Rockbox

I have an iPod 4G Grayscale (model A1059) running Rockbox 3.14 with an Apple FM remote (model A1187). The remote part works ok (Play/Select and Fwd/Rev buttons work - volume control is separate due to it being connected to the line out, but works).

However, the radio menu does not show up in the main menu when connected. Not when I boot with the remote connected, not when I connect it after booting, and not if I go to a different menu and then back.

In the debugging menu, it simply says that the FM tuner hardware is not found.

I am sure that this used to work at some point. Are there known regressions?

Hi,

I have installed Rockbox build 0F89B04-160628 using this (https://files.freemyipod.org/~user890104/bootloader-ipodclassic.html) method.

I have created a dynamic playlist (Database > long select artist > current playlist > Queue Shuffled). Play and then pause the music and then hold the play button down to shutdown rockbox. Plug in USB cable from your computer (Win10) in to the iPod and the iPod should start powering on and then a white *panic* screen should appear.

Workaround is to have Rockbox already fully booted before plugging in a USB cable from the computer.

I'm having a shutdown issue after using my 6G ipod Classic in the car. After I have turned off the car the ipod will automatically enter a paused state but when i either hold play to shutdown or wait for the idle shutdown it will hang showing the shutting down… text and never turn off. when I manually shutdown the ipod (hold play button) down after using the ipod in the car you can hear the HD spin up and after 4-5 second hear the HD park (click) but still feel the ipod vibrating like the HD is still spinning, the text shutting down… is shown and just stays there and drains the battery. the only way to shut it down it hold menu and select.

In car is a Dension gateway G300 (ipod is connected and controlled with a dock cable, can use car controls to change tracks on ipod apple firmware and rockbox)
I'm currently using using build adaba2b-160820
Installed and tested with both the beta and stable installers from https://files.freemyipod.org/~user890104/bootloader-ipodclassic.html

This is basically a documentation update. For several years I generated accessibility voice files on my devices. Then one day I was reinstalling and it would generate a lot of the voice files but die from a weird error. For more than six months I combed the manual and the forums, trying to figure out what had changed, trying to debug it myself. Eventually I stumbled across the problem. I had noticed the “install on player” option in Rockbox Utility and started generating voice files while running from the player. Once I switched back to running Rockbox Utility by launching the utility from my regular PC disk, everything worked again. I again looked for any warning about this in the manual, and didn’t find anything.

The simplest fix is to include something about this in the section on accessibility and generating voice files.

Another fix, probably not worth it, would be for the voice files to use system tmp space for intermediate files. I suspect that the recursive generation of talk files on player ends up in some infinite regression as it generates talk files for temporary files.

This probably happens on all players, but I only experienced it on the iPod Nano 1st Gen.

I use the attached custom WPS that displays the active Replaygain value and type next to the track number.

When playing mpc files created by foobar2000 with the tracknumber/totaltracks tag format, if the track# is 10 or higher and the applied gain negative (as in the attached mpc), mangled characters are displayed between the gain value and type, eg:

10/12 -2.00 dB *gibberish* (Album)

This is reproducible with the latest simulator build d0fffd6-150104 but I only recently noticed the issue and don't know when it began. I have an old sim build 935d8be-121229 and it works correctly there.

EQ settings changed via Touchscreen WPS action setting_inc & setting_dec are not reflected in the sound output of the device even though they display having been changed in the menus. The changes are also not written to the main config file on disk so they do not "stick" after Rockbox has been rebooted.

example syntax to toggle EQ on/off (display DOES get toggled):
%T(148,520,54,46,setting_dec,eq enabled)
%T(148,520,54,46,&setting_inc,eq enabled)
%xl(E,eq.bmp,0,0)
%V(148,520,54,46,-)
%?St(eq enabled)<%xd(E)|>

I'm not sure if this problem is specific to Android or if the problem applies to all targets.
APK Build: Feb 4, 2011

When playing music sometimes crackling sound exist but after 5-6 secs playing it dissappear
i tried to update until the last rockbox firmware (ver.b045e4d date 2016-11-01) the problem still there

but if i boot to mango (stock fw) no crackling sound remains

Device : Ibasso DX90

Hi there! I'm having a huge problem with the rockbox boot on an iPod classic 5G. I've selected a number of option in the tagcache settings, such as 'load to ram', and after it readed all the files (30GB of music) ask me to reboot, and finally it freezes on the message 'saving tagcache' [1/9], responding only when i press menu+select for reboot. The same for the usb connection. I can't manipulate the files in any way!

Please excuse my limited English. Greetings from Argentina and congratulations for the fantastic project!

