Rockbox

When I play non-protected WMA files of 32 - 64 kbps and 44khz which have been ripped without changing anything from video on my Clip+ I get a garbled sound. I hear bits of sound all mixed up. This was true w/ 3.81 firmware and now w/ 3.9. The unexpected thing is that they all play normally w/ the Sansa firmware(Sansa firmware's volume is too soft for my taste Roll Eyes).

Player Type = Sansa Clip+ (not available in chooser when submitting).
Release = 3.11.2

Recording at 48kHz results in audio that is 2.35% too fast. I believe it is recording at 49155Hz instead of 48000Hz. Recording at 44.1 kHz does not have this problem.

I have verified by putting 2 identical Clip+ in front of me, one set to rec at 44.1 other at 48.0. When playing back audio (on PC) difference in pitch is (barely) audible. And the audio falls out of sync as recording progresses (in video editor).

For now I’ll be happy to only record at 44.1kHz, but maybe 48kHz recording should either be fixed or dropped from Clip+ options.

When playing FLAC audio tracks, they are no longer playing gapless. There seems to be about a half second gap between tracks.

iPod Video 5G
Rockbox 3.11.2 / r21506
Bootloader 2010-05-25T22:02:55

Issue is present even when using default theme and font; Docked or not docked.

I tried increasing the buffer and that had no affect.

Problem found in versions r29044-110113 to r29143-110126. I could not test 3.7.1, because it did not recognize my 16 GB Transcend flash card (fixed in above versions).

At the beginning of tracks and during rebuffering of longer tracks there is a short humming sound (like a bumblebee) mixed with a fast sequence of random high frequency tones. The sound differs as a function of data format and content. It is very homogeneous with WAV tracks (only humming) and different with lossy and lossless codecs. The same file encoded with FLAC and AAC leads to different short distortions. It is only audible for tracks with initial silence or very dynamic content, for example classical music with quiet passages or audio books. With sensitive headphones, this can be quite annoying.

The original firmware does not show this behavior!

It only happens while reading from the SD card, not from the internal storage.

Initially I thought this might be a CPU throttling issue. But now I think it might also be related to the controller driver.

There is a thread on Hydrogenaudio with independent confirmations of the issue:

http://www.hydrogenaudio.org/forums/index.php?showtopic=86306

If I can provide any additional information to help, please let me know.

Key lock (activated by pressing Power in the WPS) deactivates when music playback stops (end of playlist). The keypad then becomes active again. It shouldn’t get activated until Power is pressed again.

When displaying %mp in a theme while playback is stopped, the value 0 (zero) is displayed.

However, to test for “playback stopped”, one has to test:
%?if(%mp, =, 1)
That is, one has to test for (index + 1) in order to return true for any given enumerator index number.

Same problem when testing for an arbitrary number. Example:
%?if(%ss(0, 2, %St(font), number), =, 15)
returns true when the font is set to “14-Nimbus”, and false when the font is set to “15-Adobe-Helvetica”.

When testing a %tag that holds a numerical value though, it works as expected:
%?if(%pv, =, 0)
returns true when volume is set to 0dB.

Fixing this would likely break all existing Rockbox themes. One solution to this, would be to require new / updated themes to include some specific code that “acknowledges” the new behavior.

After setting the “Charge During USB Connection” Rockbox setting to “no”, the battery in my iPod Classic still gets charged whenever connecting the iPod to my PC via USB. From the iPod Video manual:

“This option lets you control whether the player should charge during the USB connection and hence draw the full 500 mA. Turning it Off is recommended if the player is connected through an unpowered USB hub or a laptop port.”

I would expect the battery NOT to get charged. Running Rockbox dev build 9576134.

