Stereo width of >0% can cause stutter in the form of an audible click.

Bypassed by setting stereo width of 0% or monophonic channel configuration.

I like to keep the equalizer on with the precut set to -24db, as a volume limiter. I also like the fade on stop/pause set on. When I pause there is a noticeable ‘click’ sound after the music fades out. Also a click before fading in when I resume.

This was not always the case, but I am not sure how old the version I was using, that did not do this.

By the way, this also occurs on the Gigabeat S, as well as Gigabeat F. I don’t know about other models.

Let me know if you need more information.

Hi,

I think that the problem reported on  FS#10919  is still here, or at least not completely solved.
But now, I get the feeling that the pause only happens when the buffer refill is triggered via a track skip. During normal playback, it don't seem to happen any more.

The build I tried it on is r25249.

TIA

This is a reopening of issue  FS#7354  (quoted below) related to playback problems involving cuesheet support and flac files (labelled #1 in the original post). Jumps to certain positions in flac file according to the cuesheet fail consistently.

The bug is extensivelly described in the original report and can be easily reproduced in current versions. I reproduced it in many situations with the following configuration:

Equipment used: Cowon D2 and Cowon D2 simulation
Rockbox version: tested on r25508-100407 and r24777-100219 (simulation)
Rockbox settings: Cuesheet support ON, other on default
FLAC files: Ripped form my original CDs with EAC (to WAV and cuesheet) in secure mode and processed with FLAC 1.12 and/or 1.14 compression level 8. MD5 checksums on cuesheets and FLACS checked. Cuesheet syntax OK, cuesheet file encoding UTF8-DOS and/or DOS. Works properly my on computer.

Quote of the original post

When the option “Auto-change directory” is enabled, my Ondio crashes at the end of the current folder’s playlist when it would have to create a new one.

The error it shows is “I09: CPUAdrEr at 09010FF8”. The address varies a bit with the actual revision, this example is with r26246 and an OndioFM backlight build (but the problem is present in plain SVN builds too). Looking at the map file shows that the crash happens in the cue_find_current_track function.

Bisecting build turned up that the error was introduced with the cuesheet rework in r21978/9 and the fix in 21982 fixed usual folder playback but not auto-change directory. It is reproducible on the Archos Recorder so I assume a general hwcodec problem.

This patch adds an option to allow the Fastforward/Rewind buttons to be used to skip tracks entirely.

This is an itch of mine that I scratched and am offering up to others if you are interested.

I’ve been using audio lessons to learn Japanese and ran into issues navigating with the normal FF/RW buttons. The acceleration based on track length left me with no sense of time since I don’t keep track of how far I am into my 30 minute long lessons. Simply backing up 5 seconds to catch something I missed was a problem because I’d have to look at what I was doing to see how far I’d ff/rw. Kinda hard when one tick moves 30 seconds too. This is problematic when driving! The existing skip-length feature is really good for this. However, if I use that to skip 5 second increments then I abandon any way of skipping entire tracks. So I re-purposed the FF/RW buttons for skipping tracks and use skip-length for navigating within a track.

I’ve been using this in r27841 for about a week on my Gigabeat, but it seems like it should work for r27942 as well.

The Last.fm scrobbler lists in the scrobble log songs that ive never listened to

This patch should save pitch and speed settings to nvram, and restore them after reboot if needed.

If I read the code correctly, there should be enough room in nvram (and anyway, the way this is done doesn't apply to any targets that actually use real nvram)

This code compiles, but apart from that it's completely untested.

Of course, since this patch increments the nvram data version, you'll lose resume info the first time you reboot.

I’m using revision 29572 of android port. Host system is Samsung Galaxy 3 i5800, with 240×400 resolution display, with version 2.2 (Froyo) of Android.

The problem is as follows. When trying to start playback of OGG or SPX files, the playback does not start occasionally (the change is maybe less than 20% to have playback). By rewinding randomly it is possible to get it start playback. The same behaviour occurs when starting from bookmarks and from file explorer. The problem occurs with default config file.

