Hardware: iriver H140, iriver H340, Sansa Clip+

Rockbox version: 3.10 downloaded from http://www.rockbox.org/download/byhand.cgi I have also reproduced bug on official firmwares as old as 3.5.1, and on my own builds.

Settings: 100% default except for enabling EQ and setting an EQ i.e. using graphical EQ to set LS -0.5 at 60Hz or LS +1.5 at 60Hz

Expected behaviour: music track, however loaded, starts in normal way, with no sounds other than those decoded from file. Restarting the track results in the same normal playback.

Actual behaviour: music track starts with an obvious and intrusive click. This happens whether the track is loaded individually, or if it is the first track of an album loaded via .m3u playlist. When using playlist subsequent tracks play normally, without a click. But restarting any track causes the click.

It makes no difference if the EQ Low Shelf Filter settings are a big change from flat, or a tiny difference. To induce the bug it’s enough that EQ is enabled and LS is not set to be flat i.e. just an increment of +/- 0.5 dB is enough, and changing the cut off frequency or the Q factor made no difference.

This bug is noticeable with any track that starts quietly, and especially with tracks from CDs that are not mastered to modern high levels.

The Clip does tend to make its own small click on manual track changes and some button presses; I am not confusing this with the bug I describe. On the irivers I get a single click, while on the Clip I get a very unmusical double click.

I’ve attached my H140 config to illustrate that the config is unremarkable and that apart from the EQ it is at default. If anyone needs me to try stuff or make any changes or try a patch that is fine, but I would prefer it to be on an iriver because the Sansa OF database refresh is so annoying.

Rockbox 3.1.3 on Clip+ (also iriver h140/340. also previous versions of rockbox).

Some HE-AAC files play back at half speed.

Example file info (comment/lyric fields removed as very long):

General
Complete name : Witness_-_The_Khmer_Rouge_take_power.m4a
Format : MPEG-4
Format profile : Apple audio with iTunes info
Codec ID : M4A
File size : 4.09 MiB
Duration : 9mn 0s
Overall bit rate mode : Constant
Overall bit rate : 63.5 Kbps
Album : Witness
Album/Performer : BBC Radio
Track name : The Khmer Rouge take power
Grouping : News
Performer : BBC World Service
Composer : BBC iPlayer
Genre : News
Recorded date : 2013-04-18T08:50:00+01:00
Tagged date : UTC 2013-04-18 09:07:25
Writing application : Lavf55.0.100

Audio
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : HE-AAC / LC
Codec ID : 40
Duration : 9mn 0s
Duration_LastFrame : -1ms
Bit rate mode : Constant
Bit rate : 62.7 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz / 24.0 KHz
Compression mode : Lossy
Stream size : 4.04 MiB (99%)

30 second sample attached (cut with ffmpeg, full metadata)

Forum report http://forums.rockbox.org/index.php/topic,43012.0.html

How I am able to reproduce this behaviour on my clipv2 using rockbox 3.10:

I select a file to play using the file browser and rockbox creates a curent playlist.
I save this playlist using the context menu and enter file browser again.
I select a file from any other folder for playing back, I get a “playlist buffer full” error message, that keeps flickering on the screen, when pressing any button.

I increased all file limits and also deleted the .playlists_control file to have it recreated again. The saved playlist consists of 30-40 mp3s.

Rockbox starts with remote, but doesn't respond to button presses except turning backlight on with build 6039eb05b-180313.
It works with deaeb73-161114 though.

