I downloaded some AAC files from the bbc, using the get-iplayer utility. The files play just fine on the computer, but on my rockboxed Clip+, they seem to freeze up the player entirely. I have to hold the power button for a long time to reset it. I just tried updating to rockbox 3.9, but I'm not seeing any difference with the new firmware.

When I play the file in mplayer, it gives the following info:
major_brand: M4A
minor_version: 512
compatible_brands: isomiso2
encoder: Lavf52.64.2
========================================================================Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding)
AUDIO: 44100 Hz, 2 ch, s16le, 48.0 kbit/3.40% (ratio: 6000→176400)
Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio))

By default, whenever you choose the <All Tracks> option from the database menu, the list of results returned defaults to the standard track name format, i.e. “%02d. %s” tracknum title. What I wanted was to be able to define the format that gets applied to the <All Tracks> option, dependent on the current menu level. So for example, if I had browsed to genre→artist→<All Tracks> it would return the list of all tracks for all artists for the given genre and I wanted the track names to be formated with:

       	"%s %s %02d. %s" artist album tracknum title

and then sorted into order, since I already know what genre the tracks are for.

Similarly, if I simply browsed to genre→artist→album→<All Tracks>, it would return the list of all tracks for the selected genre and artist, but I want the track names to be formated with:

"%s %02d. %s" album tracknum title

so when it’s sorted, I get the tracks grouped only by album and tracknumber, since I already know what artist the tracks are for.

This patch attempts to address this issue by allowing users to define custom <All Tracks> formats in the tagnavi_custom.config file. Thus, sort order can be controlled by how you format the track names, just as it works in base Rockbox.

The premise behind the code is that if the <All Tracks> menu option is chosen, Rockbox will look for formats with a certain naming convention defined by concatenating the tag names of the parent menu levels with “.” characters and finally appending an “.All” identifier. So in the first example above where we had browsed to genre→artist→<All Tracks>, Rockbox will look for all formats called:

"genre.artist.All"

and then cycle through them to see if the appropriate clauses defined on the format are met. Similarly, for the second example where we had browsed to genre→artist→album→<All Tracks>, Rockbox will look for the format called:

"genre.artist.album.All"

As in base Rockbox, it will cycle through all applicable formats and apply the first format it comes across that meets all the clauses defined on the format. One minor change I had to make to get the relevant tags loaded for the search results was to add the tags defined in the clauses of all matching format names to the tagcache search, but not add the clauses themselves.

So now, in the tagnavi_custom.config file to illustrate the first example, I have defined 4 formats called “genre.artist.All” to format the final display name based on whether the artist/album tags are actually defined on the mp3’s in the database.

%format “genre.artist.All” “%s - %s - %02d. %s” artist album tracknum title ? artist !~ “<Untagged>” album !~ “<Untagged>” tracknum > “0” %format “genre.artist.All” “%s - %02d. %s” album tracknum title ? album !~ “<Untagged>” tracknum > “0” %format “genre.artist.All” “%s - %02d. %s” artist tracknum title ? artist !~ “<Untagged>” tracknum > “0” %format “genre.artist.All” “%02d. %s” tracknum title ? tracknum > “0”

The downside of this approach is that in order to have this style of functionality for every <All Tracks> menu option, I defined a lot of formats. As such, I had to increase the maximum number of formats from 32 to 96 in order to cope with my formatting schemes. I also increased the maximum number of tag filters from 4 to 8. Now this obviously increases the amount of memory allocated for formats, which will have an impact on available audio buffer size. The attached tagnavi_custom.config file shows the various “All” formats I’ve added and it’s pretty comprehensive in the way it handles missing tags, so technically, if your music library is properly tagged, you should never need all of the formats so you could easily reduce the maximum number of formats.

My principal concern with this patch is in terms of the memory usage of increasing the maximum number of formats and number of tag filters allowed. I’m not aware of a memory profiler for cygwin, but then I hadn’t used cygwin before playing with Rockbox - so any pointers would be helpful.

The second piece of functionality I wanted was in the handling of the “strip” functionality. Base Rockbox has an all or nothing approach; if the global format found for the list of tracks contains a strip modifier, then it applies the strip to ALL track names, even if the subsequent formatting of the track does not contain a strip modifier. I wanted Rockbox to only strip tracknames if a strip modifier was defined on the format that is applied to the track. This patch fixes this problem.

This works fine on my Sansa e280 with a full 8Gb drive and a full 2Gb micro-SD card. It’s formatted close to 1000 tracks with no noticeable difference in processing time, and I’ve not come across any out of memory errors on my e280, but I haven’t tested it on any other mp3 player so I would recommend you test this first using the appropriate simulator.

Note that this patch incorporates the year album patch  FS#8051  as the code is all tied up in the same files.

