although the other one hasn’t happened anymore, this one still does.

Happens only from time to time. Scenario:

- player is playing song (in WPS), backlight off
- press stop
- only backlight goes on, playback continues

I attach this to H300 series but this may not be player specific

I noticed that when filling the buffer my Video iPod (32MB RAM) does noticeable seeks at semi-regular intervals even if reading from a single non-fragmented file. It seems this is due to having to read the next FAT sector. In firmware/drivers/fat.c there is a FAT cache but no read-ahead of the FAT.

I created fat_preload( struct fat_file *file, long sectorcount ) in firmware/drivers/fat.c to preload the FAT cache. In firmware/common/file.c I created file_preloadfat(int fd, size_t count) because calling a fat_ function directly would be too much of a kludge. I use file_preloadfat in apps/buffering.c just before filling the buffer.

This got rid of that regular seeking and it seems to it can remove about two seconds from the time needed to fill the buffer when reading a single non-fragmented file. Currently the code is quite simple and unintelligent. Fragmentation or other activity can overwrite the pre-loaded FAT sectors in the cache, and in such cases the pre-load leads to needless extra reads. More work is probably needed before this can be included in Rockbox.

Currently this patch is for SW-codec only. I think file_preloadfat could be called from HW-codec buffering code also, though few seeks would be prevented with 2MB of RAM. This patch is also probably useless with flash storage.

to reproduce:

1. set playback settings–>fade on stop/pause to on.
2. play some music.
3. press the pause button to stop the music, and again to restart it. repeat that a few times, because this bug does not always occur.

you will notice that both “time-displays” sometimes change very to the previous second and then back to the normal one, e.g 3:32, then very short 3:31, and back to 3:32. the progressbar sometimes get smaller for a fraction of a second, too.

maybe i’ll search for the revision which introduced this in the next few days

Note: This is work in progress.
Status: Code implemented

      Manual not updated
      Wiki not updated (only after commit)

The idea of this patch is to have the same keyboard keys assign to the same actions in all platforms.

For example, have +/- keys (both on keyboard and on Numpad) are assigned to Volume Up and Volume Down keys of the original platform.
For platforms which do not have these keys, pressing the +/- keys in the simulator will do nothing.

This change will help developers to do manual regression testing on lots of platforms easily, as they do not have to memorize each platform’s key assignment.

Future development: Display key assignment on screen, and/or on console

Hi, firstly i put Sansa c200 because SansaClip+ is not available in the list.
My player is a Sandisk SansaClip+ bought 6 months ago with an 8Gb class 4 Sandisk microsd (that is currently empty, no songs stored).

Steps to reproduce the issue (after a fresh installation of the Firmware, no settings changed):

1) Switch on
2) → database
3) → track
4) select any track
5) press the central button
6) Erase Dynamic Playlist? is displayed.. Select Yes
7) countdown then starts to play
8) Seek to the next song (it happens at the first seek or might need three, four one after the other)

Data abort
at 30813E44
FSR 0x8
(domani 0, fault 8)
address 0x62E90028

- I installed version 3.10 on top of version 3.09, but later on I tried to uninstall completely 3.10 and reinstall it from scratch and the issue is the same.

- After the crash i have to keep the "switchoff" button pressed for a while.. then I press it again to restart the player and I try to resume the song I get "playlist control file is invalid" or "nothing to resume"

- behavior is the same with or without the SD card

- The issue was randomly happening (but very very rarely) also on the previous version of the firmware (3.09) I got the error a couple of times in 6 months.

Steps to reproduce:

1. Create a directory: /AUDIO;BOOKS
2. Place a file in it: /AUDIO;BOOKS/file.mp3
3. Start playing the file, and then create a bookmark
4. Do “List bookmarks” for the file
5. The bookmark menu lists something like this:

BOOKS/;file
0:02, 2, Shuffle

The problem seems to be that .bmark files use semicolons to separate the fields of information. If there’s a semicolon in the path, it thinks that it indicates the end of the path and the beginning of the filename.