This is a post that another user put in the forums that pretty much describes the problems I'm having exactly:

" I have a v1 sansa fuze and been using rockbox since 3.8.1 first came out.I just upgraded to 3.9,did not mess with a-n-y setting at all,pc is windows vista (latest sp).Whenever i drag and drop folders with mp3s in them(be it 58 mb or 300 mb or 600 mb) it starts to copy but halfway through,the process just freezes,clicking cancel freezes the windows explorer for 10 seconds then cancels it.Even worse,when i go check out my sansa fuze at my computer,it's recognized but when i click on it,shows as empty!? so i disconnect safely,theeeen….device needs a hard reset.So i say ok this has happened once or twice before but guess what? it happened again…5 TIMES each on 3 different usb ports.Uninstalled rockbox,went back to official firmware and it's all normal…

So i changed the screen to be always on during plugged in and this is the error i get

data abort at 30054264
FSR 0x8
( domain 0, fault 8 )
address 0xA00000BF "

I am running Windows 7 64-bit and experiencing the same issues. If the player doesn't lock outright, it gives the same error white screen described above. This seems to happen more frequently when copying folders that contain folders themselves, but I've had the problem occur on copying just one folder with no subfolders.

Pressing the remote volume UP key on my iriver 140 in wps sometimes results in directory skip.
This is not easy to reproduce, but I was able to repeat once that problem in conditions where I'm sure that the directory skip key wasn't pressed.

I don't know if it's a hardware related problem, but I've read somewhere about another user having the same problem.

Tracks played via a cuesheet are not recorded in .scrobbler Last.fm log.

I have just now installed the latest stable version of rockbox (that would be 3.0) on an iriver h340. Unfortunately, it’s unusable at the moment due to some serious screen corruption. It sort of looks like this picture: http://img54.imageshack.us/img54/2263/iriver3qs.jpg, but is so much worse that it’s impossible to navigate the menus. If I wait for the backlight to go off, and then press a button, the screen looks fine until I start navigating, at which point the corruption resurfaces.

I’m really excited about rockbox, but this bug is a showstopper for me at the moment.

Thanks for looking into it!

Regards.

Heyup,

I’ve recently updated the build on my zip and the radio volume is greatly reduced. It`s very noticeable since I use a passive speaker connected straight to the player (top volume required). Volume of file playback is unaffected.

Here’s someone describing the same issue-
http://www.anythingbutipod.com/forum/showthread.php?t=74910

Same symptoms including (notably) normal volume in the recording screen (gain=0), and region settings make no difference.

I have no note of which build I had before the update but it was from around the end of 2014. Looking thru the changelog yielded no clues.

trunk 983c808-150717

I recognize some problem with USB support.

When I’m connecting my player first time, it’s work correct - computer’s mounting device propertly. BUT When I disconnecting it, turn on playing and while music is still playing I’m connecting player once more - Rockbox is crashing and give information about “unidentified instruction at… “. Now player looks like dead - I must reset it and Rockbox start correctly.
When I’m not turning on songs - all works fine.

Sorry for my english…I’m still learining It

When my Fuze+ is charged and it's still connected to the charger, it seems it keeps toggling between charging and discharging.

I think the problem is that it reacts to some voltage to stop charging. When it's charging it measures up to 4.35 V. But when it stops charging it changes to 4.25V, and says something like 96-99% charged, and which point it changes to charging again, and so on.

So it's basicly toggling between charging and discharging very often, and I don't think that's very good for the battery. Once it's charged it should stop charging as long as the charger is connected. (This might apply to other devices too.)

This was with version 2ef7a54-130111

Kurt

I have some stereo files that need to be encoded as two independent channels with no lossy stereo coupling. I encode these files by passing "–uncoupled" to the Opus encoder, e.g.

opusenc –bitrate 64 –framesize 60 –uncoupled example.wav example.opus

The lossless flac version of a sample of such a file prior to encoding can be downloaded from
http://kyle.tk/binaural-beat-sample.flac

If I do not pass the "–uncoupled" option to the encoder, the resulting Opus file plays with no trouble on my Sansa Clip+. The sample of this encoding is at
http://kyle.tk/binaural-beat-sample-64k.opus However, if I pass the "–uncoupled" option, sample at
http://kyle.tk/binaural-beat-sample-64k-uncoupled.opus Rockbox only plays a cacophony of chirps, scratches, squeaks and garbled noise, and no hint of the original sound is detectable.