Both issues seem to appear with any version of my theme and with any build.
Let's try it with the latest version 1.30 of my theme (in attachment but also here: http://themes.rockbox.org/index.php?themeid=1585 ) and a recent build (I use version: 0c4bd3a-120406)

-Theme loading

When you load the theme for the 1st time, the WPS will never load properly (failsafe). The workaround is to turn off the device and turn it on again and then the WPS will always load properly until you reload the theme for some reasons (trying another theme and revert back to mine etc).
I tried both with the full theme version and this "light" version of WPS: http://pastie.org/3747546

-USB connection (tested on Windows 7, with or without a microSD, and there isn't such an issue with the other themes)

If I plug the USB cable while the player is on or off, it will almost never mount properly.
Usually the USB screen appears on my SBS, the computer recognizes a USB device is connected but either nothing appears in "my computer" or the device appears but is not accessible. When I unplug the USB cable, the Zip gets stuck on the USB screen and only reset can turn it off.
Sometimes it even displays some erros like that when plugging the USB cable: "data abort at 30FSR 0x8 (domain 0, fault address 0x964176 bt pc: 0x3006AC3 bt end" , sometimes it doesn't display the USB on SBS but gets stuck on the main menu.
And rarely in the same conditions it also mounts properly…

Like for WPS, I made a "light" version of SBS without the status bar and that way the Zip seems to mount and unmout properly every time!
http://pastie.org/private/cauhxelaip7hrpqpcwdbxw So maybe a tag in the status bar causes the issue with USB connection?

This flyspray task will hold the development of a potential usb audio driver for rockbox.
It will also serve for the development of the isochronous transfer support support in usb code.

Hi,
I am using a Sansa Clip Zip with Rockbox 3.13.
I’ve noticed, when I lock or unlock the device, the message, which indicates the current state, does not disappear completely. Its still there.

Cheers,
Conrad

There is a bug with the clip zip that when you plug a device in for the first time it doesn't install succesfull the driver and when i unplug it the device crashes and needs a hard reset

Hi there,

  this is a WIP plugin that I wrote last year.  It plays amiga music using the UADE library.
  You can find more about it here: http://zakalwe.fi/uade/

  I'm a bit new to git so please forgive me for not uploading a proper patch.

  To test the plugin, simply copy the bitmap and rockuade folders to the plugins folder in
  rockbox sources.  And you have to extract the data.zip file in the .rockbox folder.

  I'm not going to work on this anymore, so I decided to upload it here, and hope someone
  can make a proper patch and maybe some dev would be interested in testing it, make 
  the necessary changes and upload an stable release.

  Please read the README file for some additional info about the plugin.

  Tested on:    samsungypr0, fuze+, fuzev2
  Commid ID: e1ea08417bca57c607df6686472fa0a86f38b6d1

Over the past month? the radio menu has been disappearing. When I reinstall the menu comes back and the radio works and the debug screen shows the radio.

When it re-initializes the DB, the radio disappears and the debug screen said that there's is no hardware.

If I manually deleted the DB files, the radio comes back…

A few other people on anythingbutipod forum have mentioned the same issue.

Still an issue August 1, 2007: r14133-070801

In FAT, file name can have max 255 characters (not bytes).
A file name that have 255 characters(contains many multibyte characters) is listed in File menu, but playback can’t.

Using patched firmware\include\file.h as a test, MAX_PATH 260 up to 520, rockbox can playback the long name file.
But, changing theme causes PANIC.

I upgraded my Sansa Fuze V1 (AMSV1) from the current stable release 3.11.2 to Daily build (ad46064-120710). With Rockbox powered on, any attempt to connect USB to my WinXP fails. The USB icon is displayed briefly, followed immediately by the white screen - Undefined Instruction at 0000003C. This is repeatable. Recovery is via a power down.

Note: the USB connection works fine with the current stable release 3.11.2 and this is the first daily build I have tried,

Rockbox Info: Version: 3.12

Device: iRiver H140, 80GB Toshiba MK8009GAH 8mm 1.8" IDE HDD 8mm

BUG: Repeatable, Consistent.

Additional Information:
1. To verify that I had a good installation of the 3.12 version of the Rockbox firmware working, I have reformatted, and re-flashed rockbox 3.12 two seperate times after initially encountering this, duplicating this behavior. So it doesn't seem to be a bad firmware flash.

Expected Behavior:

1. Player should Power On and boot properly every single time the bootup sequence is initiated correctly (Play Button pressed when Player is in a Powered Off state).

Buggy Behavior:

1. Player Powers Up, then locks up (i.e. "crashes") during bootloader sequence, requiring a hard reset, and upon second boot, finally Powers On and boots properly, bringing up a functional session of the Main User Interface. This is repeatable, and consistent.

Bug Symptoms & How To Repeat:

1. Consistently the Player will lock up during first "boot" sequence. The bootloader will usually reach the text stage, and sometimes crash here. Sometimes the bootloader will get through the text stage and reach the Rockbox Logo and then crash here. The Main User Interface is never reached upon first "boot" sequence.

2. The result of the first "boot" lockup (i.e. "crash") requires that I reset the Player by inserting a paperclip into the Reset hole (on the bottom plate of the Player) and triggering the button hidden in there. This Powers Down the Player, and Resets the Firmware, leaving the Player ready to be Powered On again.

3. Upon the second "boot", the Player will "boot" and the bootloader will make it past the text stage, the Rockbox Logo stage, and then spin up the HDD properly; the bootloader will not lock up the firmware, and behaves 'normally', finally resulting in a completed boot up sequence with the Main User Interface coming up (as a user would expect). The Player is now ready to use.

I navigate to any directory in the file tree, enter the context menu and set it as the recording directory. Then I go to the recording screen, cancel out immediately and return to the file tree.