I have Rockbox (Development version Revision 9a5f7ce). Rockbox music playback was crystal clear, however after few days of use, a constant static background hiss/static noise can be heard.

would like to report a bug in
i am shuffling through songs and set crossfade to shuffle only it still fades when i do a manual track change this does not happen when i set shuffle
should not occur as there is an option for shuffle and manual track change only, so the two options have the same functionality when i am shuffling it should be able to differentiate between
should be able to register that i have pressed next so the next song should not fade even though it is on shuffle.

Hi, firstly i put Sansa c200 because SansaClip+ is not available in the list.
My player is a Sandisk SansaClip+ bought 6 months ago with an 8Gb class 4 Sandisk microsd (that is currently empty, no songs stored).

Steps to reproduce the issue (after a fresh installation of the Firmware, no settings changed):

1) Switch on
2) → database
3) → track
4) select any track
5) press the central button
6) Erase Dynamic Playlist? is displayed.. Select Yes
7) countdown then starts to play
8) Seek to the next song (it happens at the first seek or might need three, four one after the other)

Data abort
at 30813E44
FSR 0x8
(domani 0, fault 8)
address 0x62E90028

- I installed version 3.10 on top of version 3.09, but later on I tried to uninstall completely 3.10 and reinstall it from scratch and the issue is the same.

- After the crash i have to keep the "switchoff" button pressed for a while.. then I press it again to restart the player and I try to resume the song I get "playlist control file is invalid" or "nothing to resume"

- behavior is the same with or without the SD card

- The issue was randomly happening (but very very rarely) also on the previous version of the firmware (3.09) I got the error a couple of times in 6 months.

The player (Sansa Clip Zip) appears to refuse or unable to play some of my WMA tracks; as far as I can tell, the problem is specific to my WMA Pro files only as it plays none of them (but works with WMA2 successfully). I have attached one of the examples.

I understand that a similar issue was reported recently (in  FS#12619 ) although, in my case, the player doesn’t start playing and skips to the next immediately, rather than playing part of the track.

Sound in all games sounds like chirps or clicks that sounds kinda like the real music on the Nano2G.

Been using Rockbox for years, so it was really obvious when things got messed up somewhere in 3.12~3.13. In a nutshell, with this release, in a 1000+ playlist, I’m listening to the same songs over and over again when shuffle is on. To fix the issue, I have to turn shuffle OFF and then flip it back to ON every time I start a player. Never had this problem before. Don’t know if this affects all devices or just my H340 (yes! still going strong!).

When playing music, I can hear codec errors in the music. It occurs every time on a certain song, and other songs that are smaller in file size, it does not occur on, but occurs on the next one. I believe it is a buffering issue, and makes the music unlistenable. I used the daily on 10/21/2015

On 320kb/s MP3s it occurs much more often, and 128kb/s MP3s it occurs less often, but when it occurs its a series of glitches that distort the music.

I am sure its not the MP3s themselves, because it doesn't occur in the official firmware, and when I rewind it, it does not make the same sound until later. It has a very prominent 'glitchy' sound and later it changes the speed of the song.

I replaced it with the 3.1.3 MP3 codec, and the same glitch occurs.

I do not have a line out so its made through the speaker, but the problem is so bad that you can hear it very clearly.

The MP3 was 320kb/s

Memo is the glitchy one, and Memo-1 is it being played correctly.

I am trying to build Rockbox for Sony NWZ-380 from Git repo, commit ce0b31d87db3c4c1c1bfb535c50770d33e9c4aaf.
arm-elf-eabi-gcc version 5.4.0, ARM binutils 2.30.
Everything goes smooth until just the latest step where this happens:

… LD duke3d.ovl
LD bmp.ovl
LD jpeg.ovl
LD png.ovl
LD ppm.ovl
LD gif.ovl
LD rockbox.elf
/usr/libexec/gcc/arm-elf-eabi/ld: section .ARM.exidx VMA [00000000600a9548,00000000600a954f] overlaps section .bss VMA [00000000600a7f20,00000000600ff773]

I'm using Rockbox on my NWZ-384 for a couple of years now and there were no problems building it in the past. I also was very glad that NWZ-380 port reached stable status in 3.14,
but now something seems to be broken (not terrible it seems, just requires some adjustments to the linker scripts but still).

Steps to reproduce:

1. Start listening to a series of podcasts, say 1-5
2. After listening to >1 plug player into computer during playback of subsequent podcast
3. Delete the podcasts you have already listened to (not what your currently listening to)
4. Eject/Unplug player from computer
5. Attempt to resume playback

This fails for both resume and Recent Bookmarks functionality. I assume this is somehow tied in with playlist support as files from the playlist have been deleted.