Note: I have only been able to test this on a Clip+, as I own no other Rockbox player that is capable of playing Opus files at this time. Hopefully someone can confirm this problem on other targets, but for now, I have been able to reproduce it 100% on the Clip+, and I can confidently point to "–uncoupled" as the encoder option that results in an unplayable file.

Starting from the daily build from mid August (can’t exactly say when, because I don’t play MIDIs so often), the MIDI playback on my iPod 5G 30GB sounds distorted, especially the Piano sample.

It sounds as if the higher frequencies are chopped of and instead replaced by “alias frequencies”. Maybe something has been messed up in the mixing routine concerning decimation filter / interpolation.

I am using the original patchset provided here at rockbox.org.

Maybe somebody could check this - thank you!

Keep up the great work!

1. tested devices: Samsung Galaxy Tab 7" and Android 2.3.3 AVD
2. tested revision: custom r30556 and rasher's unmodified r30562

3. condition: goto home screen by pressing 'Home button', then return to rockbox

4. symptom : any action that calls yesno screen(rename, delete, or 'Erase dynamic playlist', etc) will make rockbox unresponsible.
The only thing I can do is go to home screen then kill rockbox service.

5. If I go to home screen from main menu by 'Back button', the problem doesn't occur.

Rockbox Info: Version: 3.12

Device: iRiver H140, 80GB Toshiba MK8009GAH 8mm 1.8" IDE HDD 8mm

BUG: Repeatable, Consistent.

Additional Information:
1. To verify that I had a good installation of the 3.12 version of the Rockbox firmware working, I have reformatted, and re-flashed rockbox 3.12 two seperate times after initially encountering this, duplicating this behavior. So it doesn't seem to be a bad firmware flash.

Expected Behavior:

1. Player should Power On and boot properly every single time the bootup sequence is initiated correctly (Play Button pressed when Player is in a Powered Off state).

Buggy Behavior:

1. Player Powers Up, then locks up (i.e. "crashes") during bootloader sequence, requiring a hard reset, and upon second boot, finally Powers On and boots properly, bringing up a functional session of the Main User Interface. This is repeatable, and consistent.

Bug Symptoms & How To Repeat:

1. Consistently the Player will lock up during first "boot" sequence. The bootloader will usually reach the text stage, and sometimes crash here. Sometimes the bootloader will get through the text stage and reach the Rockbox Logo and then crash here. The Main User Interface is never reached upon first "boot" sequence.

2. The result of the first "boot" lockup (i.e. "crash") requires that I reset the Player by inserting a paperclip into the Reset hole (on the bottom plate of the Player) and triggering the button hidden in there. This Powers Down the Player, and Resets the Firmware, leaving the Player ready to be Powered On again.

3. Upon the second "boot", the Player will "boot" and the bootloader will make it past the text stage, the Rockbox Logo stage, and then spin up the HDD properly; the bootloader will not lock up the firmware, and behaves 'normally', finally resulting in a completed boot up sequence with the Main User Interface coming up (as a user would expect). The Player is now ready to use.

Version: r28861
Used before: r26706

Hello,

with r28861the touchscreen works with glitches.
When I touch a line-item , the system sometimes don't react or the line selector just "twinkle".

My conjecture:
It has somethin to do with the new "kinetic-scroll"-feature, because after a little kinetic-scroll the touch become precise.

(And yes, I've done a calibration: no effect)

On build 30622 and previous builds, there is an issue with resuming playback.

When "Resume Playback" is selected from the menu, you transition into the music control screen but there is no output aside from some crackling noises.

Occasionally, the song would play for half a second before silencing.

The play/pause button during this situation shows a pause symbol which suggests that the song is supposed to play. However, the song progress bar remains at 0:00.

Currently on Cyanogenmod 7.1 nightly, Android version 2.3.5.

On Gogear sa9200, when hold is switched to off(means in the middle), the play stops.
Maybe because the hold and the on/off share the same swtich.

