Creative Zen Mozaic
Overview
This is the page for the Creative Zen Mozaic device. See
CreativeZENMozaicPort for more information about the port.
Hardware
The Creative Zen Mozaic features 11 buttons: 4 directional arrows, ok, back, options, shortcut, play, reset and power. It also has a hold button. It also features a speaker. The following chips can be found on the PCB:
- STMP3700 (see SigmaTelSTMP3xxx or STMP37xxChips), see the SansaFuzePlus page for more information (it's not exactly the same SoC, it's an older version of the STMP3780 aka i.MX 233)
- TEA576UK fm tuner
- LCD is 128x160 TFT and seems compatible with FGD0801 except that it uses a couple more registers
- probably a Phison SD to NAND bridge
- probably NAND chips
PCB Scans
Unfortunately all the interesting chips are under the battery and unreachable.
Pins
Here is a list of all the pins used by the OF. Pins are of form BxPyy where x is the bank and yy the number within the bank. Direction only applies to GPIO.
Pin |
Dir |
Comment |
B0P01 |
ssp2_d1 |
|
B0P02 |
ssp2_d2 |
|
B0P03 |
ssp2_d3 |
|
B0P10 |
OUT |
unused (ssp1 gate) |
B0P12 |
OUT |
speaker gate |
B0P20 |
ssp2_cmd |
|
B0P23 |
ssp2_sck |
|
B1P00 |
lcd_d0 |
|
B1P01 |
lcd_d1 |
|
B1P02 |
lcd_d2 |
|
B1P03 |
lcd_d3 |
|
B1P04 |
lcd_d4 |
|
B1P05 |
lcd_d5 |
|
B1P06 |
lcd_d6 |
|
B1P07 |
lcd_d7 |
|
B1P12 |
OUT |
backlight enable |
B1P16 |
lcd_reset |
|
B1P17 |
lcd_rs |
|
B1P18 |
lcd_wr |
|
B1P19 |
lcd_rd |
|
B1P20 |
lcd_enable |
|
B2P00 |
IN |
usb related ? |
B2P01 |
duart_tx |
backlight |
B2P02 |
pwm2 |
led, red |
B2P05 |
i2c_scl |
|
B2P04 |
pwm4 |
led, green |
B2P06 |
i2c_sd |
|
B2P07 |
IN |
button down |
B2P08 |
IN |
jack detect |
B2P14 |
ssp2_d0 |
|
B2P15 |
OUT |
tuner gate |
--
AmauryPouly - 28 May 2013
Copyright © by the contributing authors.