Where does Recent Bookmarks keep it's information? Should the bookmark also keep the individual file referenced so it can resume in this case?

Tested on R21184M-090604

Will test on latest version once my main machine is back on internet.

Experienced Results:
I have 2 folders(lets call them FolderA and FolderB) each containing audio files.
FolderA and FolderB are both on the root of my drive
Neither one has a database.ignore file in it.
I go to settings → general settings → database → update now
All files are added to the database as expected
…But i realize i dont want FolderB to show up in the database.
I add a database.ignore file at /FolderB/database.ignore
Then I go back in and update the database again(settings → general settings → database → update now)
all of my audio files still show up in the database(including the ones in FolderB with the database.ignore file)

Expected Results:
After adding the database.ignore file to FolderB and updating the database(settings → general settings → database → update now) the audio files in FolderB should no longer appear in the database

Summery:
Any files in a folder containing a database.ignore file should be removed from the database on update

Rockbox Info:
Build Version: daily / e3cddc2-120701

A couple of config file options are missing from the manual appendix:

e.g.

backlight fade in: 2000
backlight fade out: 10000

Hello!
Not very long ago I got iPod Nano 2 gen 8gb, installed rockbox and encountered this strange behavior:

After pushing and releasing Hold button player doesn't react on wheel. When I'm trying to use some other button(Menu, for example), nothing happens. After third attempt to use a button Rockbox does button context properly, showing me what I wanted to see a few clicks ago. What happens with interface after using Hold? When I return to 'Now playing' screen throughout Menu, all works fine. But right after using Hold button I can't nor increase/decrease volume, neither move in a menu list.

Seen with r27199 on the e200 simulator.

If I place a .wps file in the root directory and “play” it from the file browser, the WPS is not loaded. I’d expect it to load but not to be saved as the setting.

The same file is loaded if it’s in the directory /.rockbox/wps, i.e. it’s not the wrong file contents that’s causing the error.

r28936, sim build for iriver H120, fresh installation folder, i.e. no file “config.cfg”

I modified the function “sim_open” to ouput what files it’s opening, and got the following output (see attached text file). Note that there are files “-.kbd”, “-.sbs” and “-.rsbs”. I think these files should not be opened, even tried.

Today I've experience something which IMO should not happen.

I recorded vian the built in micro on my Sansa e200 v1, paused the recording (not stopped!). In this state, I plugged USB cable. After that, there was the following text in the system font on the display, and the player did not respond to any keys. It had to be restarted via very long pressing at On/Off.

The text is:

*PANIC*

usb_storage_init_connection
(): 00M
pc:0006B878 sp:000D3538

  A: 00069978
  A: 00069F80
  A: 0005326C

bt end

I've reproduced this three time in a row.

I have the official version 3.14 installed.

Using release 3.13 on the clip zip, if I were to put the main crossfeed setting on the right button of the quickscreen, it would cycle through to custom but then stop. If I use the left button of the quickscreen, then after custom there is a data abort crash.

Using build c64b59f-140304, both the left and right quickscreen buttons work to cycle through all 3 settings for crossfeed, but I can still trigger the crash if I use the left button. It seems to be sporadic and timing dependent, because if I click through the options quickly it works fine, but if I slow down and hold the buttons for longer at a time then it will eventually trigger.

Here is a picture of the crash: http://i.imgur.com/wS1CqVr.jpg The text is:
Data abort at 30800E
FSR 0x8
(domain 0, fault 8)
address 0xB00Fb5D
pc:30800BA8 sp:300<snip> the screen is too narrow, here
bt end

Hello

I run rockbox daily (last update 27 Feb 2014) and found an issue that I like to report. I have my sandisk clip zip connected to an external USB hub, which is connected to my notebook. Today I left the sandisk clip zip connected and turned the notebook off. I expected that the player will disconnect from the USB hub → blanks the screen after 20-30 seconds (depending on the setup) and then turns off after a while (depending on the setup). Unfortunately the last step won't happen.

The sandisk clip zip really disconnected from the USB connection (the usb picture disappears from the display) with the notebook going back into the rockbox menu (Play, Radio, Settings, Recording etc.) and after a while also blanks the screen as expected.

Unfortunately it does NOT turn itself off as it would if you leave it entirely unconnected (unwired) with the USB. The sandisk clip zip starts to turn the screen on again after a while, turns off again, turns on again after a while, turns off etc.

I had to plug off the mini USB connection (the wiring between the player and the usb hub) so it turns off and shuts down after a while.