I have RockBox version 3.9 on my Sansa Fuze v2 and so far I love it, but I have one problem. On a few tracks in my library, when I play them, the first few minutes of the song will be strangely distorted. Most of them are songs where the music starts off in just one of the speakers before moving into the other one. There will be bursts of loud, crackly noise in the other speaker during these first few seconds (that seem to be in time with the music) and then it will fix itself and the rest of the song will play perfectly. When I boot the default Sandisk firmware the songs play perfect like they should, it is only in RockBox that this glitch happens. I’ve messed with the settings a bit and even reset them completely, but nothing has worked thus far.

Attached is one of the songs that this happens with, from about 2 seconds in to about 7 seconds in. Any help would be greatly appreciated. I really want to enjoy my music without that crap in it.

Here’s a patch to version r29143M-110324 that adds the Zipit Z2 as a build target. It requires one new file (also attached) firmware/target/hosted/zipit/powermgmt-zipit-z2.c to monitor the battery.

This is mostly a generic SDL app with a few tweaks for the Zipit buttons and battery monitoring. The patch also includes a few small bug fixes for SDL app builds. I had to fix the labels in the asm section of lcd-16bit.c. There were some missing parenthesis on an #ifdef in button-application.c. And the apps/SOURCES file needs an #ifdef to handle an SDL app build without touchscreen support.

This patch adds a secondary backlight timeout (similar to what the the iPod OF does).

It adds two extra settings: secondary backlight timeout and secondary brightness (I'm not sure wrt the naming of those, any suggestions?)

The code isn't very clean, but it works (except for CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_PWM targets, for which I haven't implemented this).

Please test this.

The location for recordings can be set, but the only way to see the current value for the setting is to look into the config file. The patch adds a note stating that to the manual.

Also, there is a known bug ( FS#12517 ,  FS#12500 ) preventing saving the recorded files in the root directory (maybe this applies only to some targets, not all). The patch adds a warning about that.

RB does not play AC3 tracks which were extracted from DVD with splitting one-track/one-song (splitting by chapters).

In other words - if you extract single AC3 song RB will not be able to play it back, despite the fact foobar2000 and Winamp with AC3Filter plugin will play it fine.

It is not a problem related to extracting software as the problem occurs for AC3 files saved by DVD Audio Extractor and SmartRipper. (Files saved by them are bit-bit the same as file comparison showed).

Simulator does not display any debugging info when you try to play AC3 file which RB is unable to play.

AC3 playback is not completely broken because RB plays AC3 files if you extracted full AC3 track without splitting it.

Hello World :)
Attached is a VBR WMA music file, which fails to play correctly on my “RockPod” iPod Nano.
The same file decodes perfectly using the latest ffmpeg build.
Therefore I can only assume there is something about this file which triggers a bug in the Rockbox-specific WMA decoder.
Also attached is a microphone recording of the sound which comes out of my iPod when Rockbox attempts to play the faulty WMA.

I have over 3000 WMA tracks, all encoded using an identical method, all of which will not play correctly in rock box, so if you would like any more examples, or information, please ask.

Thanks for all your help :)
(If there is any way I can help debug/update the code for the wma decoder, please let me know where to start, I understand the C source code pretty well)

~Andrew

when the FM tuner is turned on and say that you want to go to Add a Preset you cannot hear thevoice over the radio. this should be controlled where the Fm volume is turned down and the volume of the voice is turned up just like in playing regular music.

When the battery is nearly empty and the iriver H10 is about to shutdown, the volume sometimes suddenly increases progressively, as if the volume UP button was pressed and held down, all the way up to the maximum.

This has happened to me about 3-4 times so far. Pressing the volume DOWN button somewhat counters this bug, but only for as long as the DOWN button is used - the volume keeps increasing.

This occurs with Rockbox Release 3.5 (not 3.4 as the Report Version field of the ticket says).

I installed release 3.3 on my Sansa e260. 3.2 worked. On 3.3, volume controls work fine in normal playback mode, but when I switch to FM Radio, they are ignored. If I switch back to normal playback mode, I can set the volume level again, just not while listening to the radio.