Tried with MP3 and had the same problem. The problem may be with other codecs as well but I have not tried it so extensively.

Best

Players: Sansa Fuze v2
R29716-110415
Note: This was happening on a build from a couple months ago to..

When I have "load last bookmark" on I can't access any other files in a folder with a file with a bookmark. Even time I hit a file it'll always load the file with the latest bookmark, the only way to play another file is to use the forward/rewind buttons.

Adding last.fm scrobbling support to the Android version via one of the existing Android Last.fm apps is actually very easy - the log file approach doesn't seem to be compatible with e.g. the actual Last.fm app. Last.fm supports the scrobbledroid api. Adding scrobbledroid intents into the RunForegroundManager class adds support for scrobbling in about 10 lines of code. Attached is a patch to add in the appropriate intent creation and sending. This code could be modified to allow toggling via the settings page, but I don't know much about the native framebuffer code for the UI that is used by rockbox for android. I leave that to somebody else to implement if this is deemed to be too inflexible. I just want to submit this code so that others may enjoy last.fm support without having to jump through hoops to upload log files to last.fm on Android devices.

would like to report a bug in
i am shuffling through songs and set crossfade to shuffle only it still fades when i do a manual track change this does not happen when i set shuffle
should not occur as there is an option for shuffle and manual track change only, so the two options have the same functionality when i am shuffling it should be able to differentiate between
should be able to register that i have pressed next so the next song should not fade even though it is on shuffle.

at least r30058
On the Sansa E280 v1 with a playback speed of 200% the playback restarts at bookmark plus about 2 seconds.

space80 is a digital-plate-like reverb effect, i dump it from my soundcard driver and translate it to c code, the original author is stylus02, thanks him for teaching me many things about the dsp theory:)

about the speed:
eats about 21.86MHz cpu on a cowon d2 target

The attached patch implements sinc based resampling in rockbox.
I have only tested it stand-alone so far (i.e. the code outside of rockbox – I am waiting for a replacement for my broken android phone to test it there).
There is (of course) quite some room for improvement.
Things which could be improved:
- buffer handling
- calculate the correct sinc spanning the whole table for downsampling. Then the downsampling and upsampling code would be the same (no need for sinc_increment, saving some additions). Also the result would be more accurate resampling.
- Save some memory by always calculating the correct sinc and putting it into resample_data. Would need to use fp_sincos() for that.
- Save some more memory by taking advantage of sinc's symmetry, only storing half of it in the table.

I know that I'm breaking the coding-style by using more than 80 chars in some lines. I will fix that when I have time. I wanted to get this code finally out to get some feedback after it sitting for two weeks (basically unchanged) on my HD.

On build 30622 and previous builds, there is an issue with resuming playback.

When "Resume Playback" is selected from the menu, you transition into the music control screen but there is no output aside from some crackling noises.

Occasionally, the song would play for half a second before silencing.

The play/pause button during this situation shows a pause symbol which suggests that the song is supposed to play. However, the song progress bar remains at 0:00.

Currently on Cyanogenmod 7.1 nightly, Android version 2.3.5.

I think there is a problem with a .ape codec ,when i play .ape files it will have a sound like radiosound.The time happen randomly with each .ape files and when i playback again it still happen at that time.Exp:ABC.ape will have have a noisy sound at 0:10 and when i play again it still happen at 0:10

r30804
The rockbox (r30804) Can't play ape files with CUEsheet (APE + CUE files).

m4a Songs skip in middle of playback, to next song.
always at same point. fast forwarding beyond this point is fine.
files work fine on other devices/PC.
reverted back to v3.6 and all such problems are gone

With r30907 (and also back to at least r30809 which I tested as well) I experience unneeded mass storage accesses on my iPod nano2G. I do not see this effect on my iPod Video.

Use case:
- Create a playlist from either DB or file browser
- Let buffering finish
- Skip forward track by track
(I use mpc/mp3/aac with embedded album art.)

