Index: firmware/target/arm/as3525/sd-as3525v2.c
===================================================================
--- firmware/target/arm/as3525/sd-as3525v2.c	(revision 29645)
+++ firmware/target/arm/as3525/sd-as3525v2.c	(working copy)
@@ -546,32 +546,6 @@
 #endif
     /*  End of Card Identification Mode   ************************************/
 
-    if (sd_v2)
-    {
-        /* Attempt to switch cards to HS timings, non HS cards just ignore this */
-        /*  CMD7 w/rca: Select card to put it in TRAN state */
-        if(!send_cmd(drive, SD_SELECT_CARD, card_info[drive].rca, MCI_RESP, &response))
-            return -7;
-
-        if(sd_wait_for_tran_state(drive))
-            return -8;
-
-        /* CMD6 */
-        if(!send_cmd(drive, SD_SWITCH_FUNC, 0x80fffff1, MCI_RESP, &response))
-            return -9;
-
-        /* This delay is a bit of a hack, but seems to fix card detection
-           problems with some SD cards (particularly 16 GB and bigger cards).
-           Preferably we should handle this properly instead of using a delay,
-           see also FS#11870. */
-        sleep(HZ/10);
-
-        /*  We need to go back to STBY state now so we can read csd */
-        /*  CMD7 w/rca=0:  Deselect card to put it in STBY state */
-        if(!send_cmd(drive, SD_DESELECT_CARD, 0, MCI_NO_RESP, NULL))
-            return -10;
-    }
-
     /* CMD9 send CSD */
     if(!send_cmd(drive, SD_SEND_CSD, card_info[drive].rca,
                  MCI_RESP|MCI_LONG_RESP, card_info[drive].csd))