Dear Rockbox, long story short after doing update to the latest daily build c6d5cd7(2017-09-11), after playing music for around 30-40 minutes the screen start to freeze cannot scroll or select anything on the screen even turn it off is not possible but after few seconds it turn off by itself and can be turn on normally after that.

If loading a config file that holds all configuration settings (Settings → Manage Settings - Save .cfg File) from Rockbox 3.9.1 in Rockbox 3.10 or the daily builds for Archos Recorder with Firmware V3, the player will not bootup correctly on the next restart and show:

I 4: IllInstr

directly at booting. I then press "On" again and get:

*PANIC*
Stkov main

and the HD shuts down. If I press "On" again, the same loop continues.

The problem can only be resolved by plugging the player to USB, removing the rockbox directory and copying it again from the newest daily build or 3.10, then restart. It boots up fine again then. Doing the previous settings manually on 3.10 or the daily builds and then saving / loading them works fine and the player won´t have the boot-bug anymore.

I have attached the config file that creates the problem.

Rockbox versions: all from 3.7 to 3.12

There are really loud and annoying digital squeaks during playback on some tracks only (wma 64-96kbps). Usually the noise occurs when one channel is silent or almost. The problem doesn't occur with the OF. It makes no difference where the song is stored (sd or internal memory). The same tracks play fine on the pc. I attach a portion of a song I've recorded while playing on the device where the noise can be clearly heard.

Hi,
I’m trying to record myself playing the guitar using my old, trusty FuzeV2 (both a very old version - sorry didn’t wrote it down but had to be at least a couple of years ago - and today’s version 87229a4). Recording parameters as follows:

Trigger: Repeat
TrigType: New file
Prerecord Time: 1s
Start Above: -22dB
for at least: 1s
Stop Below: -26dB
for at least: 1s
Presplit Gap: 1s (don’t really understand what it does from the manual, but it says it usually has to be the same value of the Stop Below Time, so…)

Recording starts correctly when noise is detected according to conditions; then apparently it correctly detects the silence and stops the recording. But immediately the ‘Repeat Trigger’ parameter kicks in and _immediately starts a new recording_. At this point, the trigger status and the recording status aren’t matching anymore. The recording screen shows the recording file size growing, but the Trigger status is ‘Ready’. I have confirmed that on the actual file on disk the silence is meanwhile recorded.

Did I understand any of the parameters wrong or has anybody else the same problem?

Both issues seem to appear with any version of my theme and with any build.
Let's try it with the latest version 1.30 of my theme (in attachment but also here: http://themes.rockbox.org/index.php?themeid=1585 ) and a recent build (I use version: 0c4bd3a-120406)

-Theme loading

When you load the theme for the 1st time, the WPS will never load properly (failsafe). The workaround is to turn off the device and turn it on again and then the WPS will always load properly until you reload the theme for some reasons (trying another theme and revert back to mine etc).
I tried both with the full theme version and this "light" version of WPS: http://pastie.org/3747546

-USB connection (tested on Windows 7, with or without a microSD, and there isn't such an issue with the other themes)

If I plug the USB cable while the player is on or off, it will almost never mount properly.
Usually the USB screen appears on my SBS, the computer recognizes a USB device is connected but either nothing appears in "my computer" or the device appears but is not accessible. When I unplug the USB cable, the Zip gets stuck on the USB screen and only reset can turn it off.
Sometimes it even displays some erros like that when plugging the USB cable: "data abort at 30FSR 0x8 (domain 0, fault address 0x964176 bt pc: 0x3006AC3 bt end" , sometimes it doesn't display the USB on SBS but gets stuck on the main menu.
And rarely in the same conditions it also mounts properly…

Like for WPS, I made a "light" version of SBS without the status bar and that way the Zip seems to mount and unmout properly every time!
http://pastie.org/private/cauhxelaip7hrpqpcwdbxw So maybe a tag in the status bar causes the issue with USB connection?

