- Status Unconfirmed
- Percent Complete
- Task Type Bugs
- Category Bootloader
- Assigned To No-one
- Operating System Another
- Severity Low
- Priority Very Low
- Reported Version Version 3.3
- Due in Version Undecided
-
Due Date
Undecided
- Votes
- Private
FS#10427 - MR-100 requires reset if the hold switch is engaged after turn-on but before rockboot loads
This isn't a big problem because the MR-100 won't turn on if the hold switch is already engaged.
But if the user turns on the MR-100 and then engages the hold switch while the M:Robe logo is on the screen, a "Hold switch is on Shutting down…" message is displayed, but it does not shut down.
A reset is required at this point - disengaging the hold switch and holding down the power button in this state does not shut down the MR-100.
I can confirm this issue. Bootloader hangs with "Shutting down" message.