Rockbox’s file viewer has a global sort setting.

It would be nice to have a default global sort setting, but also persistent per-directory sort settings.

For my use-case, it makes sense for me to sort my podcast directory by date, but I wouldn’t want that to affect my music directories, which should play files sorted by name.
Whenever I wish to play music, I need to go back to the general settings, and change the sort settings. And when I’m done and wish to listen to podcasts, I have to change it again.

On my X3, it triggers the MIPS equivalent of a segfault. (directory has 792 entries, tried to access it with only 500 allowed)

Rather than crashing outright, I think it would be better to detect this and somehow error out gracefully?

Playing APE 24/44.1 with harsh noise in different parts of the track. If you decode APE file to WAV using the codec console, then there are no problems. So the matter is in the player’s APE decoder.

At 24/48 everything is fine.

I use a 64 GB MicroSD card in my Clip Zip and the stock firmware recognizes it. Rockbox recognizes it in the debug disk info screen and when connected to a computer via USB, I can read and write it through rockbox. However, when I try to access it or when I just check the regular rockbox info, rockbox does not show the SD card, nor can I play music from it.

The bug is also present in the current development version and is overall very similar to this one: https://www.rockbox.org/tracker/11798

I tried reinstalling rockbox and reformatting the SD card, but nothing worked.

I store the album art by putting a folder.jpg file in the album's directory.
Any WPS on other players shows the cover pictures properly if album art is enabled in the theme.

I am aware of caveats like progressive jpgs, that are not supported by RB.

In the attached zip file, there are four directories with a folder.jpg file and a free opus file for demonstration purposes.

All pictures show up fine on my Sansa E200 (v1) using CabbieV2 or lebellium_Samsung-like.
However, on my XduOO x3ii the pictures are not displayed for the examples 1 - 3, but show for example 4.

None of the jpgs are progressive and I cannot figure out a difference between 1-3 and 4.

I don't know how to debug this further myself, but would be happy doing any furter experiments.

This is true for the current dev builds, e.g. b450707955.

Playing 320K MP3s pauses often in Version 3.15 and daily build 7d00533 also UI becomes unresponsive
Version 3.14 or older does not reproduce the issue in either 44 or 48khz sampling rate and same sound options
Is not reproducible under OF or Version 3.15 running on IPOD 6G
seems to be a cpu usage issue as compiling a version of rockbox with much higher than stock CPU clocks seems to alleviate the issue to an extent but there is still occasional pauses that is not present after reverting to 3.14 and stock 80 mhz clock speed.

I am trying to build Rockbox for Sony NWZ-380 from Git repo, commit ce0b31d87db3c4c1c1bfb535c50770d33e9c4aaf.
arm-elf-eabi-gcc version 5.4.0, ARM binutils 2.30.
Everything goes smooth until just the latest step where this happens:

… LD duke3d.ovl
LD bmp.ovl
LD jpeg.ovl
LD png.ovl
LD ppm.ovl
LD gif.ovl
LD rockbox.elf
/usr/libexec/gcc/arm-elf-eabi/ld: section .ARM.exidx VMA [00000000600a9548,00000000600a954f] overlaps section .bss VMA [00000000600a7f20,00000000600ff773]

I'm using Rockbox on my NWZ-384 for a couple of years now and there were no problems building it in the past. I also was very glad that NWZ-380 port reached stable status in 3.14,
but now something seems to be broken (not terrible it seems, just requires some adjustments to the linker scripts but still).

Right now if the voice file fails to load, there’s a splash message but blind users won’t be able to see it.

(usually this happens because they upgraded rockbox without upgrading the voice file too)

It would be useful if we could embed a failsafe voice file, containing only that one prompt, so the user will know what is going on.

Just English for now, though ideally one for every language we support.

(Oh, and a pony too. Please?)

This patch adds an additional menu option to the list of WPS hotkey choices, “Announce Information”. This voices basic information about the player, currently playing file and current tracklist.

This feature reads a simple definition with a single line of no more than 20 characters from the file “announce.cfg” in the .rockbox directory.

This definition consists of a string of single character tokens, each of which announces a particular canned piece of information.