Consider the following theme markup:

%Vl(progressbar,306,156,10,80,-)
%pb(0,0,10,80,progressbar.bmp,vertical)

That draws a vertical progress bar that will get filled from bottom to top. When a song starts to play, the progress bar is one pixel high, at the correct position (at the bottom of the viewport). That 1px-high image quickly jumps up one pixel (moves up by one pixel), then comes back down one pixel (at the correct position) whenever the progress percentage is high enough. The progress bar then displays normally and grows as the song is playing. See attached screenshots.

Expected behavior: the position of the progress bar (relative to the viewport) should not change. The bug has been observed in the iPod Classic and Clip Zip sims (builds 1bc89bd and 77bfff5) as well on the actual devices. Inverting the progress bar (with the "invert" parameter) shows the correct behavior (inverted bar with no such glitch).

Affected themes: Ash (iPod Classic), SugarBrown (Clip Zip).

In my sansa Fuze v2 build 28208 when I insert some album to the playlist and after that I insert another album to the playlist I got this error massege:

Data abort
at 3001AE90
FSR 0x8
(domain 0, fault 8)
address 0xB0166244

thanks!

It's Seems to be no support for RTL languages like Hebrew and Arabic in rockbox for android.
Instead of מוסיקה written הקיסומ (in English - Instead of "Music" written "cisuM).
I attach pictures for example:

It would be nice to be able to change volume while using the stopwatch plugin. If I don’t have the volume perfectly adjusted when starting my jogging round, I have to choose between running the rest of my laps with too low/high volume or discarding my times to change it, as the scroll wheel doesn’t have any function in the plugin.

Hi,
There is a problem in the Chinese voicing. It says "number, bai fen ji" (number %), but it's supposed to say "bai fen ji number) (% #). I don't know if it happens in text because I'm blind. Could this be fixed?

The MENU key is mapped to close the Chip8 emulator, so mapping it to a Chip8 key is pointless. This makes some games unplayable.
This may affect other iPod models, I don’t know.

As the title suggests, fun things like: https://plus.google.com/102855057878446061693/posts/FkQ4wQZb8VD can happen in this instance.

Initially reported here: http://www.rockbox.org/irc/log-20130113#07:14:49

[Saint]

Seems pretty self-explanatory

This adds the translatable string LANG_DISC for display in WPS themes. E.g. a theme could use the following to show “Disc 2” for a multidisc album:

%?ik<%Sx|Disc| %ik|>

Disc is a 4 or 5 letter word in most languages, so it won’t add much clutter in themes which would like to make use of this. A comparable example is the “Next:” (LANG_NEXT) which is used when displaying the next track in a playlist.

The scrollpad on the H10 (20gb, not sure about 5/10gb) has always bothered me with being jumpy, inaccurate, and unintuitive. At the moment (in rockbox) it seems as though it is working as a simple two button device (up/down), with no real dragging capabilities. I am wondering if this is a limitation of the hardware or current software implementation.

The original firmware seemed to work as follows:
split slider into upper and lower field. Tapping in either upper or lower half would create click-type event for up/down. Dragging in upper half would produce scroll up, draggin in lower half would produce scroll down events. The problem was that upper and lower halves are really kinda arbitrary and not easily distinguishable.

What I think would work nicely:
Tapping top and bottom, as before. Remove upper and lower restrictions for dragging, i.e. if dragging down (anywhere on the scrollpad) create scroll down event, if dragging up (again, anywhere) create scroll up event. Drag and hold will scroll in desired direction proportional to the drag speed (as in pushing a puck on ice). Hold (just hold, no tap or drag) on the touchpad creates a sliding value that can be used as a coordinate for different types of continuous input.

To implement this, we’d need some kind of knowledge about what signals the actual hardware provides, what resolution the pad has, i.e. what the physical and logical implementations of the device are. I am not sure how the Ipod scrollwheel works, but it seems that some of that code could be re-purposed, maybe?

After updating Rockbox from 3.10 to 3.11.2 on my Ipod Nano 1g i noticed the robotfindskitten game did not work as it should anymore. When robot has touched the first object, the text on the top does not change anymore when touching more objects until he finds kitten. The kitten animation also is hidden behind the text of the first object and the scrolling of the text starts at the end, not at the beginning.
I think it worked fine in 3.10, or at least in 3.9.