I noticed various RDS-related issues on my Clip Zip and Samsung R0

1) Sansa Clip Zip
With the latest builds (for example version 341e2c4-120929) I noticed the RDS text just behaves crazy, like blinking for no reason and displaying strange characters. Besides, the RDS name won't display most of time or at least needs much time to display.
When reverting back to an older build (0c4bd3a-120406 for example), the RDS name displays quickly and for all stations now and the RDS text is just displaying and scrolling normally.
Tested and noticed with my theme lebellium Samsung -like: http://themes.rockbox.org/index.php?themeid=1681 and with the various DFKT Minimum Zip themes (this one for example: http://themes.rockbox.org/index.php?themeid=1539 )
screenshots of the issue: http://imageshack.us/a/img855/8724/dump120926124155.png http://imageshack.us/a/img837/2154/dump120926124439.png

2) Samsung YP-R0
In addition to the RDS issues reported for the Zip above that also exist on the R0, it seems that the RDS text makes the device crash after a few seconds or minutes with my theme lebellium Samsung-like (version 1.60 beta to download in attachment).
I found 2 unsatisfying ways to bypass this annoying crash:
-Remove the %s scrolling tag for the RDS text, that is to say replace "%s%ac%tz" by "%ac%tz". But that's not a good solution since then the RDS text is cut off. The %tz tag only makes sense when associated with a %s tag and all other themes supporting RDS use it and work well that way.
-Replace the RDS text font (currently 20-DroidSans-Bold.fnt) by another font from the Rockbox Font Pack. As I want a nice anti-aliased font, the only acceptable alternative I found is the Ubuntu Bold font. But this font makes the device crash too…

So I just hope there is a bug somewhere that can be fixed?

With my theme “lebellium Samsung-like” for Clip Zip there are some display issues in FMS, more precisely the status bar, while the code is the same as in WPS and SBS. See the pics in attachment.

How it should look like instead:
http://themes.rockbox.org/themes/96x96/lebellium_samsung-like_%28big_aa%29_96x96_v1.00/3-FM_radio_bigAA.png http://themes.rockbox.org/themes/96x96/lebellium_samsung-like_96x96_v1.45/2-FM_radio3.png

After bisecting, I found out that the 1st bad commit is acf3af4 by JdGordon: radio: fix  FS#12747  http://git.rockbox.org/?p=rockbox.git;a=commit;h=acf3af4

There is an ALAC playback problem in daily builds (since 2014-11). The playback somethimes works for one song but then crashes and shows ALAC file details as "? kbit/s", "0 MHz", "0 MB" and nothing happens when I press the Play button. After reboot the problem occurs again. It makes the ALAC playback impossible.

Now I'm using revision 9cb9f76M-140326 with patches from aroldan:

https://www.dropbox.com/sh/b5xbw6cp4ikfxwn/MjELjmDNJ_

With this build there are no ALAC playback problems.

Bug exists in the DEV builds for, at least, Sansa Clip+, Sansa Fuze+, and iPod Video for at least a year, although I cannot confirm this as I've only just now tracked down the problem. The issue was discovered because imagemagick occasionally selects 1x2,1x2,1x2 as the chroma sampling factor when converting an image.

To recreate this bug, convert any image using imagemagick to a JPEG with that chroma sampling factor and attempt to view it in Rockbox. What you will see is a nonsensical image to the size of the original JPEG. Any desktop image viewer, like eyeofgnome, renders the picture correctly.

I've also included a sample Rockbox logo generated in the faulty fashion along with this bug. To create it, run this command in a Unix-like with imagemagick and curl installed: 'curl -J -L "https://www.rockbox.org/rockbox400.png" | convert - -sampling-factor 1x2,1x2,1x2 -quality 100 folder.jpg'

Unsure if this is an RBUtil isssue or a sansapatcher issue, or even a Sansa issue that can’t be solved, but according to this (http://www.rockbox.org/irc/log-20080709#02:36:38), it reports a successful install on the e200R when it hasn’t. Related to  FS#7526 ?