The tokens are:

A - current time
B - elapsed time and total length of the current track
C - current track number and total tracks in playlist
D - battery level as a percentage
E - battery remaining in hours and minutes
F - sleep timer remaining in minutes

If more than one token is specified, more than one piece of information is announced, so:

AB

would announce the time followed by elapsed time and track length

Multiple announcements may be bound to the hotkey by separating one or more groups of tokens with a “:”

A:DF

In this example, the first time the hotkey is pressed, the time is announced. If it is pressed again within 10 seconds, the battery level and sleep timer are announced and so on.

A space between tokens adds a short pause to the announcement.

If no announce.cfg file is present, the time is announced by default.

The patch fix the multiple-language feature, maintaining the same behaviour in interactive and batch mode and with “make reconf”. Now it’s possible to build more than one voice language at once, specifying different engine and option set for each one.
So, running “make voice”, all the selected languages will be built.

To help the comprehension, here it is a batch mode sample:

../tools/configure –target=ipodvideo –ram=64 –type=av –language=italiano,espanol –tts=f,e –voice=lp_diphone –ttsopts=, –encopts=’-q 10 -c 10,-q 5 -c 5’

This is like to run:

../tools/configure –target=ipodvideo –ram=64 –type=av –language=italiano –tts=f –voice=lp_diphone –ttsopts=’ ' –encopts=’-q 10 -c 10’

../tools/configure –target=ipodvideo –ram=64 –type=av –language=espanol –tts=e –voice=lp_diphone –ttsopts=’ ' –encopts=’-q 5 -c 5’

In the first case, I set the language to italian, using festival with voice lp_diphone (female), no further festival options and some manual encoder options.
In the second case, I set the language to spanish, using espeak. Even if I set the voice, the value is ignored, since the selected TTS engine doesn’t use it.

I also added some cosmetics, like some very circumstantial indentation, blank check in rootdir too, simpler numbered menu generation, some terser command pipes.

The patch is applied to r22250.

I don’t know if it’s a really wanted feature, but the word in the script hurt me!

I have an upgraded iPod 5.5 with CF 32Gb installed in CF-ZIF adapter.
Both iTunes & Rockbox are working fine with this setup.

Then I tried to increase the storage space by using mSata SSD 64 GB + mSata-ZIF adapter. iTunes recovered the iPod successfully and it is working just fine. I installed Rockbox latest stable (non-stable latest = same thing) version & after the Rockbox boot-up it reporting an ATA error -11.

I wonder if this can be solved.

Thanks!

I recognize some problem with USB support.

When I’m connecting my player first time, it’s work correct - computer’s mounting device propertly. BUT When I disconnecting it, turn on playing and while music is still playing I’m connecting player once more - Rockbox is crashing and give information about “unidentified instruction at… “. Now player looks like dead - I must reset it and Rockbox start correctly.
When I’m not turning on songs - all works fine.

Sorry for my english…I’m still learining It

Pure i20 does not charge the iPod classic with OS rockbox.
I feel like Rockbox can not recognize interface pure i20 (drivers?)
Through Pure i20 will not play music even if it is in the installed Rockbox in the iPod.(only apple Flash = possible charging/playing via Pure i20)

I own Ipod classic 6G 160GB (flashed rockbox)

Creative ZEN
Daily build: rockbox-creativezen-20170112

Bug description:
When plugging any dummy plastic or a non supported SD card, the device freezes and displays a white screen with a “PANIC” error message.
Plugging a standard SD card works fine.
To restore the system, you have to use a paper clip to do a hardware reset and turn the device on again.

Trying to cross-compile GCC for the ipod with GCC 9.2 I keep running into errors:

In file included from ../../gcc-4.4.4/gcc/diagnostic.h:25,

               from ../../gcc-4.4.4/gcc/tree-mudflap.c:43:

../../gcc-4.4.4/gcc/pretty-print.h: At top level:
../../gcc-4.4.4/gcc/pretty-print.h:310:6: error: ‘cgraph_node’ is not defined as a type

310 |      ATTRIBUTE_GCC_PPDIAG(2,3);
    |      ^~~~~~~~~~~~~~~~~~~~

This would seem to be the same issue as the one described on https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90677

The attached patch against GCC seems to fix the problem for me.

I’m using the latest Dev build for the Fuze+. SanDisk Sansa Fuze+ 5ef1e2d. Same issues experienced in v3.12 stable.

The screen, for lack of a better term, jumps when navigating in upside-down mode.

http://youtu.be/dRfiBtMx2to

This bug is sporatic “the worst kind”, has effected a 4gb fuze+ “foolsh in IRC” and an 8gb fuze+ “DmL in IRC“, but also has been confirmed to be absent from one other 4gb fuze+

Rockboy data aborts on menu key press, when the srceen is rotated left and image is stretched across the whole srceen. Also no matter what key is mapped to the menu entry it will still fail.