There is now a new directory, in the same place as the directory I just set for recording. The new directory has exactly the same name except the final 3 letters have been removed, and it is this directory that has become the recording directory. The original directory is still there too, but now it does nothing.

The workaround is to create a bogus directory with 3 extra letters, then delete it once the bug creates the new directory with the truncated name.

Whenever the HOLD switch is turned off, the hold icon in rockbox disappears, but hold actually doesn’t let go. I can’t use any keys until scroling is used. Scrolling left or right is the only thing that actually switches off hold. It can be pretty annoying as I use HOLD a lot.

I am working on adding album art support for FLAC and Ogg files. FLAC looks straightfoward, but there is a design problem with Ogg.

https://wiki.xiph.org/VorbisComment#Cover_art

The struct containing the image and associated data is base64 encoded. I can't just set id3→albumart.pos to a location in the file like all other supported album art formats (and FLAC). Obivously I could allocate memory for the decoded base64 data, but it would have to be deallocated later to prevent a leak.

On IRC, nick_p suggested: "how about adding a new id3 struct element id3→albumart.base64_encoded=true and decoding it when needed on the fly?" This sounds like a good idea, with one issue: it's not the album art alone that is base64 encoded, but the data struct described here:

http://flac.sourceforge.net/format.html#metadata_block_picture

I can test to see if I can parse the beginning of the base64 block, then set the pos pointer to the middle of of the block (with the id3 struct addition) and see if it will still decode.

With my 5th generation iPod, if I connect USB while the hard drive is spinning, I often get full speed mode instead of high speed mode. This testing is with 00b8563, but I’ve observed the same problem in the past. Here’s the relevant part of Linux 3.8.0-21-generic dmesg output:

[26644.712035] usb 2-2: new high-speed USB device number 18 using ehci-pci
[26644.904471] usb 2-2: device descriptor read/all, error -71
[26644.965905] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.967780] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.968004] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.971577] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.973440] ehci-pci 0000:00:1d.7: port 2 reset error -110
[26644.973459] hub 2-0:1.0: hub_port_status failed (err = -32)
[26645.176048] hub 2-0:1.0: unable to enumerate USB device on port 2
[26645.428038] usb 6-2: new full-speed USB device number 8 using uhci_hcd
[26645.979070] usb 6-2: not running at top speed; connect to a high speed hub
[26646.009069] usb 6-2: New USB device found, idVendor=05ac, idProduct=1209
[26646.009076] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26646.009080] usb 6-2: Product: Rockbox media player
[26646.009083] usb 6-2: Manufacturer: Rockbox.org
[26646.009087] usb 6-2: SerialNumber: 100000000000A270014B32BEB
[26646.024242] scsi21 : usb-storage 6-2:1.0
[26647.038109] scsi 21:0:0:0: Direct-Access TOSHIBA MK3008GAL BU11 PQ: 0 ANSI: 4
(I’ve removed the remaining USB storage messages because they don’t seem relevant)

If the hard drive is not spinning, I get high speed mode. However, there is a disconnect and the device is detected twice:

[27356.784126] usb 6-2: USB disconnect, device number 9
[27371.208044] usb 2-2: new high-speed USB device number 24 using ehci-pci
[27371.347053] usb 2-2: New USB device found, idVendor=05ac, idProduct=1209
[27371.347058] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27371.347062] usb 2-2: Product: Rockbox media player
[27371.347065] usb 2-2: Manufacturer: Rockbox.org
[27371.347069] usb 2-2: SerialNumber: 100000000000A270014B32BEB
[27373.079038] scsi25 : usb-storage 2-2:1.0
[27373.337244] usb 2-2: USB disconnect, device number 24
[27373.640029] usb 2-2: new high-speed USB device number 25 using ehci-pci
[27373.779220] usb 2-2: New USB device found, idVendor=05ac, idProduct=1209
[27373.779226] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27373.779229] usb 2-2: Product: Rockbox media player
[27373.779233] usb 2-2: Manufacturer: Rockbox.org
[27373.779236] usb 2-2: SerialNumber: 100000000000A270014B32BEB
[27373.820382] scsi26 : usb-storage 2-2:1.0
[27374.823266] scsi 26:0:0:0: Direct-Access TOSHIBA MK3008GAL BU11 PQ: 0 ANSI: 4
(Again, I’ve removed the remaining USB storage messages because they don’t seem relevant)

I get the same behaviour regarding high speed vs. full speed mode in Windows 7, but I’m not aware of Windows reporting other USB errors anywhere.

I was sometimes having USB difficulties that seemed to be due to contact oxidization or dust from not using the dock connector in a long time, but I don’t think that’s the cause here.

I’m attaching USB traces from WireShark using Linux usbmon. In both cases I removed all the USB mass storage stuff after get max lun because it seems irrelevant and increases file size a lot. When the result is full speed, something goes wrong after the set address response. When the result is high speed, something goes wrong after the set configuration request. In both cases the first sign of trouble is an interrupt from the USB hub.

This is on a Gigabyte GA-P35-DS3R rev V1.0 motherboard with Intel P35 + ICH9R chipset.