Some improvements for voicebox on windows. Mainly an option to voice file extensions. Not perfect yet. Instead of an option to voice file extensions there are two voice files options in the hta file. Anyone know what is wrong with this?
Thanks

General:
The trainer works with (three) cardboxes. Known cards will be moved from left to right to the next box, unknown to the first. You have finished the test if all cards are in the last box. The actual filling status of the boxes is graphically shown.

How the user handles the trainer during the test:
- a word is displayed
- the user thinks about the translation
- after pressing a button the solution is displayed
- the user decides by pressing the forward or backward button if he was right or wrong
- according the selection the card is shifted to the next box or to the first

Options:
- select vocabulary file
- reset (statistic) of vacabulary file
- change direction of inquiry
- display comment on/off
- colour settings

Vocabulary files:

The vocabulary is stored in files in the following format:
word1;word2;comment (optional)

Example:
lernen;to learn;verb

File format:
Maximum length of words:50
Maximum number of lines:500
File format: UTF-8

With r30907 (and also back to at least r30809 which I tested as well) I experience unneeded mass storage accesses on my iPod nano2G. I do not see this effect on my iPod Video.

Use case:
- Create a playlist from either DB or file browser
- Let buffering finish
- Skip forward track by track
(I use mpc/mp3/aac with embedded album art.)

Effect seen: For some skips I see short flash accesses (much shorter than full rebuffering).

This only happens if dircache is off. With activated dircache this effect is gone.

As such mass storage accesses are severely impacting the battery runtime on HDD targets I hope we get this figured out before v3.10.

When the dc jack is plugged in to charge while the player is not running (switched off), the display says ‘ATA Error -11’. It can’t be reset except by removing the batteries and dc jack. I ran an older build from last year and it works fine.

Hello! I made this patch to add a separate backlight setting for the viewer plugin. By default the viewer plugin use Rockbox global backlight setting. For battery life, the backlight length would be usually too short in viewer, since reading a page may take more than 10 seconds. Bring the backlight on again by pressing buttons or wheel could be painful since it may cause unwanted effects (e.g. scroll to top/bottom of the text).

I added two options: Use global setting (default) and Always on. When setting to "Use global setting", everything should remain the same as before. When setting to "Always on", the backlight should never dim off. Changing the option during reading will immediately applies effect. I use the helper functions "backlight_use_settings" and "backlight_force_on" to achieve this.

Warning: since I changed the preference struct, after installing the new viewer.rock, all previous viewer setting will be abandoned and revert to default settings. You can backup your old viewer.dat (36 bytes), wait the new viewer.dat (40 bytes) be generated, and overwrite the first 36 bytes from the old viewer.dat to restore the setting. I don't know if there is a painless way for the transition. Suggestions are welcomed.

Thank you!

Recipe:
1) Play an album. Wait until buffering completes.
2) Skip from track 1 to track 2. No buffering occurs.
3) Skip from track 2 to track 1. No buffering occurs.
4) In the playlist viewer, select track 2. Rebuffering occurs, even though the track is buffered.

The same problem occurs in the opposite direction (e.g. after step 2, it should be possible to switch to track 1 using the playlist viewer without rebuffering).

So, I have a Clip Zip at the moment. Been using rockbox on it since day 1, and since day one i've always had an issue: during playback, when accessing files from the SD card, the player randomly freezes. It's not always, it's not when accessing the same files or some specific characteristic shared by them, it just appears to be random. When it freezes, the LCD usually still responds to my commands (i can access menus, see the file info, even change song and it will display in the playback screen), but the actual playback doesn't, and I eventually have to hard reset it. I guess it's some kind of SD compatibility issues: I have an 8GB class 4 PNY. I know it's not the own card's problem since it worked perfectly on my Clip+ and does on my Android Cellphone.
I've been updating daily builds for this device at least once a week since I got it, and it happens with every build.

I primarily use my unit for audio books while driving, but the latest build (as I write this) won't play one of the files properly. It tries to start, stuck at 0:00. Trying to seek hangs the player altogether, requiring a hard restart.

I've recreated this problem on a flaky Clip+ and an AGPTek Rocker.