It never fails when aspect ratio is maintained with scale or when not scaled at all, and never aborts when rotated right or not at all.

Only four files even mention rotate in the apps/plugins/rockboy/ directory “lcd.c menu.c rockmacros.h and sys_rockbox.c”

Sometimes the failure does not happen and reaching the menu is possible, but the rockboy option file may get written and not allow the user back into the menu later to change the rotate option back. When this happens the option file must be edited or erased to make rockboy work again normally.

space80 is a digital-plate-like reverb effect, i dump it from my soundcard driver and translate it to c code, the original author is stylus02, thanks him for teaching me many things about the dsp theory:)

about the speed:
eats about 21.86MHz cpu on a cowon d2 target

Hacking from Antoine Cellerier’s code for solitaire.c, I put together a rough freecell game.

It currently works for Sansa E200 targets. Others should work once button mappings are done.

This is not heavily tested, so feel free to report or fix any problems you encounter.

Hi all,

Currently for all models, the Morse Code input method can only type lowercased letters. Here I provide a patch which enables people to switch between lower cased and upper cased letters, I implemented this for Fuze and Fuze v2, and further fixes will be provided soon (or someone else want to add some key mapping options into your keymaps?)

The patch (also attached):

Index: apps/action.h

   ACTION_KBD_DOWN,
   ACTION_KBD_MORSE_INPUT,
   ACTION_KBD_MORSE_SELECT,

   /* the following are helper actions for touchscreen targets,

   "abcdefghijklmnopqrstuvwxyz1234567890,.?-@ ";

                       state.morse_code |= 0x01;
               }
               break;

           case ACTION_KBD_SELECT:

                   /* turn off hangul input */
                   state.hangul = false;

               }

               break;

           int morse_code;

           outline[0] = morse_alphabets[i];

           sc->putsxy(x, y, outline);

           morse_code = morse_codes[i];

   { ACTION_KBD_DONE,         BUTTON_UP,                        BUTTON_NONE },
   { ACTION_KBD_ABORT,        BUTTON_HOME|BUTTON_REPEAT,        BUTTON_NONE },
   { ACTION_KBD_MORSE_SELECT, BUTTON_SELECT|BUTTON_REL,         BUTTON_NONE },

   LAST_ITEM_IN_LIST

preamble first :) I am new at the rockbox-project, so this is my first commit. I hope that I am right here with that. If not, please notify, and say, where somewhat would be better.
Strictly speaking this is my first contribition to an opensource-project ever. I am a friend of OSS since years and now I want to give something back ;) I am thinking, rockbox is a nice project to get in the open source scene.

To get in the rockbox-project I tried to improve the jewels-game. First I changed the controls for the Sansa Fuse in the Simulator. The old controls are good for the real Fuse, but very unconfortable at simulator.

Then I wanted jewels to get more difficult with higher levels. To do so I changed it to start with 4 types of jewels only and get one more each three levels till they are 7 types.

Greetings,
Michael

Neither of the tools, ipodpatcher or Rockbox Utility 1.4.0, work on macOS Catalina.

Catalina removed 32bit support.

Using ipodpatcher generates the following error:

bash-3.2$ ./ipodpatcher
bash: ./ipodpatcher: Bad CPU type in executable

And Rockbox Utility has a white circle with a line through it indicating that it does not work with this version of the OS.

(see attached file)

Add an tag to the viewports that allow text/items to be aligned
top/centre/bottom (vertical alignment)

Currently, it is possible to align left/centre/right (horizontal alignment)

The main reason I want to do this is to centre fonts in the middle of a viewport to allow my WPS to allow for multiple fonts - all lined up correctly. I’m sure there can be many other uses

I primarily use my unit for audio books while driving, but the latest build (as I write this) won't play one of the files properly. It tries to start, stuck at 0:00. Trying to seek hangs the player altogether, requiring a hard restart.

I've recreated this problem on a flaky Clip+ and an AGPTek Rocker.

The 'file' tool identifies it as: ISO Media, MP4 v2 [ISO 14496-14]

Here's what mplayer has to say (while playing it back properly):

[lavf] stream 0: audio (aac), -aid 0, -alang eng

Hello there,

When I reboot my Rockboxed iPod nano second generation, it changes the time +5 hours.