When I use the "Wake Up Alarm" with the "Wake Up Screen" set to "Recording." my Nano turns on OK, but the screen starts on the FM screen. This is especially strange as there is no FM radio on this player.

I am expecting the player to turn on and start recording.

This is a 1g Nano running 3.9

Thanks.

Hello, all
There's a problem with viewing files in some circumstances in iPod 5.5G last 3.9 release.

When I:
playing something in /Music/Artist/Track.flac,
pause playback,
connect USB cable.
rename /Music/Artist to /Music/ArtistSOMETHING, then disconnect USB cable

I just cannot turn playback on ("~Do not exist" or something message appears, it's OK, I know),
BUT
when I trying to enter in "Files" menu - there's no reaction at all. Just nothing. I can't play of any other existing track or change to any directory without restarting device, or:

just go to Playlists → VIew catalog → select some playlist, then some music appears. But it's too long imho.

Is "it" bug or not?.. :)

Thanks,
sorry for my english,

It seems that operators are discarded when used in a tagnavi.config (or tagnavi_custom.config) format line condition.

For example,

%format “fmt_abtitle” “*%s - %02d:%02d” title Lm Ls ? playcount > “0” & lastoffset == “0” %format “fmt_abtitle” “%s - %02d:%02d” title Lm Ls Now if we used “fmt_abtitle” instead of “fmt_title” in the default tagnavi file, we would expect all tracks with a playcount greater than 0 and lastoffset equal to zero to be prefixed by three asterixes (*). Instead ALL the tracks with a playcount greater than zero are prefixed, leading me to think that the & lastoffset == “0” part is discarded. If I make the following change:

%format “fmt_abtitle” “***%s - %02d:%02d” title Lm Ls ? lastoffset == “0” & playcount > “0” %format “fmt_abtitle” “%s - %02d:%02d” title Lm Ls

Now all tracks with a lastoffset equal to zero are prefixed, which again proves that the and operator was clearly ignored and unparsed.

Hi, this is a codec pack containing all codecs based on blargg's
Game_Music_Emu library.

I have ported all code to C to work in ROCKbox, and i have replaced the
MAME versions of some emulators with others compatible with the GPL license.
It was a lot of work but i did it because i really love chiptune music and having the
possibility to listen to a lot of classic video game system's music in a small player
is really great ;).

Original Game_Music_Emu library here: http://slack.net/~ant/libs/audio.html

Tested on: Sansa Fuze v2
Created from revision: 30084

The following formats are contained in the pack:

- AY (ZX Spectrum, Amstrad CPC)
- GBS (Nintendo Game Boy)
- HES (NEC TurboGrafx-16, PC Engine)
- KSS (MSX Home Computer, other z80 systems)
- NSF, NSFE (Nintendo NES, Famicom)
- SGC (Sega Master System, Game Gear, Coleco Vision)
- VGM, VGZ (Sega Master System, Mark III, Sega Genesis, Mega Driver, BBC Micro)

Additional features:

- 44100 Khz, stereo playback.
- Support all sound chips in NSF/NSFE formats.
- Support MSX-AUDIO and MSX-MUSIC in KSS format .
- Support ADPCM samples in HES format.
- Support for extended m3u playlists created specially for

some chiptune formats.

Known issuses:

- Some (or all) codecs might not work in some targets, specially

if they have an small iram size, or if the codec is too cpu intensive, 
like VGM and KSS.

- Subsong change is not working properly, specially when it happens

automatically.

- Most vgz tracks will be truncated due to the small amount of free

memory available to uncompress them.

- Some SCC+ soundtracks might not work correctly.

** There might be several bugs and issues to be found yet, so please feel free to

  report them here or to my mail address.

Special thanks to:

- Shay Green (blargg) the original author of the great Game_Music_Emu

library.

- Chris Moeller (kode54) who made some nice improvements to the library.
- Mitsutaka Okazaki, author of the YM2413 emulator.
- The OpenMSX team for the YM8950 emulator.
- Stéphane Dallongeville for the YM2612 emulator.
- Joshua Chang, Haiku Konaru and everyone else who has helped me to

test the codecs.

When listing to a mp3 for some time there starts a massive random noise in the background. It will continue for some time when pausing or stopping playback and will also continue when starting another track.
I’ve noticed this when listening to a random list of mp3s of various sources and using speedup with 225% or 250%.

At the moment I’m using ee758c5 with my clip+.

Hi,

I’m experiencing an issue with WMA Pro playback on my Clip Zip.

I’ve got the lastest stable build of Rockbox 3.13. Files were encoded with dbpoweramp.

Some files playback normally, but majority of tracks skips. Always at the same point if not forwarding or rewinding.

Here’s a sample. The track skips at 2.15.

I would like to leave my player charging overnight and have it resume playback in the morning to wake me.

My player remains on when charging and cannot be turned off.

The alarm does not resume playing if the player is already on when the alarm time passes.

I suspect this probably applies to all players, mine is a Sandisk Sansa Clip+.

Rockbox info says v. 3.13 - the stable build grabbed by RockboxUtility, which this bugtracker doesn’t seem to know about yet.

Version: 3.13

Variable ‘tmp’ on line 565 is possibly not initialised (found by cppcheck).