The 'file' tool identifies it as: ISO Media, MP4 v2 [ISO 14496-14]

Here's what mplayer has to say (while playing it back properly):

[lavf] stream 0: audio (aac), -aid 0, -alang eng

This patch removes any total tracks and total discs number from the track and disc number fields in ID3v2 tags, so that track and disc numbers are displayed consistently across different tagging formats.

What happens is that if a number larger than zero can be parsed from the start of the field, then the field is terminated on the first “/” char.

Added as a patch as I don’t know if this behavior is wanted.

This patch removes the Repeat:Shuffle setting, and always reshuffles the playlist when Shuffle is set to yes and Repeat is set to All.

The rationale behind this is that a user would rarely want to shuffle the playlist the first time only and always repeat the same sequence afterwards. Rather, one would either play the playlist in order and repeat in the same order, or shuffle the playlist first and always reshuffle.

Setting combinations affected:
- Shuffle:Yes && Repeat:All

before: shuffle the playlist but repeats the same sequence
after: shuffle the playlist and reshuffles when the end is reached

- Shuffle:Yes && Repeat:Shuffle

before: shuffle the playlist and reshuffles when the end is reached
after: this combination is replaced by Shuffle:Yes && Repeat:All

- Shuffle:No && Repeat:Shuffle

before: reshuffle when the end is reached
after: rarely used combination, not available anymore

All other combinations are not affected.

The patch contains some comment fixes and some code simplification as well. We also have to handle a special case in the patch.

Hi all.

I have found a funny thing, which should get fixed. In set_prescaled_volume there is this call:
audiohw_set_lineout_vol(tenthdb2master(0), tenthdb2master(0));

As far as I can see this call is not needed here. So this patch removes it, but as I own only a sansa e280 I can not test this change. I hope to commit this soon.

If this call is needed… do we need it every time audio changes or only once at init?

Thanks,
AustrianCOder

This attempts to implement the idea in http://forums.rockbox.org/index.php?topic=25169.0 this only works for the Settings menu in the main menu.

With this patch, if you reenter the Settings menu, it shows the menu shown when you leave the menu just like when you return to the browser or the database.

This bug currently exists as of rev 21444.

If settings are modified on the recording screen they aren't persistent after a reboot unless another setting is changed somewhere in the menu system.

The problem is that global_settings is being modified without a subsequent call to settings_save().

Attached is a fix for this problem. I've so far only tested it on the h1x0 simulator but I think it's a pretty benign change, unlikely to cause problems on other targets.

This is a patch meant for Clip+ that adds a “Reflection” setting to
allows choosing if to show a reflection or not. When no reflection is shown the images are moved to bottom of screen allowing for title at top and keeping them in the blue
will work for other devices. I tested it on Fuze v2 but others may have unknown problems related to screen size differences. For screens > 100 high it doesn’t move the albums
against r26185 in UISim
you want this as a patch against my pictureflow-wps integration patch let me know as I have one

Attached is a patch that:

* adds an option to chose the date format in the system menu (choice between YMD, DMY and MDY)
* adds a %cF theme tag so that theme can know in which order to display the date

There are a few new strings that I only added in English.

This is my very first rockbox patch so please let me know if anything should be improved.

I did the patch against svn 29827 and tested it in a simulated Fuze v2 as well as a real one.

(Made using r29635)

This plugin adds an Ohm's Law calculator feature to the resistor.c plugin. It takes two inputs, of either (voltage, resistance, current, power), but not both of the same time, it will then calculate the other two values.

installed rockbox and doom (freedoom) all correctly. but problem is that the navigation keys dont work when the game starts. cant move. but i can bring up pause menu by flicking hold on then off but then only up(menu button) works in addition to the center button being able to select

to reproduce:install latest build for ipod classic 5th gen 30gb
install doom from the rockbox utilities program
run doom in ipod
game loads
face at bottom of screen moves, showing it isnt frozen… cannot move

and yes i have tried configuring the keys, it doesnt work

I got no SD-Card support for my E-250 after boot into USB mode.
I plug in my powered off player into usb and only have access to internal storage.

If i plug in my player booted up there is no problem.

I am using daily build r29174-110131.