(./version.tex)) [2] [3]
1.

Class scrreprt Warning: \float@addtolists
You should use the features of package
instead of
Support for \float@addtolists may be removed
`scrreprt’ soon .

This is the warning text I get. We should probably update the syntax before it get broken.

Pure i20 does not charge the iPod classic with OS rockbox.
I feel like Rockbox can not recognize interface pure i20 (drivers?)
Through Pure i20 will not play music even if it is in the installed Rockbox in the iPod.(only apple Flash = possible charging/playing via Pure i20)

I own Ipod classic 6G 160GB (flashed rockbox)

Hello.

I found that bookmarks which was automaticaly created (by the function Bookmark on Stop with set to Ask) from tagcache don’t work. Problem is in missing path to file in bmark file. I made more test and now I attach bmark where first line/bookmark is from tagcache and second line/bookmark is from files browser.
Both are on approximately same time.

I testted on Sansa c250 and Sansa Fuse2 with Rockbox r27481-100718.

Can anybody from developers focused on it, please.

Much more thanks.
Salaba

Hello.

Can you somebody add some info about using talkclip for shortcuts.txt
in manual section 5.14 Shortcuts.

I'd recommend replace this

 "talkclip: <filename clip of a talk that speak When voice menus are enabled>"

for this

"talkclip: <filename clip with full path of a talk that speak When voice menus are enabled
 (example /.rockbox/filename.talk)>"

I suggest this because I took a long time before I figured out how it should be properly.

When the option “Auto-change directory” is enabled, my Ondio crashes at the end of the current folder’s playlist when it would have to create a new one.

The error it shows is “I09: CPUAdrEr at 09010FF8”. The address varies a bit with the actual revision, this example is with r26246 and an OndioFM backlight build (but the problem is present in plain SVN builds too). Looking at the map file shows that the crash happens in the cue_find_current_track function.

Bisecting build turned up that the error was introduced with the cuesheet rework in r21978/9 and the fix in 21982 fixed usual folder playback but not auto-change directory. It is reproducible on the Archos Recorder so I assume a general hwcodec problem.

This bug already stands for a while and was reported in IRC but since nothing happened so far, I’m going to report it here.

On targets with early USB (”usual” looking USB screen when plugging from off-state and probably only hardware bridge USB) the statusbar that should be there in the screen is missing and when you disconnect the player so that the “rest” of Rockbox would start, it crashes.

The address where the crash happens with the build currently flashed to my Ondio is in “lib/libskin_parser.a(skin_parser.o)” - more exactly “9035954: 8b fb bf 903594e <_skin_parse+0×152>”. I pastebinned the complete disassembly of the _skin_parse function here: http://pastebin.com/LZMNW96a .

I will also try to find the exact revision that introduced the bug but that’ll take a while. If I remember correctly it came with some statusbar skinning commit which is already a while ago now and crept up twice in a row (first was fixed, then it came back). Plus it is not the easiest and no quick task testing flashed builds on the Ondio….

Creative ZEN
Daily build: rockbox-creativezen-20170112

Bug description:
When plugging any dummy plastic or a non supported SD card, the device freezes and displays a white screen with a “PANIC” error message.
Plugging a standard SD card works fine.
To restore the system, you have to use a paper clip to do a hardware reset and turn the device on again.

Holding the Pause button (to move/paint down) will shut down rockbox.

This shutdown combination should be disabled for Rockpaint!

While I’m at it (and you can put this in a different Flyspray if you want), I suggest that we make use of the iPod scrollwheel somehow in Rockpaint, maybe to change the size or shape of the brush or something and/or in the menus.

I would also like to be able to set the colour of the background to start with.

After playing a few opus files (~128 kbps) the system becomes so unresponsive that it cannot decode the file in real time, and the device cannot respond to any input within a reasonable timeframe (have to hard power off).

This does not occur when you set the cpu frequency beyond the highest setting in the debug menu!