Changing “Enable EQ” setting does nothing until the player is restarted. However, selecting an EQ preset does enable the EQ and take affect within a few seconds. With the new 3.13 presets I am working around this issue by simply selecting the “Flat” EQ config file to “Turn Off” the EQ. I have tried stopping playback and skipping around to other tracks forcing the buffer to refill. That doesn’t work.

I don’t know when the bug was introduced except that testing 3.11 on my Gigabeat F proved it WAS NOT present in 3.11.

I have verified the bug in 3.13 on all of these targets, so at this time I’m saying this affects all players.

Confirmed on Fuze v2, Clip v1, Clip +, Clip Zip, Gigabeat F

I’m using 42a725f, and after frequency scaling implementation, sometimes the player slowdown extremely, being unusable (don’t stop playing, only small gaps in audio occur).
Less frequently, the player freezes.

I noticed it’s happens more frequently if the device is just powered on, and hits play. If I wait a few seconds before resuming play, the freezes are less frequent.

- How often does this happen?
* Frequently, about 2 o 3 times a day (4 hour average playback time, with several shutdown/boot in the middle)

- playing which file format (mp3, ogg, flac, mpc, etc…)?
* Confirmed with mp3 and flac

- which lcd is your device?
*st7783

Player = Sansa ClipZip
Rockbox current build :

Key lock (activated by pressing Power in the WPS) deactivates when music playback stops (end of playlist). The keypad then becomes active again. It shouldn’t get activated until Power is pressed again.

The MENU key is mapped to close the Chip8 emulator, so mapping it to a Chip8 key is pointless. This makes some games unplayable.
This may affect other iPod models, I don’t know.

This is basically a documentation update. For several years I generated accessibility voice files on my devices. Then one day I was reinstalling and it would generate a lot of the voice files but die from a weird error. For more than six months I combed the manual and the forums, trying to figure out what had changed, trying to debug it myself. Eventually I stumbled across the problem. I had noticed the “install on player” option in Rockbox Utility and started generating voice files while running from the player. Once I switched back to running Rockbox Utility by launching the utility from my regular PC disk, everything worked again. I again looked for any warning about this in the manual, and didn’t find anything.

The simplest fix is to include something about this in the section on accessibility and generating voice files.

Another fix, probably not worth it, would be for the voice files to use system tmp space for intermediate files. I suspect that the recursive generation of talk files on player ends up in some infinite regression as it generates talk files for temporary files.

This probably happens on all players, but I only experienced it on the iPod Nano 1st Gen.

Rockbox Daily Build rev 085c10 (2013-01-30)
120gb 7G iPod Classic.

When I connect my rockboxed iPod Classic via Line Out (Apple Dock or Fiio Line Out Adapter) I’m getting heavy distorted with clipping an low volume sound. Headphones out its working while connected to the dock.

Same reported in the mailing list (http://www.rockbox.org/mail/archive/rockbox-archive-2012-10/0006.shtml). Stock firmware, and rockboxed iPod Video (5.5G) working with the same setting.

I have no programing knowledge, but I’m willing to help!!

I’m having weird problems with a 160Gb 6G Classic (yes I know it’s unsupported/unstable).

With emcore and rockbox it works fine. Connecting it to my computer the USB works as expected and everything is great (copied 100Gb+ of music to it with no trouble).

However… when I connect it to either of my cars (via USB), the iPod shows the USB screen for a few seconds then goes back to the Rockbox menu and locks solid. It then needs a MENU+Select to reboot it.

Using a USB flash drive in both cars (different head units) works fine and I can navigate around the filesystem and play music. I did notice that the flash drive was partitioned, not ‘superfloppy’, so I setup my iPod with 1 partition and stuck rockbox on that…. didn’t make any difference though.

Someone suggested that the head units (Kenwood and OEM Jaguar) might be detecting the device as an iPod from the USB ID and then ‘doing something special’. So I compiled my own rockbox from git source changing the USB ID and VENDOR to 0001. I then verified the change by doing a lsusb on my Linux box and the ID showed as 0001:0001.

Sadly this makes zero difference to the iPod’s behaviour when connected to my car(s).

Does anyone have any suggestions? I’m happy to recompile, grabs logs, insert code etc

Here’s the rockbox-info.txt from the one I built:

Target: ipod6g
Target id: 71
Target define: -DIPOD_6G
Memory: 64
CPU: arm
Manufacturer: s5l8702
Version: 189148eM-130128
Binary: rockbox.ipod
Binary size: 646268
Voice format: 400
Actual size: 646260
RAM usage: 1755172
Features: accessory_supply:backlight_brightness:crossfade:dircache:headphone_detection:hold_button:hotkey:lcd_bitmap:lcd_non-mono:lcd_color:lcd_sleep:morse_input:pitchscreen:quickscreen:rtc:swcodec:tagcache:tc_ramcache:charging:usb_charging_enable:wheel_acceleration:lineout_poweroff:large_plugin_buffer:albumart:disk_storage:scrollwheel:usb_power:usbstack:hardware_click
gcc: arm-elf-eabi-gcc (GCC) 4.4.4
ld: GNU ld (GNU Binutils) 2.20.1.20100303
Host gcc: gcc (Ubuntu 4.4.3-4ubuntu5.1) 4.4.3
Host system: Linux

Sometimes my Clip Zip gets in a state where I can resume playback after booting it but then it doesn’t let me seek anymore (seek thingy still moves but then jumps back to where it was, playback is totally unaffected which in this case is bad of course). I also can’t pause or skip. I can go back to the main menu but I can’t move the cursor or go back to the WPS. When I go into the playlist by long-pressing down, the list usually appears but is not functional although here I can usually move the cursor up and down (sometimes I only get a kind of frame but rendering freezes at that point). Trying to shut down lets the “shutting down” popup appear but that’s it.