Please investigate this problem.
Thanks,
Hugo

Every time I try to set my theme to ThinBasic in Rockbox 3.11.2 on my nano 1g, a panic occurs.
I only tried this in 3.11.2 so I'm not sure if older versions have this problem too.

When a WPS defines a touch area combining %T and setting_inc or setting_dec, although the themesite parser does not show any problems and allows the theme to be loaded normally, the themesite doesn't display the theme. Some examples to be found in this forums thread : http://forums.rockbox.org/index.php?topic=25098.msg173725#msg173725

This patch implement alternative hold mode, mentioned in FS#10698.
To enter this mode you must:
1) switch hold button to on position(this results in normal hold mode).
2) press menu button.
3) switch hold button to off position
4) release menu button
To leave alternative model:
1) switch hold button to off position
2) press menu button
3)switch hold button to on position
4)release menu button(now you in normal hold mode)

Additionally I implement simple keymap which working only in wps contex:
if hold button off:

 Plus button increase volume

When utilizing the database on the iPod Photo (as well as other 4G iPods I have used), on occasion when entering a directory or going to the parent directory, any button on the iPod will need to be pressed before the others will have effect. I.E. before I can scroll to select a song, I must press Select or one of the other wheel buttons. It is severely annoying, in part because it is too sporadic to even be assumed to be a “feature”.

First noticed the issue in the previous dev build, and just confirmed in 15fa7f8.

When playing .opus files, no metadata is displayed. Some files (92kbit stereo music files so far) do play fine otherwise. Others induce crashes upon attempting to play. An example is attached.

First test, I played a couple of music files successfully, then tried to play the attached file. System crashed immediately showing the following:
“Undefined instruction
pc:30000002 sp:300632[display cuts off here]
bt end”

Powered off, restarted, and tried to play the attached file immediately. After a second or so of audio, player crashed again:
“Undefined instruction
pc:08180002 sp:302029[display cuts off here]
bt end”

On the previous dev build, I was getting similar errors if I tried to play the attached file (or several other similar ones) after successfully playing other files, but would get a black-screen crash if I tried to play it immediately on powerup (this is not what is happening on 15fa7f8).

I am NOT experiencing these problems on another AMSv1 player (Sansa c240 [”c200v1”]) with the same dev build, so this may be specific to the Clipv1. On the c240 with both the previous build and 15fa7f8, metadata displays fine and the attached file plays without any apparent error.

Rockbox hangs if the disk gets full during database creation.

Languages like Thai use combining diacritical marks which display above or below the adjoining character. When text scrolls off the screen, the text jerks back and re-scrolls what seems to be the width of the diacritical mark. It seems that the scrolling algorithm is counting the width of the diacritical mark, where it should be ignored.

When the battery is low, Rockbox is unable to charge iPod. When booting into Rockbox, the charging icon is displayed, but after a while the device shuts down.

Booting the OF and charging under it for few minutes is required.

Can't set the time of day clock

started at SVN R29234 and continues to current build.
all the builds work in the simulators but break on player.
when you enter in the settings to set clock it shows correct date but shows

00:00:00

and you can change it but it will not set returns you to settings menu and you get

1. -:–:–

unknown

built fresh svn versions each time to confirm when it started

Voicing of menus will work fine on the default font. However, if 08-Namil is used, the voicing dies upon reboot.

See also http://forums.rockbox.org/index.php/topic,51408.0.html .

I know that the folks that added recording functions to the PP targets only did it as a proof-of-concept, which rteally works well already. I am curious if anyone has looked into the bizarre noise that is generated on the right channel, I have tested this on two different 4g grayscale ipods and on 5.5g ipod. The noise level is lower in the 5.5g than the 4g's. I have attatched a png of jamin running a "silent" recording (no mic connected) and the wavpack file. I amplified the sound to get it to register higher on my spectrum analyzer.