Effect seen: For some skips I see short flash accesses (much shorter than full rebuffering).

This only happens if dircache is off. With activated dircache this effect is gone.

As such mass storage accesses are severely impacting the battery runtime on HDD targets I hope we get this figured out before v3.10.

I have RockBox version 3.9 on my Sansa Fuze v2 and so far I love it, but I have one problem. On a few tracks in my library, when I play them, the first few minutes of the song will be strangely distorted. Most of them are songs where the music starts off in just one of the speakers before moving into the other one. There will be bursts of loud, crackly noise in the other speaker during these first few seconds (that seem to be in time with the music) and then it will fix itself and the rest of the song will play perfectly. When I boot the default Sandisk firmware the songs play perfect like they should, it is only in RockBox that this glitch happens. I’ve messed with the settings a bit and even reset them completely, but nothing has worked thus far.

Attached is one of the songs that this happens with, from about 2 seconds in to about 7 seconds in. Any help would be greatly appreciated. I really want to enjoy my music without that crap in it.

Hardware: iriver H140, iriver H340, Sansa Clip+

Rockbox version: 3.10 downloaded from http://www.rockbox.org/download/byhand.cgi I have also reproduced bug on official firmwares as old as 3.5.1, and on my own builds.

Settings: 100% default except for enabling EQ and setting an EQ i.e. using graphical EQ to set LS -0.5 at 60Hz or LS +1.5 at 60Hz

Expected behaviour: music track, however loaded, starts in normal way, with no sounds other than those decoded from file. Restarting the track results in the same normal playback.

Actual behaviour: music track starts with an obvious and intrusive click. This happens whether the track is loaded individually, or if it is the first track of an album loaded via .m3u playlist. When using playlist subsequent tracks play normally, without a click. But restarting any track causes the click.

It makes no difference if the EQ Low Shelf Filter settings are a big change from flat, or a tiny difference. To induce the bug it’s enough that EQ is enabled and LS is not set to be flat i.e. just an increment of +/- 0.5 dB is enough, and changing the cut off frequency or the Q factor made no difference.

This bug is noticeable with any track that starts quietly, and especially with tracks from CDs that are not mastered to modern high levels.

The Clip does tend to make its own small click on manual track changes and some button presses; I am not confusing this with the bug I describe. On the irivers I get a single click, while on the Clip I get a very unmusical double click.

I’ve attached my H140 config to illustrate that the config is unremarkable and that apart from the EQ it is at default. If anyone needs me to try stuff or make any changes or try a patch that is fine, but I would prefer it to be on an iriver because the Sansa OF database refresh is so annoying.

Sansa Clip v1. Stable version 3.10 [Tracker didn’t let me choose it?]
After playing the item for some time [varies] Rockbox crash and give this error:
Data abort
at 3001913E
FSR 0×8 (domain 0, fault 8)
address 0x7261702D

Using DFKT Minimum Clip theme.

There is different level audio between Radio and Music Playback with the same db value. Level audio on Music Playback is too low.

H140; R-box v3.10 and current.
codec; libFlac v1.1.0. 20030126
Embedded cue sheet; No.

When playing my only FLAC album (6 tracks), I can reproduce the following condition at will,
The player hangs in the last track, player does not respond to buttons and only a hard reset will fix it.

I can consistently reproduce the above bug as follows,

I start track 1 and let it play for a few sec's, then FF to 5 sec's before the end of track 1,
let it play the remaining 5 sec's of track 1 and let it change into track 2,
Play a few sec's of track 2, then FF to 5 sec's before the end of track 2, let it change into track 3,
Play a few sec's of track 3, then FF to 5 seconds before the end of track 3, let it play etc… ( I repeat the above until I'm in the last track),
when it has changed into the last track, FF to 5 sec's before the end of the last track and let it play, when play time reaches 1~0 sec's before the end of the last track, the player hangs in that last track with the disk activity light on continuously, player does not respond to buttons and only a hard reset will fix it.

I'm using Rockbox 3.10 with the 01.02.16 Clip+ Firmware on a Sansa Clip+ 8GB, installed via the installer.

There are a lot of 44kHz/16bit FLAC files stored on the device. During playback it could happen that the next track starts while the current one isn't even close to finished. This can be in the first few seconds or in the middle of the song.

This usually doesn't happen to the same song twice. It's generally a different song each time. When skipping back to the track that was skipped, it usually plays without any problems.

The memory has been checked with CHKDSK and no errors were found. The FLACs play fine in foobar2000 and I'm certain that they are okay.

I do believe the error occurs most often after roughly quarter to half an hour of playback.

This may be related to FS#12208

When I skip backwards 3 songs, Rockbox aborts with the following dump:

Data abort at 60077EB8
FSR 0x1
(domain 0, fault 1)
address 0x00000005

It happens always, playing or in pause. At the 3rd song dumps.

RB version: 04cd1fd-120320

Regards!

I'm using a Sansa Clip Zip, which hasn't been added to the Player Type list. I've noticed that several MIDI files crash the player, reporting OUT OF MEMORY and MALLOC BARF errors. This is more likely to happen with MIDI files with many instruments, such as orchestral pieces. One example is a MIDI file for Debussy's La Mer. It tries to load all instruments into memory before playing and will crash without playing anything. I don't know if this can be fixed with better memory management or if my player just has too little RAM.

So, I have a Clip Zip at the moment. Been using rockbox on it since day 1, and since day one i've always had an issue: during playback, when accessing files from the SD card, the player randomly freezes. It's not always, it's not when accessing the same files or some specific characteristic shared by them, it just appears to be random. When it freezes, the LCD usually still responds to my commands (i can access menus, see the file info, even change song and it will display in the playback screen), but the actual playback doesn't, and I eventually have to hard reset it. I guess it's some kind of SD compatibility issues: I have an 8GB class 4 PNY. I know it's not the own card's problem since it worked perfectly on my Clip+ and does on my Android Cellphone.
I've been updating daily builds for this device at least once a week since I got it, and it happens with every build.

Not sure how long this chronic bug has gone on but at least before the dubious move to git from subversion. I have had trouble on my V2s with freezing (appears like they are loading in the middle of a song but nothing is happening and you can't do anything) while playing and recently freezing when adding tracks to a playlist. I can take the microSD/transflash card out and stick it into a V1 Fuze and there is no problem, it will play forever and never crash. The V2s will crash minutes after playing, sometimes a track will finish, sometimes the same track will get stuck, one time it happened less than a second after beginning to play. No white screen of death, just a soft freeze and a blinking loading indicator. If you fiddle with it it will stop blinking and become utterly unresponsive. Have tried formatting cards, etc. V1 players work fine, V2 players are now junk under this firmware.

I don't know exactly how long this problem has been going on but it has been getting worse. Before the 30,000th SVN release, perhaps somewhere around 28000, I would be getting crashes occasionally with the V2s but nothing like this. My v2 players will unconditionally crash now after a short time. Rockbox is unusable for me on my V2 Fuze players. A lot of digging may be necessary to get to the bottom of this problem because I think it is buried under a lot of newer modifications.

I will not submit any sample music files (I know you guys always ask), this is problem exclusive to AMSv2 and I am sure by now that some Rockbox developers are aware of some issues that could be attributed to this sort of problem.

The player (Sansa Clip Zip) appears to refuse or unable to play some of my WMA tracks; as far as I can tell, the problem is specific to my WMA Pro files only as it plays none of them (but works with WMA2 successfully). I have attached one of the examples.

I understand that a similar issue was reported recently (in  FS#12619 ) although, in my case, the player doesn’t start playing and skips to the next immediately, rather than playing part of the track.

Rockbox crashes when stopping playback of ogg vorbis files. This happens both, when I stop playback through long pressing the play button or simply if the last track in the current playlist is finished. It does not happen when stopping playback of mp3 files. Pausing does not cause a crash, only stopping does.

I reported this problem already in  FS#12669  which was closed since it was asserted to be fixed, but it wasn't and isn't fixed for me.

The bug occured in version 688302a of 04/08 13:15. All earlier versions (tested back to bb0e4cc of 04/05) are working and later versions are crashing. I just tested current version e5d6e42 and Rockbox still crashes.

I have a Samsung Galaxy S running Android 2.3.7 (CyanogenMod CM7.2.0)

I’ve been using the latest dev builds everyday for iPod Nano 2G and still encountering “Swapped Channels” on Playback (e.g. Left Channel → Right Headphone / Right Channel → Left Headphone).

Used latest build 5785cfb-120625

When playing FLAC audio tracks, they are no longer playing gapless. There seems to be about a half second gap between tracks.

iPod Video 5G
Rockbox 3.11.2 / r21506
Bootloader 2010-05-25T22:02:55

Issue is present even when using default theme and font; Docked or not docked.

I tried increasing the buffer and that had no affect.

On my newly purchased (but used) Archos Internet Tablet 70 250GB with Android Version 2.2.? (Froyo) I installed the daily build of rasher. Everything works so far, but playback of MP3 (mostly 160 Kbit CBR and ~200 Kbit VBR) pauses briefly every 2 to 3 minutes. I just reformatted the drive, which now has ext3 and that seems to end the pause which I got on FAT32 after ~4 Seconds of every new song, but every 3 minutes or so the playbacks stops for about a second - very annoying. Don't tried other codecs as I don't own any files other than MP3.
I was in the developers menu during one of this pauses, looking at the list of the contributors. The old names fly away to the right, but this was frozen also during this one second timespan - as if the rockbox-process was paused entirely or so.

Sansa Clip Zip has big problems with Lossless files. BIG.

1) Flacs skips randomly, at every encoding level (5 or 8 it's the same) and it's impossible to reproduce this issue when I want. It skips to the next track randomly
2) Ape files stops to reproducing and makes a really big noise, this after 30 sec. or 3 min… or nothing at all.
3) Wavpack files, sometimes, stucks for 0.5 seconds and then, it continues to play. It happens to Fast encoding, or Normal encoding, it's the same.
4) AAC files make little noises and, sometimes, crash Rockbox.

Flac and APE problems, I'm sure, occurs from ages, I bought Clip Zip months ago and these problem occurred for every build and ofr every Rockbox release.

I don't think that my player's broken. These problems were previously posted by other people.

I think that the testing of builds were made too hastily, there are too many problems with lossless files. I can understand APE that requires an expensive decoding, but FLAC files couldn't have these problems :(

This is a reopen of issue #1 of  bug 7354  (http://www.rockbox.org/tracker/task/7354)

SETUP:
HW: sansa clip+
SW: 8687b98-121001

CD's ripped as wav/cue with EAC 1.0b3 then converted to FLAC w/embedded cue with cuetools 2.1.4; used accuraterip to confirm good rip.

EXPECTED BEHAVIOUR:

loading a flac w/embedded cue would display markers within the track and allow forward/back skipping within the track.

ISSUE:
Some tracks I am unable skip to using next/back or rewind to the start of using back.
If I listen to the whole preceeding track then the display updates correctly as it goes.

I've tested this with a handful of CDs, and given the previous bug, this appears to be a general issue with flacs/embedded cuefiles.

Sans Clip V2

24bit 96000 Hz 6 Channel (5.1) FLAC files skip to next song after 30 seconds. 30 seconds is an estimate because my screen is broken, so I can’t see what’s happening. I downloaded a daily build 3 days ago, but I think it’s a buffering issue. Flac is 8181 kbps (says Foobar).

It’s the first time I tried these files, so I don’t know if they ever worked, or ever will.
If they never will work, I’m sorry for reporting this.

Thank you all for your time and efforts.

this is ordinary mp3 file.
I think it was name problem, renamed to simple.
Still not play.
Player Sansa Clip+ (not found in bug report menu)
Rockbox 3.12 (not found in bug report menu)
Standard firmware has no problem with this.
Good luck!

It is 16Mb size so I put it to my dropbox
https://dl.dropbox.com/u/17669498/rockboxbug/08.mp3

Player: Sansa Clip+
FW: Rockbox 3.12, official stable build, but it happens on older versions too

While playing some FLAC file, RB skips to the next track automatically. I know there is a lot of similar bugs, but this is unique:)
Firstly, the problem is repeatable on my Clip. Skipping is always at one time, e.g. 00:19 for one file and 01:40 for other one. I think that these files are stored on corrupted part of SD card. OK, if it's corrupted then I have to buy a new one, but when I switch to original Sansa Clip+ firmware it play normally! At problematic places (00:19 or 01:40) there is a little 'click', but it continues to play. My conclusion is: if original FW handles such a files on bad memory, Rockbox should has workaround also.
Files are OK, when I copy them to internal memory, Rockbox plays continuously.
I didn't notice skipping of MP3 files on the same SD card, only with FLACs.
Computer players (e.g. AIMP) plays FLACs from this SD without any problems.

I've attached movies that presents the bug on 2 different tracks. Hope it helps.
http://youtu.be/0e4Xf8rKTh0 http://youtu.be/zl4LX4wEwlI

Rockbox versions: all from 3.7 to 3.12

There are really loud and annoying digital squeaks during playback on some tracks only (wma 64-96kbps). Usually the noise occurs when one channel is silent or almost. The problem doesn't occur with the OF. It makes no difference where the song is stored (sd or internal memory). The same tracks play fine on the pc. I attach a portion of a song I've recorded while playing on the device where the noise can be clearly heard.

Sometimes my Clip Zip gets in a state where I can resume playback after booting it but then it doesn’t let me seek anymore (seek thingy still moves but then jumps back to where it was, playback is totally unaffected which in this case is bad of course). I also can’t pause or skip. I can go back to the main menu but I can’t move the cursor or go back to the WPS. When I go into the playlist by long-pressing down, the list usually appears but is not functional although here I can usually move the cursor up and down (sometimes I only get a kind of frame but rendering freezes at that point). Trying to shut down lets the “shutting down” popup appear but that’s it.

I seem to remember that going via “recent bookmarks” once was a workaround but in the current state this doesn’t work either.

This broken states persists between shutdowns (or well, switch-offs more like since shutting down doesn’t work). I also tried to recreate the playlist but that didn’t help either so I’m currently stuck with a player that will play but I can’t it make change what to play. I will also have to listen to the same podcast over and over again since no new resume position is saved.

The build I use is 42a725f.

Oh and sorry I didn’t choose the right player. Couldn’t find any Sansa Clip in the list in fact :/

Rockbox Daily Build rev 085c10 (2013-01-30)
120gb 7G iPod Classic.

When I connect my rockboxed iPod Classic via Line Out (Apple Dock or Fiio Line Out Adapter) I’m getting heavy distorted with clipping an low volume sound. Headphones out its working while connected to the dock.

Same reported in the mailing list (http://www.rockbox.org/mail/archive/rockbox-archive-2012-10/0006.shtml). Stock firmware, and rockboxed iPod Video (5.5G) working with the same setting.

I have no programing knowledge, but I’m willing to help!!

Hi,

I’m experiencing an issue with WMA Pro playback on my Clip Zip.

I’ve got the lastest stable build of Rockbox 3.13. Files were encoded with dbpoweramp.

Some files playback normally, but majority of tracks skips. Always at the same point if not forwarding or rewinding.

Here’s a sample. The track skips at 2.15.

Rockbox 3.1.3 on Clip+ (also iriver h140/340. also previous versions of rockbox).

Some HE-AAC files play back at half speed.

Example file info (comment/lyric fields removed as very long):

General
Complete name : Witness_-_The_Khmer_Rouge_take_power.m4a
Format : MPEG-4
Format profile : Apple audio with iTunes info
Codec ID : M4A
File size : 4.09 MiB
Duration : 9mn 0s
Overall bit rate mode : Constant
Overall bit rate : 63.5 Kbps
Album : Witness
Album/Performer : BBC Radio
Track name : The Khmer Rouge take power
Grouping : News
Performer : BBC World Service
Composer : BBC iPlayer
Genre : News
Recorded date : 2013-04-18T08:50:00+01:00
Tagged date : UTC 2013-04-18 09:07:25
Writing application : Lavf55.0.100

Audio
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : HE-AAC / LC
Codec ID : 40
Duration : 9mn 0s
Duration_LastFrame : -1ms
Bit rate mode : Constant
Bit rate : 62.7 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz / 24.0 KHz
Compression mode : Lossy
Stream size : 4.04 MiB (99%)

30 second sample attached (cut with ffmpeg, full metadata)

Forum report http://forums.rockbox.org/index.php/topic,43012.0.html

This may be all players; I have only had experience with the Sansa Clip+ and Clip Zip. On version 3.13 the Automatic Resume feature works inconsistently, especially on the 2nd+ file of a playlist.

In version 3.11.2, the feature worked correctly on my Clip+. If I paused the player and the player turned off due to the timeout, when I turned the player back on and pressed the “Home” button or “Resume Playback”, the entire playlist would be back in place and playback would resume at the spot I paused. If I was 30 seconds into the third file in a playlist, playback would resume at that point. When that file finished, the next file in the playlist would start. Pressing “Previous” or “Next” would play the previous or next file in the playlist.

In version 3.13, this feature does not always work correctly. In fact, it rarely works correctly when playing a file that is not the first file in a playlist. Some times it works fine. Most times when I try to resume playback, it instead plays the beginning of the first track in the playlist. Some times when that happens, if I manually navigate to the track I was in when I paused, it will resume that track from the correct position rather than starting it over from the beginning.

This behavior is seriously agitating. I use my player to listen to multi-hour podcasts broken into separate files for each hour. If I get a phone call and pause my player I expect my player to automatically shut itself off after a few minutes, and it does. When I start the player again, I want to be able to pick up just where I left off. On versions prior to this, I could. In 3.13 it does not work 9 out of 10 times.

In FAT, file name can have max 255 characters (not bytes).
A file name that have 255 characters(contains many multibyte characters) is listed in File menu, but playback can’t.

Using patched firmware\include\file.h as a test, MAX_PATH 260 up to 520, rockbox can playback the long name file.
But, changing theme causes PANIC.

Short Next + Long Next causes a hang about 50% of the time. This was reported before and still seems to happen on the Clip Zip.

I tested this on a clip+ (3.13) and creative zen (rev cc64d9e), so assuming it’s the same for all devices.

Following setup:
- ReplayGain is configured to “Track if Shuffle” - “Prevent clipping” is set to on/off, does not matter

How to reproduce:
- make a copy of any RG scanned file which has track/album gain and peak tags
- remove the peak tags _only_, leaving gain tags intact

Expected result:
- player should be able to adjust the volume, but not prevent clipping

Actual result:
- player does not apply neither track not album gain.

Files containing only gain tags but not peak tags come from converting lossless → lossy and transferring gain info (since peaks will be different for the lossy file, peak tags are omitted.) With 11db of volume difference on some tracks, it’s impossible to not notice that. I am not sure why applying RG requires peak tags in rockbox, foobar2000 handles peak tag-less files without issue. Any chance to change this behavior to not rely on peak tags?

http://web.mit.edu/mgg6/www/cover.jpg

This file is correctly decoded and displayed in the Fuze+ simulator, but testing on device results in playback stopping. Interestingly, nothing crashes, playback just stops. In theory we should be able to decode this, the resizer does not need to load more than a few lines of the image at once, which should easily fit in memory. Alternatively, if it is too large (or rather wide given that its decoded line by line) for the available space, it should probably just be rejected.