Does anyone know why this can be? Thanks

HI, is there a way that you could add a “Single”
playmode, so it stops after playing one song, instead of
repeating all, or repeating single? That way, it could also
be used as an “auto-off”, where it shuts off after one
song. Also, and maybe this isnt possible, but you could
have an option to play X number of songs and then stop,
where the X is configurable.

Back button does not work, and sometimes the same function as the forward button.
Rewind button does not work
Of course, I am talking about are the physical buttons，Touch buttons are working properly。

I would like to run my iPod with its keypad locked all the time, thus I wrote a little patch to an option to disable the settings reset during startup regardless of the hold button's position.

You will find the patch attached to this message. I'm not entirely convinced by the name of the new option (or my wording in general) so if you have a better idea, feel free to rename things.

Reported Version: 3.15 not 3.14

Hello,

I am using a "SanDisk Sansa Clip+" and it seems that currently it is not possible to remove quickscreen entries when they are set, you can only overwrite them.

In the manual chapter "3.15 Quick Screen" has to be adapted, once this function has been implemented.

It would be very nice to have this possibility!

-Ramon

There is an ALAC playback problem in daily builds (since 2014-11). The playback somethimes works for one song but then crashes and shows ALAC file details as "? kbit/s", "0 MHz", "0 MB" and nothing happens when I press the Play button. After reboot the problem occurs again. It makes the ALAC playback impossible.

Now I'm using revision 9cb9f76M-140326 with patches from aroldan:

https://www.dropbox.com/sh/b5xbw6cp4ikfxwn/MjELjmDNJ_

With this build there are no ALAC playback problems.

After upgrading from "Version: 33856d9-161111" to "Version: 6436c6e-170211" Resume Playback from the main menu does not work. Here are the steps taken to verify the problem:

Running Version: 6436c6e-170211… Reset config
Using default settings, enabled Shuffle via Shortcuts
Started playlist; track identified as 1 of 5330
Skipped ahead to the 5th track
Paused @ 1:01
Forced shutdown
Enabled Hold switch
Waited ~1 min., then booted via disengaging Hold switch
Clicked Resume Playback… resumed on the same first track (1 of 5330)
This behavior occurred every time I attempted to Resume Playback.

Restored previous version (Version: 33856d9-161111)
Rebooted
Reset Settings
Using default settings, enabled Shuffle via Shortcuts
Started playlist; track identified as 1 of 5330
Skipped ahead to the 5th track
Paused @ 1:01
Forced shutdown
Enabled Hold switch
Waited ~1 min., then booted via disengaging Hold switch
Clicked Resume Playback… resumed on the fifth track @ 1:01

FWIW: No Bookmarking used (never have). Database not initialized (never use it).

Hi,
I've been using the development version of Rockbox in my ipod classic 6th generation for about two years I think, but from some time, like a month or two, I'm experiencing playback issues as the track I'm listening suddenly skip forward or backward, or even jump for a few seconds on another mp3 file inside the ipod I was just listening before. I don't think is a ipod issue because I can listen the file inside the ipod with my computer player without problems.

There some way I can check older development revisions for the classic? It appears that it doesn't show in the dev build link on the site because is not fully supported. Thanks

Version 9e186e34ab-190820

i have an ipod 7th gen
rockbox installed
140.000 titles

database contains in unpredictable many cases of the folders 2 times the same title
not in all folders, but it happens very often that i open one and i see all titles 2x although they are only 1x on the sd card

the files exist only ONCE
but the database keeps listing them all 2 times

i rebuilt it several times, but the database keeps on doing that

any hint what i can do?

start as apple / itunes and delete rockbox folder / install new did not help

Creative ZEN simulator build 9d0c0e3-170115
Creative ZEN device build 8fec364f6-170125

Steps:

(Using attached config.cfg)

1 Ensure Settings > Playback Settings > Shuffle is No
2 In Files, move to a list of tracks and press Select
3 In Files, move to a different list of tracks and do long Select > Current playlist > Insert
4 View the playlist e.g. http://i.imgur.com/xR0WMQm.png 5 Set Shuffle Yes and then Shuffle No
6 View the playlist

Expected e.g. https://archive.is/41khH#selection-1007.0-1007.44 , https://archive.is/nypDH#selection-1079.0-1092.0:
Playlist order restored.