Hacking from Antoine Cellerier’s code for solitaire.c, I put together a rough freecell game.

It currently works for Sansa E200 targets. Others should work once button mappings are done.

This is not heavily tested, so feel free to report or fix any problems you encounter.

This appears to happen only on the simulator, as of r29012.

Fill a directory with, say, some .s3m files and .mod files. Mikmod plugin chokes on calloc (virtch.c, line 1227) during MikMod_Init() sequence.

Remove the .mod files and the plugin loads and works properly.

Reverting the change made to viewers.config in r29012 seems to fix this. I'm guessing the problem is somehow related to the way mod is both playable and viewable, but there's nothing obviously wrong with viewers.config that I can see. Maybe the buffers are getting screwed up somewhere in filetypes.c?

Rockbox WebOS app.

Built on r31467, 32/64-bit Ubuntu 11.10, running on a 32GB Touchpad

Directions (only tested on the above):

* Install WebOS PDK: https://developer.palm.com/content/resources/develop/sdk_pdk_download.html

* Install platform-native libsdl-dev if you haven't already. Only needed to pass configuration check as the PDK doesn't properly install staging sdl-config for some reason.

* Apply patch (patch -p0 < filename.patch)

* cd webos

* ../tools/configure, select WebOS target (206)

* make && make install && sh ./buildpkg.sh

Notes:

* This is one big hack – I fudged just about everything in /firmware (how the target system works is still not altogether clear to me) and piggybacked a lot of this off of the SDL target. Mostly in the interest of getting it to run without adding ifdefs all over the place. Obviously we'll want to be more methodical and thorough about exactly which changes need to go where moving forward.

* The Touchpad's SDL video implementation appears to adjust orientation and scale output to fit within 1024x768 as best as possible. This means that a 800x480 build will appear in landscape mode, letterboxed, while a 320x480 will appear in portrait mode, pillarboxed. The device itself automatically orients to landscape – meaning, if you're in a portrait resolution and then you exit, everything will initially be sideways – but that doesn't affect input. Scaling routines are noticeably slow.

* I tried building this as a hybrid Enyo/PDK (window mgr friendly) app but had some problems with the native part failing to execute at SDL_Init. So for now no backgrounding or notification bar.

* Make scripts use the ARM compilers installed with the PDK. I'm wondering though if this is superfluous given that the Rockbox toolchain also supports ARM7. I did try exposing some of the ARM-specific assembly but the compilation failed with the PDK compiler.

800x480 build: http://www.jasonyu.net/webos/org.rockbox.raap_0.0.1_all.ipk

Use of the sleep timer deactivates the idle power off. Both should be independent pathways to shutdown. The Idle Poweroff should initiate shutdown if there is no playback and no keypress inside the indicated time. The sleep timer only is to use keypresses. However, the actual behavior is for the sleep timer to disable the idle poweroff. This is a bug. Instead of either or it (If … else if) should be two "If then .. If then" constructs.

The benefit is that you can save battery life if you leave the device on while player, or if you get interrupted. Currently, you can only do one.

To replicate:
use sansa clip, latest version. Set idle power off at 1 minute and sleep timer at 30 minutes (default). Play then pause for two minutes. Press volume button and note unit is on instead of off.

2. Installation
Installing Rockbox is generally a quick and easy procedure. However before beginning
there are a few important things to know.
2.1. Before Starting
Supported hardware versions. The Clip v2 is available in multiple versions…

this should read :”The Clip is available in multiple versions…”

How to reproduce this:-

Use the remote to turn on the player while the hold switch is set to lock on the player. Backlight on both the player and the remote stay on constantly (timeout is set to 5s presently).

If you set the hold switch to unlock the backlight goes off after the timeout has expired and thereafter will turn off however the hold switch is set.

