Creative ZEN X-Fi Style
Overview
This is the page for the Creative ZEN X-Fi Style device.
Port status
See
CreativeZENXFiStylePort?.
Hardware
Device I/O
- Input
- buttons: (on front:) Menu/Back, Options, up, left, OK, right, down, My Shortcut, Play/Pause, (on bottom) reset, (on top:) On/Off/Lock (one-way push button, in contrast to other ZEN models)
- microphone
- Output:
- display
- earphone jack and A/V out (on a single connector)
- Input/output: USB port
Internals
The following chips can be found on the PCB:
Recovery Mode
The ZEN X-Fi Style features two recovery modes:
- Creative recovery mode: can be access by holding the back button while powering on
- Sigmatel hardware recovery mode: hold the select button while plugging the USB cable (from a power off state)
PCB Photos
Pins
Here is a list of all the pins used by the OF. Pins are of form BxPyy where x is the bank and yy the number within the bank. Direction only applies to GPIO.
Pin |
Dir |
Comment |
B0P00 |
ssp_d0 |
|
B0P01 |
ssp_d1 |
|
B0P02 |
ssp_d2 |
|
B0P03 |
ssp_d3 |
|
B0P04 |
ssp_d4 |
|
B0P05 |
ssp_d5 |
|
B0P06 |
ssp_d6 |
|
B0P07 |
ssp_d7 |
|
B0P11 |
IN |
power button |
B0P12 |
OUT |
speaker gate |
B0P14 |
IN |
button (which one ?) |
B0P20 |
ssp_cmd |
|
B0P24 |
ssp_sck |
|
B1P00 |
lcd_d0 |
|
B1P01 |
lcd_d1 |
|
B1P02 |
lcd_d2 |
|
B1P03 |
lcd_d3 |
|
B1P04 |
lcd_d4 |
|
B1P05 |
lcd_d5 |
|
B1P06 |
lcd_d6 |
|
B1P07 |
lcd_d7 |
|
B1P08 |
lcd_d8 |
|
B1P09 |
lcd_d9 |
|
B1P10 |
lcd_d10 |
|
B1P11 |
lcd_d11 |
|
B1P12 |
lcd_d12 |
|
B1P13 |
lcd_d13 |
|
B1P14 |
lcd_d14 |
|
B1P15 |
lcd_d15 |
|
B1P16 |
lcd_d16 |
|
B1P17 |
lcd_d17 |
|
B1P18 |
lcd_reset |
|
B1P19 |
lcd_rs |
|
B1P20 |
lcd_wr |
|
B1P21 |
lcd_cs |
|
B1P26 |
IN |
usb related ? |
B1P30 |
pwm4 |
backlight |
B2P07 |
IN |
headphone detect |
B2P08 |
IN |
lcd model detect |
--
MohamedTarek - 26 Jan 2013
Copyright © by the contributing authors.