To reproduce:
play opus files in a playlist with normal cpu scaling
on beginning of 2nd or 3rd file, system will become unresponsive.

When using an image in a theme it shows ugly gradients/dithering, as if it was only 16 bit. When the same image however is used as backdrop (%X tag, instead of ‘regular’ %xl and %xd), it looks smooth and 24 bit.

Attached image shows the issue. Top half shows what Rockbox does when the image is loaded via %xl and %xd. Bottom half shows how the image should look like (and how it does indeed look when it’s used as a %X backdrop).

Tested on a Cowon D2 simulator and on an Android device running RaaA.

Hi,

I’m experiencing an issue with WMA Pro playback on my Clip Zip.

I’ve got the lastest stable build of Rockbox 3.13. Files were encoded with dbpoweramp.

Some files playback normally, but majority of tracks skips. Always at the same point if not forwarding or rewinding.

Here’s a sample. The track skips at 2.15.

Whenever the HOLD switch is turned off, the hold icon in rockbox disappears, but hold actually doesn’t let go. I can’t use any keys until scroling is used. Scrolling left or right is the only thing that actually switches off hold. It can be pretty annoying as I use HOLD a lot.

I am having a couple of problems with Rockbox on my iRiver H140.
The first issue is that all my songs in the files folder are displaying only in the order
that they were uploaded onto the machine. If I go into the settings and choose to display
Artists in alphabetical order it doesn't have any effect! I am left to endlessly scroll through
the names or listen through the iriver player which doesn't play WAVs or FLACs so i can't access everything.
Secondly, if I start up and resume playback of an album it doesn't then allow me to access the files folder when I navigate to it. I have to then restart my player and go to files from there. If I later come out to the main menu and choose Files, or any folder for that matter, it won't open. It's really frustrating. Any ideas of a fix?

This is a reopening of issue  FS#7354  (quoted below) related to playback problems involving cuesheet support and flac files (labelled #1 in the original post). Jumps to certain positions in flac file according to the cuesheet fail consistently.

The bug is extensivelly described in the original report and can be easily reproduced in current versions. I reproduced it in many situations with the following configuration:

Equipment used: Cowon D2 and Cowon D2 simulation
Rockbox version: tested on r25508-100407 and r24777-100219 (simulation)
Rockbox settings: Cuesheet support ON, other on default
FLAC files: Ripped form my original CDs with EAC (to WAV and cuesheet) in secure mode and processed with FLAC 1.12 and/or 1.14 compression level 8. MD5 checksums on cuesheets and FLACS checked. Cuesheet syntax OK, cuesheet file encoding UTF8-DOS and/or DOS. Works properly my on computer.

Quote of the original post

Hi there,

  this is another WIP plugin that I wrote last year.  It plays videogame streamed music
  using the UADE library.  Original homepage here: sourceforge.net/projects/vgmstream/

  I'm a bit new to git so please forgive me for not uploading a proper patch.

  To test the plugin, simply copy the rockstream folder to the plugins folder in
  rockbox sources.  And you have to extract the data.zip file in the .rockbox folder.

  The formats.db found in data.zip is basically a list with all vgmstream supported
  extensions (at least "all" by the time I wrote the plugin).  You can add  or remove 
  new or unwanted extensions there.  The plugin will only handle the extensions found
  in the formats.db.

  Currently the plugin works as a viewer plugin, and there is only one extension associated
  with the plugin in viewers.config for testing purposes, but you can always use the 
  'open with' option from rockbox.  Once you open a file the plugin will parse all supported
  files found in the same folder.

  The vgmstream project is updated quite often, if someone wants to
  update the core library, I believe that would be very easy, since I only changed a couple
  of things to it.

  I'm not going to work on this anymore, so I decided to upload it here, and hope someone
  can make a proper patch and maybe some dev would be interested in testing it, make 
  the necessary changes and upload an stable release.