Sometimes when I shut my unit off and then turn it on again and resume playback, RB resumes from a different place than where it left off, and even though when I resume shuffle is on (as indicated by its icon), it isn’t. It’ll play the current track, then the next track in the playlist (which in my case is in order by track number, so it’ll play the next track on the album), and so on.

If I turn shuffle off and then on again, shuffle works correctly again.

I’m using a build from January 19 (19800-090119) on an Archos Recorder. I
noticed this bug occurring in the 3.1 build as well.

It seems to happen randomly – I can’t figure out anything specifically that I can do to always make it happen.

sansa fuze v1 scroller doesn’t obey ‘first button press enables backlight only’

rockbox 3.5.1

After upgrading my 1st generation iPod Nano from Rockbox 3.6 to 3.9 the cover art display does not seem to be working consistently.

When using a playlist the first track will always show the correct cover art, but any tracks after that will continue to show the first track's cover. This also happens if I skip forward or backward between tracks in the playlist.

If I manually select a file to play the correct cover will show, and if I manually select another track during the play-back of the first the cover art will change to the new track.

I have also tried this with current build r30334 (2011-08-20T13:14:30) with the same results.

I tried to make the first shot on adding fm radio support for the Samsung YH-* devices.

–

I got no SD-Card support for my E-250 after boot into USB mode.
I plug in my powered off player into usb and only have access to internal storage.

If i plug in my player booted up there is no problem.

I am using daily build r29174-110131.

After upgrading from 3.13 to 3.14, when playing most of the ogg vorbis files in my library, a "beeping" sound sporadically occurs.

The sound is random (2 consecutive playbacks of the same track will beep on the same time).

All the files played fine with 3.13.
MP3 files play just fine (I have not tested other formats yet).

Possibly interesting facts :
Vorbis files with a lower bitrate (<100kpbs) seem to be less subject to this beep.
It seems beep never occurs when screen is on.

This is a recurring problem with this target it seems. With 3.1 installed and resume playback on start up enabled, playback hangs and skips badly while the hard drive is being scanned during start up.

The same behavior occurs when resume on start up is disabled, but playback is resumed by the user during the hard drive scan.

Changing “Enable EQ” setting does nothing until the player is restarted. However, selecting an EQ preset does enable the EQ and take affect within a few seconds. With the new 3.13 presets I am working around this issue by simply selecting the “Flat” EQ config file to “Turn Off” the EQ. I have tried stopping playback and skipping around to other tracks forcing the buffer to refill. That doesn’t work.

I don’t know when the bug was introduced except that testing 3.11 on my Gigabeat F proved it WAS NOT present in 3.11.

I have verified the bug in 3.13 on all of these targets, so at this time I’m saying this affects all players.

Confirmed on Fuze v2, Clip v1, Clip +, Clip Zip, Gigabeat F

installed rockbox and doom (freedoom) all correctly. but problem is that the navigation keys dont work when the game starts. cant move. but i can bring up pause menu by flicking hold on then off but then only up(menu button) works in addition to the center button being able to select

to reproduce:install latest build for ipod classic 5th gen 30gb
install doom from the rockbox utilities program
run doom in ipod
game loads
face at bottom of screen moves, showing it isnt frozen… cannot move

and yes i have tried configuring the keys, it doesnt work

When the c200 is docked (as detected by the charger discrete being active), switch to line out. This was necessary for the Griffen “iTrip Auto for Sansa” adapter to produce output. I would assume this is necessary for other docking stations.

This is *NOT* a perfect patch, but it is a start and is necessary to make docking stations with audio output work.

Limitations:
* I mute the headphone output, so plugging in a non-docking charger will prevent listening via the headphones while charging. Both can be enabled… if the charger is plugged in, it probably isn’t an issue but that is what the Sansa firmware does.

* The charger/headphones detection is done only on power up. This is suboptimal, but usually “correct.” A better technique would be to hook into the charger status announcements, but I don’t have time right now.