Observed: Playlist changed, but not restored - http://i.imgur.com/DBW9wSI.png

Video at https://www.youtube.com/watch?v=2_s27g_FwXg

Creative ZEN simulator build 9d0c0e3-170115
Creative ZEN device build 8fec364f6-170125

Steps:

(Asing attached config.cfg)

1 Set Settings, Playback Settings > Shuffle to Yes
2 In Files, enter a folder of tracks and press Select to play
3 Go up to the folder itself, press long select > Current playlist > Insert Last
4 Press long select > Current playlist > Insert
5 Press long select > Current playlist > Insert
6 Go to Now Playing > Current playlist > View current playlist

Expected: Four copies of the list, all shuffled

Observed: One copy of the list, shuffled, followed by three not shuffled: http://i.imgur.com/Emldcdt.png

Video at https://www.youtube.com/watch?v=KANEkz0zRZ8

I am reopening  FS#11501  - Sansa Clip v2 FLAC playback skips regularly, which was closed because a sample file was not provided. I didn't think this was necessary because I stated it happened regularly with just about any file.

I am currently on build 30217. It skipped for me last night on this track:
http://www.archive.org/download/johnbutlertrio2011-07-24.lsdII.flac16/johnbutlertrio2011-07-24_lsdII_t07.flac

I cannot attach the track to this ticket because it is larger than 2mb.

Again, it is nothing inherent in that track: a second playthrough did not skip. That 16-bit/44.1khz track was generated with FLAC 1.2.1b using normal procedures.

This problem has occurred for any build I've ever tried on a clip v2 player.

Here is my original problem statement:

Build 27566 (and all previous builds), Sansa Clip v2.

playback of 16-bit/44khz FLAC format regularly will skip ahead to next track.

in a 60 minute playback session, it'll probably happen 2-3 times. this is not due to a defect in the FLAC files. it happens with any FLAC set I attempt.

this does not happen with the Clip v1 on the same build number.

this is my first bug submitted. I searched for duplicate reports but didn't find anything.

thank you!

Create silence in Audacity program (Generate → Silence). Convert the wav file to ogg vorbis file. Put into the sansa clip+ player wav and Ogg files. Turn on the equalizer and set 32 hz, 64 hz, 125 hz in the 0.5-2.0.
Turn on maximum volume. Listen to the silence of wav file. Absolute silence. Listen Ogg Vorbis file - hear the noise (like the wind). It’s bug with only ogg vorbis. mp3, flac, mp4 is absolute silence.
On a musical files it’s additional noise. Ogg vorbis is economical of disk space. Testing on a sansa clip+ with 2GB.

This patch allows the line out on the Sansa Fuze V2 to be enable/disabled by means of the existing Lineout poweroff setting (previously used on some iPods).

By assigning this setting to the quickscreen I can switch between headphones and lineout after plugging into the dock. Still no luck in finding out how to autodetect the dock.

I'm not 100% sure that re-using the "Lineout Poweroff" setting is the right thing to do here as it's not powering on/off the line-out - just switching between headphones and line out

Whenever screendump is enabled,It gets a panic error.
Error Message:
*PANIC*
Stkov usb
pc:080739ac sp:080f5458

The volume settings are bypassed and is at max volume when the plugin is started. Even when putting it at -60DB it still has sound. After exiting and relaunching the app,the volume is maxed again,regardless of volume settings.

The Case Game

Here is a variant of Deal or No Deal for Rockbox.

26 cases contain random amounts of virtual money. After choosing 1 case for yourself, you open the other cases until the banker makes you an offer to buy your case. If you choose to accept the offer the game ends and you receive that offer as your final score. By declining the offer, you continue to open the remaining cases until the next offer. If you decline all offers you get the amount that was in your case as your final score. If play continues until your down to 1 case plus the case you chose, you are given the option to swap cases.

Gameplay controls:

() While opening cases: pressing UP shows the remaining case amounts.

                      pressing DOWN shows the high scores.

() While deciding on an offer: pressing UP shows the previous offers.

                             pressing DOWN shows the high scores.

This game allows name entries into a high score board.

This game currently only works on color lcd screens (Sansa e200 176×220) or greater.

Apply the patch and place the .bmp files in the “apps/plugins/bitmaps/native/” directory.

Please post results for other platforms as well as comments. I tested the game out on the Gigabeat simulator and it seemed to work well.

