All Projects

IDProjectTask TypeCategorySeverity  descSummaryOpened
 11955 RockboxBugsID3 / meta dataHigh Corrupted metadata as of r29350 2011-02-2153 Task Description

Hello. I want to report that metadata display is broken on r29350 on my FuzeV2. It shows some random buffer, sometimes text, sometimes GUIDs, sometimes ‘boxes’. The problem is not present in r29348.
Rebuilding the database fails with data abort at 30800530 address 0x646c6f47. I checked the map file and 30800530 is inside strlen.
13063RockboxBugsRecordingMediumVolume triggered recording fails to stop2016-01-09 Task Description

Hi,
I’m trying to record myself playing the guitar using my old, trusty FuzeV2 (both a very old version - sorry didn’t wrote it down but had to be at least a couple of years ago - and today’s version 87229a4). Recording parameters as follows:

Trigger: Repeat
TrigType: New file
Prerecord Time: 1s
Start Above: -22dB
for at least: 1s
Stop Below: -26dB
for at least: 1s
Presplit Gap: 1s (don’t really understand what it does from the manual, but it says it usually has to be the same value of the Stop Below Time, so…)

Recording starts correctly when noise is detected according to conditions; then apparently it correctly detects the silence and stops the recording. But immediately the ‘Repeat Trigger’ parameter kicks in and _immediately starts a new recording_. At this point, the trigger status and the recording status aren’t matching anymore. The recording screen shows the recording file size growing, but the Trigger status is ‘Ready’. I have confirmed that on the actual file on disk the silence is meanwhile recorded.

Did I understand any of the parameters wrong or has anybody else the same problem?
 11415 RockboxBugsGamesLow Data Abort starting Jewels plugin 2010-06-182 Task Description

Hello, I just had a Data Abort while starting the Jewels game:

Data abort
at 3014F900
FSR 0×8 (domain 0, fault 8)
address 0xFFFFFFFD

My player is a Sandisk Sansa FuzeV2 with r26894 + some audio related patches (volume boost, frequency switching, bertrik’s audio quality improvement using PLL B). The crash is reproducible by simply starting the jewels plugin.
 11713 RockboxBugsUser InterfaceLow Next Track indicator not working reliably 2010-11-022 Task Description

Player Type: FuzeV2 (currently missing in the Player Type drop down list)
Reported Version: r28442
WPS: CabbieV2

The Next Track label in the WPS often goes out of sync. It’s easy to reproduce by skipping three or four songs waiting a couple of seconds between skips. The Next Track shows the same track as the playing one and it stays like that until backlight fades off. When moving the wheel to turn the display on again it shows the correct track.
First I thought it was due to metadata unknown until buffering, but I tried changing the WPS definition to show only the file name and it causes the problem too. Also, since the player is Flash based I suppose it shouldn’t take more than 10seconds (backlight timeout) to buffer the next track metadata.
Sometimes a single track skip is enough to trigger the problem, but it does not happen every single time. Maybe it could be a timing issue with the “update screen” signal?

Thanks in advance
Showing tasks 1 - 4 of 4 Page 1 of 1

Available keyboard shortcuts

Tasklist

Task Details

Task Editing