This is the game Squarebloxx. It works on Color-LCDs only because colors are an essential part of the game. I tested it in the Simulator for all the color Boxes. I also tested it on my H340.
In the game you have to mark parts of an array of tiles. If the tiles in the corners of the mark are the same color, the marked area is done. If all tiles are done the level is finished.
Please give me feedback and report bugs.

Thanks Krush

Patch changes controls for Doom:

Forward: rec/up
Left/Right: scrollwheel (it needs a lot of scrolls for large turns, but hopefully it can be modified to work better in the future)
Back: down
Shoot/Enter (menu): select
Change weapon: left
Open: right
Esc: power

While playing doom, I can definitely read the amount of ammo, shield status, and health of my character. However, I cannot read the messages like you need the key first to open this door. Also, if you set the screen size to the maximum and turn on the heads up display the font there is also illegible.

Hi all!
After 3.10 update I usually get my player frozen with usb plug icon if I connect it to any USB host while the player is off.
Steps to reproduce the issue:
1. Power off the iPod.
2. Plug it to Usb host. (tested with mac and Android)
3. Wait the system to boot.
4. It freezes with usb connect icon (no menu bar). Only holding Menu+Select help.

Thanks. Great firmware!

The ARM hardware debugger via JTAG spec (EmbeddedICE) specifies a sideband channel for target↔debugger communication called DCC (Debug Communications Channel). openocd, an open-source debugger compatible with the EmbeddedICE standard, supports using this channel for textual debug messages from the target.

The attached patch implements the target side of this channel. Messages can be enabled in openocd using the “target_request debugmsgs enable” command.

WARNING: If -DDEBUG is enabled and there is no hardware debugger attached to drain the DCC buffer, debug() becomes very slow because it has to wait for the writes to time out. However, this is unlikely to happen because -DDEBUG isn’t typically enabled for target builds.

Hello!
Not very long ago I got iPod Nano 2 gen 8gb, installed rockbox and encountered this strange behavior:

After pushing and releasing Hold button player doesn't react on wheel. When I'm trying to use some other button(Menu, for example), nothing happens. After third attempt to use a button Rockbox does button context properly, showing me what I wanted to see a few clicks ago. What happens with interface after using Hold? When I return to 'Now playing' screen throughout Menu, all works fine. But right after using Hold button I can't nor increase/decrease volume, neither move in a menu list.

This bug is sporatic “the worst kind”, has effected a 4gb fuze+ “foolsh in IRC” and an 8gb fuze+ “DmL in IRC“, but also has been confirmed to be absent from one other 4gb fuze+

Rockboy data aborts on menu key press, when the srceen is rotated left and image is stretched across the whole srceen. Also no matter what key is mapped to the menu entry it will still fail.

It never fails when aspect ratio is maintained with scale or when not scaled at all, and never aborts when rotated right or not at all.

Only four files even mention rotate in the apps/plugins/rockboy/ directory “lcd.c menu.c rockmacros.h and sys_rockbox.c”

Sometimes the failure does not happen and reaching the menu is possible, but the rockboy option file may get written and not allow the user back into the menu later to change the rotate option back. When this happens the option file must be edited or erased to make rockboy work again normally.

I tried to make the first shot on adding fm radio support for the Samsung YH-* devices.

–

Using r30284

Initialization of the database, from scratch, on the Fuze v2, using a fresh SVN build, fails when committing.

It scans all files, gets to committing 4/9, then hangs at “building database, N files found”.

If I reboot, it tries to commit on reboot, stops at 4/9, then boots into rockbox with no database (ie it asks me to initialize if I try to view it).

Attached are my database* files.

This is a bug in post-3.9 code, as I don’t have the problem with a 3.9 release.

Here’s a patch to have a functional usb_serial driver allowing the use of “Logf over Usb” debug function.

After upgrading my 1st generation iPod Nano from Rockbox 3.6 to 3.9 the cover art display does not seem to be working consistently.

When using a playlist the first track will always show the correct cover art, but any tracks after that will continue to show the first track's cover. This also happens if I skip forward or backward between tracks in the playlist.

If I manually select a file to play the correct cover will show, and if I manually select another track during the play-back of the first the cover art will change to the new track.

I have also tried this with current build r30334 (2011-08-20T13:14:30) with the same results.