Index: firmware/export/config/gogearhdd1630.h =================================================================== --- firmware/export/config/gogearhdd1630.h (revision 29466) +++ firmware/export/config/gogearhdd1630.h (working copy) @@ -207,7 +207,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY Index: firmware/export/config/ipodmini1g.h =================================================================== --- firmware/export/config/ipodmini1g.h (revision 29466) +++ firmware/export/config/ipodmini1g.h (working copy) @@ -211,7 +211,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY Index: firmware/export/config/samsungyh820.h =================================================================== --- firmware/export/config/samsungyh820.h (revision 29466) +++ firmware/export/config/samsungyh820.h (working copy) @@ -188,7 +188,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY Index: firmware/export/config/samsungyh920.h =================================================================== --- firmware/export/config/samsungyh920.h (revision 29466) +++ firmware/export/config/samsungyh920.h (working copy) @@ -194,7 +194,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY Index: firmware/export/config/vibe500.h =================================================================== --- firmware/export/config/vibe500.h (revision 29466) +++ firmware/export/config/vibe500.h (working copy) @@ -201,7 +201,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY Index: firmware/export/config/ipodvideo.h =================================================================== --- firmware/export/config/ipodvideo.h (revision 29466) +++ firmware/export/config/ipodvideo.h (working copy) @@ -232,7 +232,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY Index: firmware/export/config/ipod4g.h =================================================================== --- firmware/export/config/ipod4g.h (revision 29466) +++ firmware/export/config/ipod4g.h (working copy) @@ -224,7 +224,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this, if you can switch on/off the lineout */ #define HAVE_LINEOUT_POWEROFF Index: firmware/export/config/ipodcolor.h =================================================================== --- firmware/export/config/ipodcolor.h (revision 29466) +++ firmware/export/config/ipodcolor.h (working copy) @@ -209,7 +209,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this, if you can switch on/off the lineout */ #define HAVE_LINEOUT_POWEROFF Index: firmware/export/config/iriverh10_5gb.h =================================================================== --- firmware/export/config/iriverh10_5gb.h (revision 29466) +++ firmware/export/config/iriverh10_5gb.h (working copy) @@ -184,7 +184,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY Index: firmware/export/config/tatungtpj1022.h =================================================================== --- firmware/export/config/tatungtpj1022.h (revision 29466) +++ firmware/export/config/tatungtpj1022.h (working copy) @@ -144,7 +144,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ //#define HAVE_HOTKEY Index: firmware/export/config/iriverh10.h =================================================================== --- firmware/export/config/iriverh10.h (revision 29466) +++ firmware/export/config/iriverh10.h (working copy) @@ -196,7 +196,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY Index: firmware/export/config/samsungyh925.h =================================================================== --- firmware/export/config/samsungyh925.h (revision 29466) +++ firmware/export/config/samsungyh925.h (working copy) @@ -192,7 +192,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY Index: firmware/export/config/mrobe100.h =================================================================== --- firmware/export/config/mrobe100.h (revision 29466) +++ firmware/export/config/mrobe100.h (working copy) @@ -207,7 +207,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY Index: firmware/export/config/ipodnano1g.h =================================================================== --- firmware/export/config/ipodnano1g.h (revision 29466) +++ firmware/export/config/ipodnano1g.h (working copy) @@ -206,7 +206,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this, if you can switch on/off the lineout */ #define HAVE_LINEOUT_POWEROFF Index: firmware/export/config/ipodmini2g.h =================================================================== --- firmware/export/config/ipodmini2g.h (revision 29466) +++ firmware/export/config/ipodmini2g.h (working copy) @@ -214,7 +214,7 @@ /* DMA is used only for reading on PP502x because although reads are ~8x faster * writes appear to be ~25% slower. */ -#define HAVE_ATA_DMA +/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */ /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY