Rockbox

Some collections (such as ftp://sunsite.unc.edu/pub/Linux/games/amusements/life/dblifelib-2.tgz) use an extension of “.l” instead of “.cells” for what appears to be the same file format (same comment character and same characters for dead and live cell).

This patch just adds an entry to viewers.config so that Rockbox will treat .l files as supported and open them with Rocklife.

By default logf() will output to the serial port if that is enabled (HAVE_SERIAL). This is kind of distracting if logf() is used to debug serial communication itself.

The attached patch does the following:
- make logf() only output to serial if LOGF_SERIAL is defined (defaults to undef)
- adds an advanced configure option to enable LOGF_SERIAL

The patch is against r30429.

m4a Songs skip in middle of playback, to next song.
always at same point. fast forwarding beyond this point is fine.
files work fine on other devices/PC.
reverted back to v3.6 and all such problems are gone

Version: r28861
Used before: r26706

Hello,

with r28861the touchscreen works with glitches.
When I touch a line-item , the system sometimes don't react or the line selector just "twinkle".

My conjecture:
It has somethin to do with the new "kinetic-scroll"-feature, because after a little kinetic-scroll the touch become precise.

(And yes, I've done a calibration: no effect)

I have sansa clip+. Lrcplayer opens and plays USLT tag instead of SYLT tag if there are both in mp3 file and no external lyrics(.lrc, .lrc8, .snc, .txt) so lyrics which play are not synchronized. Please make SYLT tag opens and plays defaultly instead of USLT tag.

build: r31372-111219

i am using SYLT and USLT tags in my audio files (LYRICS and UNSYNCED LYRICS respectively)

but it seems like lrcplayer does not read the SYLT tag.
it only displays someting if the UNSYNCED LYRICS tag is present

I have a Sansa Clip+, Clip Zip and Fuze V2 all running various RB versions. The crash happens on all of them.

To focus I will use the Clip Zip (as its close at hand) and tell you what it does.
I get:

Prefetch abort
at 9D8DE9B4
FSR 0x11
(domain 1, fault

on a white background screen

This happens when trying to use the lrc plugin on the clip zip running RB version 4.0 (r31646-120109) and accessing a sandisk 16gb sd card that is 12.5gb full.
But i can confirm i get this message (or a similar one) on my fuze v2 and clip+ which are running 'stable' albeit older versions of rockbox (again from sd cards). I mention the sd cards but im 90% sure it happens on songs on the internal memory also.

I suspect it has something to do with my mp3 files having lyrics embedded within them but not as .lrc files. All i can explain is this:
I use wiki lyrics to find lyrics for songs and then right click copy them and use Tag&Rename and Paste into the mp3 file and save.

Using this method works fine for displaying lyrics when using ipad2's stock music player (pre iOS5) and androids app Poweramp for Samsung galaxy S2 phones and Creatives Ziio 7 tablet (running poweramp). This method also works for my Pc when running foobar and using the 'TextDisplay' component. The Text Display Format in foobar settings are $if2(%unsynced lyrics%,No lyrics available)

It should be noted that when using poweramp and choosing 'Lyrics' it asks where u want to choose to read the lyrics from:
-Auto (from tags if available, otherwise via musixmatch plugin)
-Musixmatch plugin
-From tags

I select the last option (from tags) always and it never fails. ipads player seems to also use this method. The lyrics do not scroll automatically, u need to scroll up and down to read them (should they be longer than the visible screen).

Occasionally lrc plugin wont crash if it actually finds a lrc file embedded in song and works fine. But this rarely happens, perhaps only 10% of my collection has lrc files embedded within them, soon as it goes to next track without one it produces this error.

I just did it again for a different file and a different error.

Prefetch abort
at A0A0EE94
FSR 0x11
(domain 1, fault

and so on so forth.

It is a patch that can automatically output the result of logf to the
file.

The setting of default doesn’t output the result of the logf to the
file.
Please set and do the following when it is effective.

System > Debug > logf auto file output: select "Yes"

Hi,
I am using a Sansa Clip Zip with Rockbox 3.13.
I’ve noticed, when I lock or unlock the device, the message, which indicates the current state, does not disappear completely. Its still there.

Cheers,
Conrad

Players: Sansa Fuze v2
R29716-110415
Note: This was happening on a build from a couple months ago to..

When I have "load last bookmark" on I can't access any other files in a folder with a file with a bookmark. Even time I hit a file it'll always load the file with the latest bookmark, the only way to play another file is to use the forward/rewind buttons.

firmware/export/usb_ch9.h comes from linux (include/linux/usb/ch9.h) with only trivial changes. The original doesn’t mention a specific license, so it probably is GPLv2
file basically contains only structure declarations and defines for things straight from the USB specification though, so I’m not sure if there is a real problem.

If LCD_SLEEP is put on the backlight queue immediatly after BACKLIGHT_ON, the LCD will go to sleep immediately after the backlight turns on. On the 5G iPod, the next backlight_on() call will wake it, but on some other targets it might not wake again.

For example, consider the following sequence of events:
1) backlight_on() is called, putting BACKLIGHT_ON on the queue
2) The LCD sleep timeout from the previous backlight shutoff puts LCD_SLEEP on the queue
3) BACKLIGHT_ON is received and the backlight is turned on. The call of backlight_lcd_sleep_countdown(false) does nothing about the LCD_SLEEP on the queue.
5) The LCD_SLEEP is received, putting the LCD to sleep again.

This patch causes LCD_SLEEP to be ignored by backlight_thread() when the backlight is on. It also removes a workaround from 5G iPod LCD sleep code.

This issue is theoretical and very improbable. I am not able to trigger this bug in r20774.

at least in the 16bit lcd drivers, all functions which use transparency (or clear pixels) get the pixel colour from the backdrop image, completly ignoring the bg_pattern.

This isnt a problem except in skins where it is perfectly reasonable to want a background image for most of the screen but a solid colour for one or two viewports.

There is a tiny problem though, bg_pattern is set to LCD_DEFAULT_BG which is a valid colour, so we probably need to add a flag to the viewport struct to say if it should ignore the background image or not.

In the never ending saga of strnatcmp the fix for 10029 sorts as
001
002
01
02

Attached is yet another attempt to get it right.

The Last.fm scrobbler lists in the scrobble log songs that ive never listened to

- write a word like “مسمار” in a text file, or just use the word as the file name

- the last character “ر” will appear as the first one like this: “رمسما”

- this bug appeared only since r26019

- when reverting to r26018 the bug won’t show up

- for some combination of letters like “دليل” the issue happens for the last 2 characters

- for some other words the problem doesn’t happen at all

- the only common case is that this happens only with last word in a line appearing on the viewport

Whenever the HOLD switch is turned off, the hold icon in rockbox disappears, but hold actually doesn’t let go. I can’t use any keys until scroling is used. Scrolling left or right is the only thing that actually switches off hold. It can be pretty annoying as I use HOLD a lot.

The patch makes Rec+Vol{Up,Down} in wps and list (main menu) contexts chage backlight brighness. Just like with volume, brightness value is saved in config file. I find this feature quite useful when player is used both indoors and outdoors, eps. on sunny days.

Keymap changes are for Sansa C200 only. Check apps/keymaps/keymap-<you-target>.c and add necessary lines to button_context_{standard,wps} if you use different device.

Diff against SVN revision 22666.

Key lock (activated by pressing Power in the WPS) deactivates when music playback stops (end of playlist). The keypad then becomes active again. It shouldn’t get activated until Power is pressed again.

This patch adds a per-thread runtime variable which indicates the ticks the particular thread has been running.

This can for example help identifying threads that occupy the CPU for a long period of time.

Languages like Thai use combining diacritical marks which display above or below the adjoining character. When text scrolls off the screen, the text jerks back and re-scrolls what seems to be the width of the diacritical mark. It seems that the scrolling algorithm is counting the width of the diacritical mark, where it should be ignored.

This small patch adds a “jump to time” function to wps context menu. After clicking on jump 2 time item user, can specify time in mmmss format E.G:
- 130: jump to 1:30 in currently playing track
- 90: jump to 1:30 in currently playing track (shorter version of previous example)
- 1529: jump to 15:29
- 12345: jump to 123:45 (2 hours, 3 mins, 45 seconds)

I use it to easily transfer “last played position” time from computer to rockbox. Can be useful for audio books listeners.

This patch will make an e200 present its SD card as an ipod mini 2G when queried by iTunes. It does this by changing a number of things:

1) Responding to SCSI inqueries
2) Using Ipod USB vid/pid and other usb details

The patch also enables logf for the usb_storage.c because I’m in a bit of a hurry.

To use this, make sure you have a partition on the SD card of type 0 (any size should do) and also the appropriate Ipod file structure (can be generated with e.g. gtkpod).

Hi there! I'm having a huge problem with the rockbox boot on an iPod classic 5G. I've selected a number of option in the tagcache settings, such as 'load to ram', and after it readed all the files (30GB of music) ask me to reboot, and finally it freezes on the message 'saving tagcache' [1/9], responding only when i press menu+select for reboot. The same for the usb connection. I can't manipulate the files in any way!

Please excuse my limited English. Greetings from Argentina and congratulations for the fantastic project!

The attached patch slightly modifies the keymap of the H300 non-LCD remote to allow access to the browser from the WPS (by use of LONG PLAY).

I know that it works ok from an H300 with a non-LCD remote, but I don’t know if I’ve broken the LCD remotes completely.

Please could users of both the H100 and H300 LCD remotes try this patch and tell me that the WPS context keymap is unaffected. For reference, you can see the intended mapping here: http://www.rockbox.org/twiki/bin/view/Main/KeymapIriverHSeries

- What behaviour you are seeing

Rockbox 17612-080523 on an iRiver H340 skips entire tracks, and also skips within tracks, when the battery level falls below 30%

- What behaviour you expected

No skipping.

- How to reproduce the bug

Allow the battery level to fall below 30% and start playing a directory of files. Some files will be skipped, some files will have parts skipped in the middle.

- The SVN revision you are using and if possible the particular SVN revision in which you think the bug was introduced.

17612-080523, no idea when the bug started.

If you need any further info on this bug, please ask and I’ll give more details. I have no other hardware to test whether this behaviour occurs on other Rockbox platforms.

This patch changes the iriver H300 series bootloader's power and usb handling. When a USB or Power plug are inserted into the H300, it will now boot as normal, not stop in the bootloader usb/charging modes. This was mainly for use in my car, but is also helpful for people with charging cradles for their computers.

Forum thread can be found here http://forums.rockbox.org/index.php?topic=17202.0

Please refer to forum post for full exchange: http://forums.rockbox.org/index.php/topic,52518.0.html

In summary playing ALAC will crash the unit, other codecs not as much. My reasoning is (as contained in the forum post):

Converting some of my ALAC collection to FLAC to test has given excellent results = no crashes. I am suspicious of the ALAC decoder; watching the VIEW BUFFERING THREAD there seems to be consistency:

OGG/MP3/FLAC/WAV: CPU Frequency goes up to 124 until pcm: becomes full, then drops to 45mhz and pcm: hovers (it is always active) near the top of 100%. Upon track change the cycle starts again (124mhz until pcm: becomes full). I don't seem to get crashes.

ALAC: CPU Frequency goes up to 124 until pcm: becomes full, then drops to 45mhz and pcm: quickly goes down (takes about 2 seconds) to 75%, then cpu switches to 124mhz to get pcm: back up to 100%. This goes on constantly (cpu high - low cycle) while a single track/file is playing. I am now believing this cpu going up and down constantly gives me the crashes. Note on crashes: I don't know when they will happen, sometimes after a minute or two, sometime after 10 minutes , there is no pattern I can tell.

I am having a couple of problems with Rockbox on my iRiver H140.
The first issue is that all my songs in the files folder are displaying only in the order
that they were uploaded onto the machine. If I go into the settings and choose to display
Artists in alphabetical order it doesn't have any effect! I am left to endlessly scroll through
the names or listen through the iriver player which doesn't play WAVs or FLACs so i can't access everything.
Secondly, if I start up and resume playback of an album it doesn't then allow me to access the files folder when I navigate to it. I have to then restart my player and go to files from there. If I later come out to the main menu and choose Files, or any folder for that matter, it won't open. It's really frustrating. Any ideas of a fix?

I am trying to use the last method mentioned on the ipodpatcher wiki page to write Rockbox directly into the OSOS image on my iPod Nano2G. Sometimes it works properly, but other times it fails saying that it couldn't read the header from the .ipodx file. I am following the instructions exactly, so that can't be an issue. I have tried hexediting the .ipodx file, and in some cases I can get ipodpatcher to read the header by editing the first four values, but this always causes a Checksum Error. Here is the exact output:

C:\Users\Michael Marley\Downloads>ipodpatcher.exe -wf rockbox.ipodx
ipodpatcher 5.0 with v4.0 bootloaders (v1.0 for 2nd Gen Nano)
(C) Dave Chapman 2006-2009
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

[INFO] Scanning disk devices… [INFO] Read XML info (4 bytes)
[INFO] Ipod found - 2nd Generation Nano ("winpod") - disk device 1
[INFO] Reading partition table from \\.\PhysicalDrive1
[INFO] Sector size is 2048 bytes
[INFO] Part Start Sector End Sector Size (MB) Type
[INFO] 0 63 48194 94.0 Empty (0x00)
[INFO] 1 48195 1982462 3777.9 W95 FAT32 (0x0b)
[INFO] Read XML info (4 bytes)
[INFO] Ipod model: 2nd Generation Nano ("winpod")
[ERR] Failed to read header from rockbox.ipodx
[ERR] –write-firmware failed.

Neither of the tools, ipodpatcher or Rockbox Utility 1.4.0, work on macOS Catalina.

Catalina removed 32bit support.

Using ipodpatcher generates the following error:

bash-3.2$ ./ipodpatcher
bash: ./ipodpatcher: Bad CPU type in executable

And Rockbox Utility has a white circle with a line through it indicating that it does not work with this version of the OS.

(see attached file)

This patch implements HAVE_LCD_SHUTDOWN functionality for Photo and Color iPods. It is in response to issue 2 in http://forums.rockbox.org/index.php?topic=20994 : “2. The LCD screen on the iPod is not cleared properly when I shut down rockbox. I see 1-2 horizontal lines remain on the screen (which do fade after a minute or so). Nothing is wrong with my IPod’s LCD screen as I did not experience this with Apple’s Firmware”

It seems the Color iPod can have 4 different LCDs. They’re detected via two GPIO bits in lcd-color_nano.c. Types 0 and 2 are the old LCD with an unknown controller and they use the same init, shutdown and update procedures, and they are reported as 0. Types 1 and 3 are similar to HD66789R. They have different init and shutdown procedures but they share the same update procedure. Both 1 and 3 were reported as 1 earlier.

To see what LCD type you have, from the main menu go to System → Debug (Keep Out) → View HW Info and then see the number after “LCD type:”.

This patch has only been tested with LCD type 3 so far.

I am submitting this as a patch because I feel it is not a significant bug. Theoretically, the DC voltage that’s left can degrade the LCD, but the line fades quickly and no negative after-effects were reported.

I would like to also add LCD initialization code and develop HAVE_LCD_SLEEP functionality.

This patch enables display vsync on the iPod Nano 2G, currently only for the Type 1 (LDS176) display. It removes tearing and can make animation smoother. However, right now it uses an extremely CPU-unfriendly method of waiting for synchronization, which makes the display quite slow in some circumstances. I hope to implement DMA to copy the framebuffer, which should help somewhat. However, I am probably going to need some help to do this.

TheSeven gets all the credit for this patch, since he found where the Tearing Effect (vblank) signal was connected to the s5l8701 and wrote the vsync code. All I did was drop it into the display driver in the right spot.

I’ve been using the latest dev builds everyday for iPod Nano 2G and still encountering “Swapped Channels” on Playback (e.g. Left Channel → Right Headphone / Right Channel → Left Headphone).

Used latest build 5785cfb-120625

The version 3.10 is stable and everything works fine, but since I upgraded to the last version 3.11 or the daily build the ipod crashes and I can't mount the device in the computer, the charging doesn't work either.

When plugging in an AC USB charger, the ipod shows rockbox's disk mode instead of just changing the "external power" icon. Is it possible to make it detect if a charger is connected, or an usb host (for example, a computer)?

Doing the same test (with the same charger) on an ipod color/4g shows the expected result (not going to usb mode, just a charger icon appears)

Build is r23841 and earlier.

Occasionally when I reboot to the iPod firmware, something has caused the previously unset alarm setting to be enabled and the playback mode is set to shuffle. This doesn't happen with every reboot, but does more than 50% of the time.

Steps to duplicate:

1. Disable the alarm and set the shuffle mode to "None" in the iPod firmware.
2. Reset and boot into Rockbox
3. Listen to a few tracks
4. Reboot into the iPod firmware and check the shuffle mode and alarm settings.

I can't confirm 100% yet as to the time on the alarm being reset as well, but it does seem to consistently read 6 AM - which is a bit of a shock if I've been listening in Rockbox during the day and then I reboot into the Apple firmware and dock in my iHome, expecting to sleep in late on the weekend.

I have an iPod 4G Grayscale (model A1059) running Rockbox 3.14 with an Apple FM remote (model A1187). The remote part works ok (Play/Select and Fwd/Rev buttons work - volume control is separate due to it being connected to the line out, but works).

However, the radio menu does not show up in the main menu when connected. Not when I boot with the remote connected, not when I connect it after booting, and not if I go to a different menu and then back.

In the debugging menu, it simply says that the FM tuner hardware is not found.

I am sure that this used to work at some point. Are there known regressions?

External/USB adapters are not correctly detected on my Classic 80Gb, this patch detects it so car mode functionality now works, also the iPod is powered-up when USB cable is inserted.

The function power_input_status() returns USB charger when both external and USB chargers are present. It is possible to detect the external adapter when USB cable is plugged but it is necesary to poll the PMU (not IRQ safe), and i think this information is not currently used at all.

Hi,
I've been using the development version of Rockbox in my ipod classic 6th generation for about two years I think, but from some time, like a month or two, I'm experiencing playback issues as the track I'm listening suddenly skip forward or backward, or even jump for a few seconds on another mp3 file inside the ipod I was just listening before. I don't think is a ipod issue because I can listen the file inside the ipod with my computer player without problems.

There some way I can check older development revisions for the classic? It appears that it doesn't show in the dev build link on the site because is not fully supported. Thanks

After setting the “Charge During USB Connection” Rockbox setting to “no”, the battery in my iPod Classic still gets charged whenever connecting the iPod to my PC via USB. From the iPod Video manual:

“This option lets you control whether the player should charge during the USB connection and hence draw the full 500 mA. Turning it Off is recommended if the player is connected through an unpowered USB hub or a laptop port.”

I would expect the battery NOT to get charged. Running Rockbox dev build 9576134.

Rockbox Daily Build rev 085c10 (2013-01-30)
120gb 7G iPod Classic.

When I connect my rockboxed iPod Classic via Line Out (Apple Dock or Fiio Line Out Adapter) I’m getting heavy distorted with clipping an low volume sound. Headphones out its working while connected to the dock.

Same reported in the mailing list (http://www.rockbox.org/mail/archive/rockbox-archive-2012-10/0006.shtml). Stock firmware, and rockboxed iPod Video (5.5G) working with the same setting.

I have no programing knowledge, but I’m willing to help!!

Hi,

I have installed Rockbox build 0F89B04-160628 using this (https://files.freemyipod.org/~user890104/bootloader-ipodclassic.html) method.

I have created a dynamic playlist (Database > long select artist > current playlist > Queue Shuffled). Play and then pause the music and then hold the play button down to shutdown rockbox. Plug in USB cable from your computer (Win10) in to the iPod and the iPod should start powering on and then a white *panic* screen should appear.