I seem to remember that going via “recent bookmarks” once was a workaround but in the current state this doesn’t work either.

This broken states persists between shutdowns (or well, switch-offs more like since shutting down doesn’t work). I also tried to recreate the playlist but that didn’t help either so I’m currently stuck with a player that will play but I can’t it make change what to play. I will also have to listen to the same podcast over and over again since no new resume position is saved.

The build I use is 42a725f.

Oh and sorry I didn’t choose the right player. Couldn’t find any Sansa Clip in the list in fact :/

%px tag does not behave properly with large files. When playback reaches the time 11:55:50, then the %px resets (starting to show 0).
It’s more extensively described here: http://forums.rockbox.org/index.php/topic,42661.0.html

Hi there,

  this is another WIP plugin that I wrote last year.  It plays videogame streamed music
  using the vgmstream library. Original homepage here:
  sourceforge.net/projects/vgmstream/

  I'm a bit new to git so please forgive me for not uploading a proper patch.

  To test the plugin, simply copy the rockstream folder to the plugins folder in
  rockbox sources.  And you have to extract the data.zip file in the .rockbox folder.

  The formats.db found in data.zip is basically a list with all vgmstream supported
  extensions (at least "all" by the time I wrote the plugin).  You can add  or remove 
  new or unwanted extensions there.  The plugin will only handle the extensions found
  in the formats.db.

  Currently the plugin works as a viewer plugin, and there is only one extension associated
  with the plugin in viewers.config for testing purposes, but you can always use the 
  'open with' option from rockbox.  Once you open a file the plugin will parse all supported
  files found in the same folder.

  The vgmstream project is updated quite often, if someone wants to
  update the core library, I believe that would be very easy, since I only changed a couple
  of things to it.

  I'm not going to work on this anymore, so I decided to upload it here, and hope someone
  can make a proper patch and maybe some dev would be interested in testing it, make 
  the necessary changes and upload an stable release.

  As a last comment, I have only tested the plugin in the simulator, samsungypr0, fuze+
  and ipod nano. It only worked in the simulator and samsungypr0, so hope someone can 
  fix that.

  Please read the README file for some additional info about the plugin.

  Working on:  simulator and samsungypr0
  Commid ID: e1ea08417bca57c607df6686472fa0a86f38b6d1

Hi there,

  this is another WIP plugin that I wrote last year.  It plays videogame streamed music
  using the UADE library.  Original homepage here: sourceforge.net/projects/vgmstream/

  I'm a bit new to git so please forgive me for not uploading a proper patch.

  To test the plugin, simply copy the rockstream folder to the plugins folder in
  rockbox sources.  And you have to extract the data.zip file in the .rockbox folder.

  The formats.db found in data.zip is basically a list with all vgmstream supported
  extensions (at least "all" by the time I wrote the plugin).  You can add  or remove 
  new or unwanted extensions there.  The plugin will only handle the extensions found
  in the formats.db.

  Currently the plugin works as a viewer plugin, and there is only one extension associated
  with the plugin in viewers.config for testing purposes, but you can always use the 
  'open with' option from rockbox.  Once you open a file the plugin will parse all supported
  files found in the same folder.

  The vgmstream project is updated quite often, if someone wants to
  update the core library, I believe that would be very easy, since I only changed a couple
  of things to it.

  I'm not going to work on this anymore, so I decided to upload it here, and hope someone
  can make a proper patch and maybe some dev would be interested in testing it, make 
  the necessary changes and upload an stable release.

  As a last comment, I have only tested the plugin in the simulator, samsungypr0, fuze+
  and ipod nano. It only worked in the simulator and samsungypr0, so hope someone can 
  fix that.

  Please read the README file for some additional info about the plugin.

  Working on:  simulator and samsungypr0
  Commid ID: e1ea08417bca57c607df6686472fa0a86f38b6d1

Rockbox versions: all from 3.7 to 3.12

There are really loud and annoying digital squeaks during playback on some tracks only (wma 64-96kbps). Usually the noise occurs when one channel is silent or almost. The problem doesn't occur with the OF. It makes no difference where the song is stored (sd or internal memory). The same tracks play fine on the pc. I attach a portion of a song I've recorded while playing on the device where the noise can be clearly heard.

As the title suggests, fun things like: https://plus.google.com/102855057878446061693/posts/FkQ4wQZb8VD can happen in this instance.

Initially reported here: http://www.rockbox.org/irc/log-20130113#07:14:49

[Saint]

The Clip Zip's text viewer does not bookmark anymore. When holding down the Submenu and Select keys (which according to the manual sets a bookmark), no bookmark is created, and the screen flashes between the context menu and the text file instead. This bug has been confirmed by skip252 here: [ http://anythingbutipod.com/forum/showthread.php?p=629493&posted=1#post629493 ].