  As a last comment, I have only tested the plugin in the simulator, samsungypr0, fuze+
  and ipod nano. It only worked in the simulator and samsungypr0, so hope someone can 
  fix that.

  Please read the README file for some additional info about the plugin.

  Working on:  simulator and samsungypr0
  Commid ID: e1ea08417bca57c607df6686472fa0a86f38b6d1

When the battery is nearly empty and the iriver H10 is about to shutdown, the volume sometimes suddenly increases progressively, as if the volume UP button was pressed and held down, all the way up to the maximum.

This has happened to me about 3-4 times so far. Pressing the volume DOWN button somewhat counters this bug, but only for as long as the DOWN button is used - the volume keeps increasing.

This occurs with Rockbox Release 3.5 (not 3.4 as the Report Version field of the ticket says).

The FM Tuner appears to be very sensitive to noise and static compared to the original firmware radio.

Apart from the static and noise the Rockbox FM Tuner sounds much clearer and sharper than the original firmware, so I wonder if this may be related to the OF using a lower sampling rate or cutting off the higher frequencies to reduce noise.

Hello,

i think rockbox is very nice. I use ist for several years.

Now i found a bug:
The Car Adapter Mode or rather the power-off does not work in the Radio-Mode.
I tested it with the versions 3.4 and 3.10.

This is actually release 3.5.1

I have quite a few low bitrate .wma audio files that play fine in the original firmware, play fine in VLC, but skip, stutter, and hiss in Rockbox.

The file is 20kbps, 22 kHz, mono, Windows Media Audio V2.

I have attached a sample cut from a larger file. Like the original files, it plays fine in the original firmware and in VLC.

This may be all players; I have only had experience with the Sansa Clip+ and Clip Zip. On version 3.13 the Automatic Resume feature works inconsistently, especially on the 2nd+ file of a playlist.

In version 3.11.2, the feature worked correctly on my Clip+. If I paused the player and the player turned off due to the timeout, when I turned the player back on and pressed the “Home” button or “Resume Playback”, the entire playlist would be back in place and playback would resume at the spot I paused. If I was 30 seconds into the third file in a playlist, playback would resume at that point. When that file finished, the next file in the playlist would start. Pressing “Previous” or “Next” would play the previous or next file in the playlist.

In version 3.13, this feature does not always work correctly. In fact, it rarely works correctly when playing a file that is not the first file in a playlist. Some times it works fine. Most times when I try to resume playback, it instead plays the beginning of the first track in the playlist. Some times when that happens, if I manually navigate to the track I was in when I paused, it will resume that track from the correct position rather than starting it over from the beginning.

This behavior is seriously agitating. I use my player to listen to multi-hour podcasts broken into separate files for each hour. If I get a phone call and pause my player I expect my player to automatically shut itself off after a few minutes, and it does. When I start the player again, I want to be able to pick up just where I left off. On versions prior to this, I could. In 3.13 it does not work 9 out of 10 times.

r29445 introduced problems with screendump on sansa e200 and e200v2 (and possibly more). Screendump works properly with r29444.

Steps to reproduce:

1. delete or backup existing .rockbox directory
2. install r29445 (or later)
3. reboot
4. navigate to System → Debug (Keep Out!) → Screendump and press select to enable
5. attach USB cable to trigger screendump

On e200, this results in:
*PANIC*
Stkov usb (0)

on e200v2, this results in a deadlock - no keypad response - backlight & button light never timeout. Upon reboot, multiple dump files exist.

On e200v2 only, when dircache is disabled, screendump will function properly.

Since r30937, the e200v2 bootloader is too large and mkamsboot errors with:

[ERR] Packed data (120926 bytes) doesn't fit in the firmware (120860 bytes)

Steps to reproduce:
1. build e200v2 bootloader
2. cd to rbutil/mkamsboot
3. run make to create the mkamsboot utility
4. run mkamsboot <path-to-e200pa.bin> <path-to-bootloader-e200v2.sansa> <path-to-output.bin>