What I believe is, that the USB subroutines might not know the difference between powered on notebook and powered off notebook. It only knows that it's wired and thus tries to turn the player on again after it blanks. It should really be possible to keep the player connected (and wired) when the notebook shuts down and have the player shut down as well (after blanking and then turning itself off).

Could this be reviewed and maybe worked on ?

Thanks so far.

When the dc jack is plugged in to charge while the player is not running (switched off), the display says ‘ATA Error -11’. It can’t be reset except by removing the batteries and dc jack. I ran an older build from last year and it works fine.

Alarm wakeup doesn’t work reliably. It is unclear whether the setup is wrong or the wake up is. It might be that the player wakes up before time because of a small press on the power button and thus somehow forgets about alarm.

The LCD is highly unreliable: sometimes it displays dots and sometimes it stays black.
Example:
http://forums.rockbox.org/index.php?action=dlattach;topic=13462.0;attach=6384;image

Rockbox crashes after USB unplug.

A mixed RTL with LTR text appears in a missed order not conforming to bidi logical to visual algorithm of unicdoe.

Implementation is ready in bidi_l2v() , but the “orientation” parameter is hardcoded and passed as “1” always

A suggested solution is either pass “orientation” as 0 for any RTL text, or tie the orientation parameter with the “alignment” option of the text viewer.

- write a word like “مسمار” in a text file, or just use the word as the file name

- the last character “ر” will appear as the first one like this: “رمسما”

- this bug appeared only since r26019

- when reverting to r26018 the bug won’t show up

- for some combination of letters like “دليل” the issue happens for the last 2 characters

- for some other words the problem doesn’t happen at all

- the only common case is that this happens only with last word in a line appearing on the viewport

The (software-)equalizer is adding high noises to the playback.

I made a recording, the first part with eq enabled the second one with disabled equalizer.

I could also make a test on my older H110, on which I never used the sw-eq though.

With r30907 (and also back to at least r30809 which I tested as well) I experience unneeded mass storage accesses on my iPod nano2G. I do not see this effect on my iPod Video.

Use case:
- Create a playlist from either DB or file browser
- Let buffering finish
- Skip forward track by track
(I use mpc/mp3/aac with embedded album art.)

Effect seen: For some skips I see short flash accesses (much shorter than full rebuffering).

This only happens if dircache is off. With activated dircache this effect is gone.

As such mass storage accesses are severely impacting the battery runtime on HDD targets I hope we get this figured out before v3.10.

If Rockbox is connected via USB with no sd card inserted and it is inserted, it offers the OS to mount the new drive.
If the sd card is removed and reinsterted again, it fails to offer and recognize it.

I could locate the problem in firmware/usbstack/usb_storage.c in the line

if(inserted && check_disk_present(IF_MD(volume))) {

after reinserting the card, check_disk_present fails to return true, so this check fails and the card isn't recognized anymore.

Hello World :)
Attached is a VBR WMA music file, which fails to play correctly on my “RockPod” iPod Nano.
The same file decodes perfectly using the latest ffmpeg build.
Therefore I can only assume there is something about this file which triggers a bug in the Rockbox-specific WMA decoder.
Also attached is a microphone recording of the sound which comes out of my iPod when Rockbox attempts to play the faulty WMA.

I have over 3000 WMA tracks, all encoded using an identical method, all of which will not play correctly in rock box, so if you would like any more examples, or information, please ask.

Thanks for all your help :)
(If there is any way I can help debug/update the code for the wma decoder, please let me know where to start, I understand the C source code pretty well)

~Andrew

rockbox 3.5: ipod doesn’t recognize the connection of usb. i understand that rockbox doesn’t support usb on a 3G ipod, but it would be nice to boot into disk-mode like it does for firewire.

charging isn’t monitored on ipod 3G. it just goes up to 100% very quickly and stays there.

if i format the clip+'s microsd card to contain a DOS partition table, then the vfat formatted partition is not recognized.

if i format the sd card with a vfat fs starting at the first block, then the fs is recognized by rockbox.

** if i then reformat the sd card with a partition table like above, then the second fs i created is still recognized by rockbox, even though the first 512 bytes or so have been clobbered. the result is that rb and my laptop see different fs structures, and clobber each other's metadata, causing corrupt file systems.

the work-around is to dd if=/dev/zero the beginning of the sd card and format without partitions.

i kindly request that rb support dos, or some other, partition table, and maybe that rb doesn't mount fs'es which appear to be clobbered by a partition table. one problem with this change is that some people may be using a clobbered fs without knowing. with such a patch, they could end up seeing a corrupt fs instead.

i don't consider this very high priority. thanks for the awesome firmware!

