All Projects

IDProjectTask TypeCategorySeveritySummaryOpened
 11804 RockboxBugsID3 / meta dataLow metadata parser hangs on RM file with Sipro audio 2010-12-10 Task Description

Found in R28784, but has existed as an issue for me for as long as i recall. I only just recently got fully annoyed that i couldn’t build the database on my 120gb beast.

It turns out that for some reason there was an RM video/audio file included in my audiobooks folder that was causing the hang.

Available for testing at http://alhaz.fttp.xmission.com/2003-12-26.rm - apologies that it is about 42 megabytes.

 10486 RockboxBugsLCDLow fuze screen not drawn correctly on backlight turn-on if ...2009-08-032 Task Description

Reported on r22090 but I suspect I’ve seen it on every build I’ve run on my fuze.

Probably related to the code that disables updates to the wps if the backlight is off on targets that are unreadable without the backlight. I haven’t been able to determine what version that was first added in.

“first buttonpress enables backlight only” is enabled but may not be related.

If the playlist completes while the backlight is off, upon first buttonpress what is shown is the last state of the WPS before the backlight turned off - sometimes partially overwritten with scrolling text, for example if there are long filenames in the file browser.

 10474 RockboxBugsFM TunerLow FM tuner on Gigabeat S fails to tune last frequency on  ...2009-07-30101 Task Description

in r22084 and some previous versions (I know I’ve noticed it before) the FM tuner is not tuned when the tuner function is launched.

The frequency is remembered from the last time the fm tuner was used, but only static is heard until i seek in either direction and back to the frequency.

This behavior on the Gigabeat S differs from the way the fm tuner behaves on other targets.

10427RockboxBugsBootloaderLowMR-100 requires reset if the hold switch is engaged aft...2009-07-101 Task Description

This isn't a big problem because the MR-100 won't turn on if the hold switch is already engaged.

But if the user turns on the MR-100 and then engages the hold switch while the M:Robe logo is on the screen, a "Hold switch is on Shutting down…" message is displayed, but it does not shut down.

A reset is required at this point - disengaging the hold switch and holding down the power button in this state does not shut down the MR-100.

10106RockboxBugsBattery/ChargingLowClicking noise on Gigabeat S only when battery is fully...2009-04-081 Task Description

Currently running r19940 but there doesn’t seem to have been any chage in the power code for the gigabeat S recently.

The issue is that there is a regular clicking noise heard if DC power is connected while the battery is fully charged. This noise is not heard while the battery is charging. The same power adapter doesn’t cause the same noise on an F.

 9803 RockboxBugsUser InterfaceLow Conflict between Car Adapter Mode and First Buttonpress ...2009-01-152 Task Description

Build R19503_081220 on Gigabeat F.

With both “Car Adapter Mode” and “First Buttonpress Enables Backlight Only” enabled, if the gigabeat is booted on battery power and then DC power is applied, the “first buttonpress” functionality persists even though the backlight is always on - the first buttonpress after the (now cancelled) backlight timeout is just thrown away.

If i power up the gigabeat with DC already applied, it behaves normally.

Showing tasks 1 - 6 of 6 Page 1 of 1

Available keyboard shortcuts

Tasklist

Task Details

Task Editing