Rockbox build is the latest dev build at the time of filing [62de15f-130103].

Rockbox WebOS app.

Built on r31467, 32/64-bit Ubuntu 11.10, running on a 32GB Touchpad

Directions (only tested on the above):

* Install WebOS PDK: https://developer.palm.com/content/resources/develop/sdk_pdk_download.html

* Install platform-native libsdl-dev if you haven't already. Only needed to pass configuration check as the PDK doesn't properly install staging sdl-config for some reason.

* Apply patch (patch -p0 < filename.patch)

* cd webos

* ../tools/configure, select WebOS target (206)

* make && make install && sh ./buildpkg.sh

Notes:

* This is one big hack – I fudged just about everything in /firmware (how the target system works is still not altogether clear to me) and piggybacked a lot of this off of the SDL target. Mostly in the interest of getting it to run without adding ifdefs all over the place. Obviously we'll want to be more methodical and thorough about exactly which changes need to go where moving forward.

* The Touchpad's SDL video implementation appears to adjust orientation and scale output to fit within 1024x768 as best as possible. This means that a 800x480 build will appear in landscape mode, letterboxed, while a 320x480 will appear in portrait mode, pillarboxed. The device itself automatically orients to landscape – meaning, if you're in a portrait resolution and then you exit, everything will initially be sideways – but that doesn't affect input. Scaling routines are noticeably slow.

* I tried building this as a hybrid Enyo/PDK (window mgr friendly) app but had some problems with the native part failing to execute at SDL_Init. So for now no backgrounding or notification bar.

* Make scripts use the ARM compilers installed with the PDK. I'm wondering though if this is superfluous given that the Rockbox toolchain also supports ARM7. I did try exposing some of the ARM-specific assembly but the compilation failed with the PDK compiler.

800x480 build: http://www.jasonyu.net/webos/org.rockbox.raap_0.0.1_all.ipk

Sansa Clip Zip has big problems with Lossless files. BIG.

1) Flacs skips randomly, at every encoding level (5 or 8 it's the same) and it's impossible to reproduce this issue when I want. It skips to the next track randomly
2) Ape files stops to reproducing and makes a really big noise, this after 30 sec. or 3 min… or nothing at all.
3) Wavpack files, sometimes, stucks for 0.5 seconds and then, it continues to play. It happens to Fast encoding, or Normal encoding, it's the same.
4) AAC files make little noises and, sometimes, crash Rockbox.

Flac and APE problems, I'm sure, occurs from ages, I bought Clip Zip months ago and these problem occurred for every build and ofr every Rockbox release.

I don't think that my player's broken. These problems were previously posted by other people.

I think that the testing of builds were made too hastily, there are too many problems with lossless files. I can understand APE that requires an expensive decoding, but FLAC files couldn't have these problems :(

when rockbox startup, a loud popping sound will be produced to the output

if plug off the headphone before startup, and plug in on after startup, the popping sound also produced;

if plug it before startup and hear the popping, then re-plug the headphone will not hear any popping again(until i restart the rockbox)

There are some problems with the quickscreen on the Sansa Fuze. I traced it back to r31246, a text alignment bugfix:

- Quickscreen items flicker a lot and sometimes vanish for half a second on each change of an option.

- Setting the right option (Repeat) to "Shuffle" and then back to something else causes "Shuffle" to stick on screen. Leaving the quickscreen and returning to it reveals the correct setting.

This only happens for longer scrolling strings of text, e.g. "Shuffle" is "Zufallswiedergabe" in German.

This has been (slightly) discussed before, but this is a new take on the matter, not a repeat of  FS#10683 .

With this patch applied, the following functionality is recognised with the hold switch in place:

On any list/menu screen or the while playing screen;
pressing MINUS decreases volume by one,
pressing PLUS increases volume by one,
pressing MENU switches between Play and Pause,
holding MINUS skips back a track,
holding PLUS skips forward a track,
holding MENU advances to the next folder.

I feel that anybody using a Cowon D2 will find this functionality essential, not only because it is present in the original firmware, but because it is necessary for in-pocket operation.
With a small DAP like this, with tactile buttons as well as a touch screen, it makes sense to maximize convenience.

I have added as much functionality as I could without requiring pressing multiple buttons at once. I have made several similar patches and built them for members on the iAudiophile forums, and this configuration has consistently been the most popular.

I welcome any comments/suggestions.
-Andrew

Player: Sansa Clip+
FW: Rockbox 3.12, official stable build, but it happens on older versions too

While playing some FLAC file, RB skips to the next track automatically. I know there is a lot of similar bugs, but this is unique:)
Firstly, the problem is repeatable on my Clip. Skipping is always at one time, e.g. 00:19 for one file and 01:40 for other one. I think that these files are stored on corrupted part of SD card. OK, if it's corrupted then I have to buy a new one, but when I switch to original Sansa Clip+ firmware it play normally! At problematic places (00:19 or 01:40) there is a little 'click', but it continues to play. My conclusion is: if original FW handles such a files on bad memory, Rockbox should has workaround also.
Files are OK, when I copy them to internal memory, Rockbox plays continuously.
I didn't notice skipping of MP3 files on the same SD card, only with FLACs.
Computer players (e.g. AIMP) plays FLACs from this SD without any problems.