   I've update my ipod nano 2G to r23629. I found the clickweel would remember the last point my finger leave. And next when I touch the clickwheel, it will make a farward/backward move according to the last point I left, even click the button. Now it is not convenient to type a word with the keyboard inside or setting.
   And my Mac doesn't launch my ipod when I connect my ipod with USB until I change to disk mode. Seems that the USB driver doesn't work.

URGENT/HIGH PRIORITY: Rockbox Firmware 3.7 installed with iRiver H300 1.29J.

Charging when in Rockbox mode (player switched on):

When Rockbox is running and the charger is plugged in, Rockbox can be seen charging the battery in the top left hand corner. When it is fully charged, it shows a full battery.

Charging when iRiver is powered off (player switched off):

When the charger is plugged in, the iRiver begins charging in Original Firmware mode. This is okay as the player charges correctly until Complete.

Booting into OF mode, shows a full battery charge so I can be sure it is fully charged.

However, boot back into Rockbox mode and Rockbox seems to be misreporting the battery charge as depleted - I say misreporting because at this point I know it is actually full/complete. (Booting back into OF mode would also confirm again at this point that there is indeed a full battery charge).

But run Rockbox 3.7 and after a few minutes, a false message - "Low Battery - Shutting Down" appears, after which Rockbox powers off.

I know this is inccorect, because if the battery was so low in OF, the iRiver OF would not even allow you to attempt to power back on (instead it would display a "Low Battery" picture on the display), but I can boot back into OF mode easily with no problems even after this message from Rockbox, again the OF shows a full battery and I can run it for hours with no problem so I know somewhere here there must be a miscommunication/misreading from the battery charge to the Rockbox 3.7 firmware.

Have tested this a number of times to ensure it is a fault and yes it presents itself everytime.

I have experienced a fade in reception with my sansa e260. If I tune to a station, the longer I listen, the more static becomes present until the station is all static. I have found however that if I navigate to another station and go back. The station is clear again. This does not happen on the original firmware and does not seem to be location specific.

So the firmware seems to be seeing a degrading signal, but the signal is not actually degrading. Or perhaps the frequency to which the FM tuner is tuned, begins to deviate until it reaches a point of all static, even though the tuner still displays the original frequency.

Thanks.

Stereo width of >0% can cause stutter in the form of an audible click.

Bypassed by setting stereo width of 0% or monophonic channel configuration.

Expected sorting by artist name, then by album and then by track number, but now all songs by all artists sorting by track names in alphabetical order.

Can't load Rockbox from my SDHC 32 GB A-Data Turbo Class 6.
Get “ATA mount File not found”. Cowon FW loads well.

- What behaviour you are seeing

Rockbox 17612-080523 on an iRiver H340 skips entire tracks, and also skips within tracks, when the battery level falls below 30%

- What behaviour you expected

No skipping.

- How to reproduce the bug

Allow the battery level to fall below 30% and start playing a directory of files. Some files will be skipped, some files will have parts skipped in the middle.

- The SVN revision you are using and if possible the particular SVN revision in which you think the bug was introduced.

17612-080523, no idea when the bug started.

If you need any further info on this bug, please ask and I’ll give more details. I have no other hardware to test whether this behaviour occurs on other Rockbox platforms.

- iaudio
both with 3.8 and build r29635

since 3.8 after a while the display blanks totally, no gui. only restarting the device makes it available again for a short
screen, navigation is basically impossible.

The config caused the iPod to appear frozen (frozen screen) after bootup. The iPod would boot, show the normal boot screen and then created a boot screen mixed with theme settings. Picture: http://imgur.com/E4srA the iPod refuse and refused to mount.

Fix:
1: Boot into recovery diskmode
2: Remove conflicting config.cfg
3: Reboot into normal mode

Playing APE 24/44.1 with harsh noise in different parts of the track. If you decode APE file to WAV using the codec console, then there are no problems. So the matter is in the player’s APE decoder.

At 24/48 everything is fine.

Revision a8758c9 and Stable (3.13)

If you use the Hold Switch to Lock Keys and remove it again to unlock, buttons doesn't work.
Move around with finger at touchpad work. After this bottons work without problems.

Short:
Start Rockbox
Move the curser over Settings (Example)
Move Hold switch to Lock
Move Hold switch to Unlock
Press Middle Button (Doesnt work)
Move around on Touchpad
Press Middle Button (work)

The rockbox behaviour when plugging in a firewire cable is to automatically reboot into disk-mode, preventing charging whilst running rockbox.