Workaround is to have Rockbox already fully booted before plugging in a USB cable from the computer.

The iPod Classic Cirrus CS42L55 DAC+amp chip is specified to output audio up to +12dB versus the reference level (0.775V RMS) and the current Rockbox driver implements this accordingly (note that the OF limits the amplification to a lower level).

However, any amplification above +3dB applied to a 0dB signal results in serious clipping errors, the sound being distorted (oscilloscope measurements attached). This is not a surprise, given that +12dB translates in over 8V peak-to-peak output, way above what the iPod is capable of with its 3.7V battery.

Distortions aside, +12dB can be overkill for most of the earphones (depending on the sensitivity) and not a very pleasant experience. If you put the iPod in your pocket and forget to lock it you may experience this frequently.

In practice not all tracks have peaks reaching the 0dB level (actually nowadays this is quite common given the "loudness war"). To provide some room for additional amplification when needed, I found the +6dB limit to be a good compromise.

If your Ipod accessory doesn’t work with rockbox, you can report it here.

Please put your device name, Ipod model, and tested rockbox version in your post. If some but not all features work, be sure to mention that in your post.

Edit by rasher:
You should also add your results to this page page: http://www.rockbox.org/twiki/bin/view/Main/IpodAccessories

For any developers who might work on IAP support, please add patches to this task, so potential testers are notified.

Here is a preliminary patch for TV out on a 5th generation iPod. Play a BMP file and TV out will activate. NTSC is the default. If the file has 576 lines, the output will be in PAL. The image stays until another is loaded or TV output is disabled via the debug menu..

The following formats ought to work:
720×480, 24 bpp for NTSC
720×576, 24 bpp for PAL
Many programs including Windows Paint and ImageMagick convert can write such files. Other resolutions and bit depths may work. For example WPS background screens display properly but other WPS bitmaps don’t.

Known issues:
- More work needs to be done to integrate this with Rockbox. No, you cannot view the Rockbox interface, JPEGs or mpegplayer output yet.
- When the LCD is updated, there is a temporary disturbance on TV output
- http://en.wikipedia.org/wiki/Macrovision#Analog_copy_prevention is enabled. Yes, the hardware can disable it, but I haven’t figured out how to do that yet.
- The original firmware probably outputs images differently. It can load programs into the BCM which perform decoding there, and that is probably faster.

Hi all!
After 3.10 update I usually get my player frozen with usb plug icon if I connect it to any USB host while the player is off.
Steps to reproduce the issue:
1. Power off the iPod.
2. Plug it to Usb host. (tested with mac and Android)
3. Wait the system to boot.
4. It freezes with usb connect icon (no menu bar). Only holding Menu+Select help.

Thanks. Great firmware!

This occurs on Stable 3.8.1 and all builds currently up to Tuesday, May 10, 2011 (r29850-110510).

When my iPod 3G is powered on with no song in the queue to be resumed, and the "resume Playback" item is selected, the screen flickers, the quick glimpse of the selected Now Playing theme can be seen (for me, DancePuffDuo, but also confirmed for every other one I've tried) and it returns me back to the Main Menu without any warning… just an abrupt return.

I've reinstalled stable as well as various builds leading up to the date above and all have the same effect.

The way to reproduce this bug is to Play a single song from the database that is by itself (in the artist/album category of your choosing, or, the last song in an artist/album grouping) and then, after it is done playing and returns you to the database or main menu, shut down and restart Rockbox. Select the Resume Playback item on the Main Menu. The screen should flicker and abruptly return you to the Main Menu without any warning that there is nothing to resume playing.

This bug does not reproduce with the iPod 3G simulator with 05/10/2011's build (r29850-110510).

The rockbox behaviour when plugging in a firewire cable is to automatically reboot into disk-mode, preventing charging whilst running rockbox.

rockbox 3.5: ipod doesn’t recognize the connection of usb. i understand that rockbox doesn’t support usb on a 3G ipod, but it would be nice to boot into disk-mode like it does for firewire.