I've attached movies that presents the bug on 2 different tracks. Hope it helps.
http://youtu.be/0e4Xf8rKTh0 http://youtu.be/zl4LX4wEwlI

this is ordinary mp3 file.
I think it was name problem, renamed to simple.
Still not play.
Player Sansa Clip+ (not found in bug report menu)
Rockbox 3.12 (not found in bug report menu)
Standard firmware has no problem with this.
Good luck!

It is 16Mb size so I put it to my dropbox
https://dl.dropbox.com/u/17669498/rockboxbug/08.mp3

Daily build: c413591-120705 and earlies.
When I connect powered down my Fuze V1 and disconnect from USB, it hangs displaying USB screen. I must hold power switch for several seconds to power off player. Tested on two different machines with windows7 x64. When I connect powered on player everything works perfectly.

Android:
The Notification bar which use "Remoteviews" may be not suitable for some ICS Roms (see Attachment).
So I change the Remoteviews to "Notification.setLatestEventInfo" to display the track information.

The patch may have some offsets.

Device: Sansa Fuze v2 (stable port)
Rockbox Release: 3.12

Recently I have been noticing a problem with themes that allow radio station logos to be displayed on the FMS screen. This is most noticeable with the analog and Fuzemod themes. While the logo displays properly, other images on the screen do not. In the case of the analog theme, the VU meter appears corrupted and with the Fuzemod theme the battery animation, tuning bar slider and playmode indicator icons fail to appear as expected. This problem was not present when either of these themes was used with the releases before version 3.12. In fact this bug appears to have been introduced by one of the experimental daily development builds either in May or June. I have tried different sets of radio station logos and preset lists with these themes but I always get the same result when using version 3.12; everything is fine with any previous release. Since this problem occurs with two different themes along with any combination of radio station logos and preset lists, I can only conclude that it originates with the firmware.

I have attached to this report three generic radio station logos in bitmap format along with a generic preset list. You can put these into /.rockbox/fmpresets and try your own tests. Since the frequencies were selected at random, don’t expect them to tune in anything. Besides, there is nothing wrong with the ability of the Rockbox firmware to tune in radio stations or play their music. The problem starts as soon as the user starts flipping through the station presets, so don’t be shy about changing the station frequently during your tests. I also find that in order to accurately reproduce this problem the Sansa Fuze v2 should be powered off then on again whenever a new theme or preset list is loaded.

[EDIT: Attached patch for experimenting with AS3543 settings.]

When playing back audio on a Sansa ClipV2 player, there is a regular background noise that’s audible with sensitive headphones and that’s quite annoying during quite music passages. The background noise is a hissing sound that repeats about 4 times per second. The noise can be heard when there is no disk activity and even at very low volume or when playback is muted. It stops as soon as audio is paused.

The noise is not present in the original firmware (OF).

This is a long-known issue, but hasn’t been formally tracked before. It is related to FS#11907, but different in that the background noise is present when there’s no disk (SD) activity. However, I did have the impression that disk activity intensifies the noise.

This item serves to collect the various approaches people have tried to eliminate the noise, and ideas for future exploration.

I ran a series of experiments on the assumption that the audio hardware is misconfigured is some way. I worked through various settings of the AS3543 component based on its datasheet. Here is what I have tried; but nothing helped to eliminate the noise:

* Higher-quality audio settings as proposed in  FS#11304  (AUDIOSET2_HPH_QUALITY_HIGH,
Disabled DAC gain control
Bypassed mixer and disabled mixer gain control (HPH_OUT_R_HP_OUT_DAC, AUDIOSET2_AGC_off,
Mute SDI data
Enable and control DAC attenuation
Disable common mode buffer (phantom ground)
Disabled various unused mixer components (AUDIOSET3_MICMIX_off, AUDIOSET3_ADCMIX_off,
Used external clock source for DAC
Enable headphone detection
Resetting all reserved audio registers to 0

[EDIT: I have attached a patch that allows experimenting with these settings by uncommenting the relevant source lines at compile time or extending the provided debug function to toggle the setting at run time.]

Possible next steps (suggested by various people on IRC):

* As the noise is not present on the other AMSv2 targets (Clip+, FuzeV2), a dump of the AS3543 settings (as3514_regs[] array) on these targets would be helpful. I have attached a patch that adds a debug-menu function for doing this (needs a logf build).

* Someone with a JTAG could read the AS3543 configuration set by the OF.

* The issue could be unrelated to the AS3543; it could be a power-management or frequency-scaling issue.

Also attached: A dump of as3514_regs[] (logf.txt; all values in
I’ve removed the patch to dump these settings; see a later comment in this task for a more up-to-date patch to do this.]

Other ideas?

Sans Clip V2

24bit 96000 Hz 6 Channel (5.1) FLAC files skip to next song after 30 seconds. 30 seconds is an estimate because my screen is broken, so I can’t see what’s happening. I downloaded a daily build 3 days ago, but I think it’s a buffering issue. Flac is 8181 kbps (says Foobar).

It’s the first time I tried these files, so I don’t know if they ever worked, or ever will.
If they never will work, I’m sorry for reporting this.

Thank you all for your time and efforts.