This is a 3D maze done in vector graphics. I ported David Leonard’s program, which was done with the curses library. Initially, I wrapped the curses functions he used in order to draw the maze with putsxy().
This code is not used at the moment, as the vector graphics are easily scaled and more pleasing. The only issue I see is with the user map, which may be harder to draw on a smaller screen. I developed this on the iPod Video.

This is my first attempt at an open source project, and is a refresher in C for me. I apologize for style. I have tried to make the code as clear as possible.

I think I have experienced a bug in 3.7+ builds with WPS themes related to %Vf.
If you put the %Vf on a new line, the following text is displayed, then cleared, but only if its a scrolling line, if the first line is static it is displayed properly, and subsequent lines are also displayed properly even if they are scrolling

example:

%Vl(b,0,108,176,60,1)
%Vf(999999)
%s%ac%?Ia<%Ia|>
%s%ac%?It<%It|%Fn>

artist is displayed briefly then cleared, if you take out %s artist is displayed properly, if you put the %Vf on the same line with %vl artist is displayed properly with scrolling, if you put a static text line before the first %s line then all lines are displayed properly.

so my quick fix is to just move the %vf on the line with %vl, but this bug probalby breaks many WPS, also this worked before 3.7, not sure when it stopped working. Tested this bug with latest build:r28534-101108 and 3.7 release sansa e200 v1. (also with latest e200 simulator)

this bug was not in builds up to or prior to: r27944-100830

Build is r23841 and earlier.

Occasionally when I reboot to the iPod firmware, something has caused the previously unset alarm setting to be enabled and the playback mode is set to shuffle. This doesn't happen with every reboot, but does more than 50% of the time.

Steps to duplicate:

1. Disable the alarm and set the shuffle mode to "None" in the iPod firmware.
2. Reset and boot into Rockbox
3. Listen to a few tracks
4. Reboot into the iPod firmware and check the shuffle mode and alarm settings.

I can't confirm 100% yet as to the time on the alarm being reset as well, but it does seem to consistently read 6 AM - which is a bit of a shock if I've been listening in Rockbox during the day and then I reboot into the Apple firmware and dock in my iHome, expecting to sleep in late on the weekend.

(Confirmed this in 4c6c8cd-130926, discovered in build from several weeks earlier)

If ‘Voice Menus’ are enabled, entering the Recording menu will freeze the player…usually before the entire screen is redrawn. Although I can still hear the sound the mic is picking up, the player is locked up, and removing the battery or super-long-pressing of Power is required.

During my testing, I was able to randomly get it to -not- lock up, but it was like a 1 in 50 occurance…tried all formats/sample rates/etc. When ‘Voice Menus’ is -disabled-, all formats/rates/etc work fine.

Thinking it was a problem with my config that I’ve been using for years, I tried with a clean config.cfg (well, deleted and let it regenerate), and narrowed the cause down to the spoken ‘Voice Menus’ being enabled.

H140; R-box v3.10 and current.
codec; libFlac v1.1.0. 20030126
Embedded cue sheet; No.

When playing my only FLAC album (6 tracks), I can reproduce the following condition at will,
The player hangs in the last track, player does not respond to buttons and only a hard reset will fix it.

I can consistently reproduce the above bug as follows,

I start track 1 and let it play for a few sec's, then FF to 5 sec's before the end of track 1,
let it play the remaining 5 sec's of track 1 and let it change into track 2,
Play a few sec's of track 2, then FF to 5 sec's before the end of track 2, let it change into track 3,
Play a few sec's of track 3, then FF to 5 seconds before the end of track 3, let it play etc… ( I repeat the above until I'm in the last track),
when it has changed into the last track, FF to 5 sec's before the end of the last track and let it play, when play time reaches 1~0 sec's before the end of the last track, the player hangs in that last track with the disk activity light on continuously, player does not respond to buttons and only a hard reset will fix it.