Spider solitare game on easy level

uses solitare card suit

try it!

working on color and grayscale targets

I think commit 1654efc31339972d0e6bd41a499fcffc0a45822e introduces the following error:
storage_init in firmware/storage.c does not return an rc error code in case !CONFIG_STORAGE_MULTI
because its discarded here:

#else /* ndef CONFIG_STORAGE_MULTI */
+ STORAGE_FUNCTION(init)();
+#endif /* CONFIG_STORAGE_MULTI */

+ storage_thread_init();

   return 0;

Please refer to forum post for full exchange: http://forums.rockbox.org/index.php/topic,52518.0.html

In summary playing ALAC will crash the unit, other codecs not as much. My reasoning is (as contained in the forum post):

Converting some of my ALAC collection to FLAC to test has given excellent results = no crashes. I am suspicious of the ALAC decoder; watching the VIEW BUFFERING THREAD there seems to be consistency:

OGG/MP3/FLAC/WAV: CPU Frequency goes up to 124 until pcm: becomes full, then drops to 45mhz and pcm: hovers (it is always active) near the top of 100%. Upon track change the cycle starts again (124mhz until pcm: becomes full). I don't seem to get crashes.

ALAC: CPU Frequency goes up to 124 until pcm: becomes full, then drops to 45mhz and pcm: quickly goes down (takes about 2 seconds) to 75%, then cpu switches to 124mhz to get pcm: back up to 100%. This goes on constantly (cpu high - low cycle) while a single track/file is playing. I am now believing this cpu going up and down constantly gives me the crashes. Note on crashes: I don't know when they will happen, sometimes after a minute or two, sometime after 10 minutes , there is no pattern I can tell.

Ordinarily, when Rockbox is shut off and turned back on, it will remember the position in the last-played song, and begin playing from where you left off. However, in the latest build, Rockbox doesn't remember the last track that was playing if the file used a relative path. This happens on every version of 3.14 including the current daily build (2017-11-13).

Here is how the error can be reproduced:

Have a folder with two songs. Then, in the parent folder, create two m3u playlists named "absolute.m3u" and "relative.m3u".
.\
—absolute.m3u
—relative.m3u
—MUSIC\
——song1.ogg
——song2.ogg

In the absolute.m3u playlist, add the following lines:
MUSIC\song1.ogg
MUSIC\song2.ogg

In the relative.m3u playlist, add the following lines:
.\MUSIC\song1.ogg
.\MUSIC\song2.ogg

To see expected behavior:

1.) Open the files list, and run absolute.m3u and song1.ogg begins playing.
2.) Push right to start song2.ogg. Let it play a few seconds in.
3.) Turn off your device by pressing power.
4.) Turn on your device with the power button.
5.) song2.ogg continues to play the same song at the same location as when it was shut off.

To reproduce the bug:

1.) Open the files list, and run relative.m3u and song 1 begins playing.
2.) Push right to start song2.ogg. Let it play a few seconds in.
3.) Turn off your device by pressing power.
4.) Turn on your device with the power button.
5.) song1.ogg plays from the very beginning.

The file format of the songs doesn't seem to matter (I've tested ogg and mp3).

If your Ipod accessory doesn’t work with rockbox, you can report it here.

Please put your device name, Ipod model, and tested rockbox version in your post. If some but not all features work, be sure to mention that in your post.

Edit by rasher:
You should also add your results to this page page: http://www.rockbox.org/twiki/bin/view/Main/IpodAccessories

For any developers who might work on IAP support, please add patches to this task, so potential testers are notified.

I have an iPod 4G Grayscale (model A1059) running Rockbox 3.14 with an Apple FM remote (model A1187). The remote part works ok (Play/Select and Fwd/Rev buttons work - volume control is separate due to it being connected to the line out, but works).

However, the radio menu does not show up in the main menu when connected. Not when I boot with the remote connected, not when I connect it after booting, and not if I go to a different menu and then back.

In the debugging menu, it simply says that the FM tuner hardware is not found.

I am sure that this used to work at some point. Are there known regressions?

On my Sansa c250v1, the starfield plugin crashes at the address 0x01F80394 with a data abort.
It seems that the plugin is attempting to execute data.
Strangely, it does not happen in the simulator.

Click on the music file and die

When using the H300 non-lcd remote to turn on the player (iriver H340) I get the following error message “hold switch on, power off…” (the hold switch is not on).