Olympus m:robe MR-100 Info

---

Board scans

Main Unit - Front

Larger image: (1112x2112, 5.57 MB)

1. Power switch
2. Battery connector
3. Connector for headphone daughterboard
4. Microdrive connector
5. Hold switch
6. Dock/proprietary usb connector
7. Reset switch

See OlympusMR100HardwareComponents for chip info.

---

Main Unit - Back

Larger image: (1152x2090, 4.41 MB)

1. LCD connector
2. Touch pad connector
3. Dock/proprietary usb connector

---

LCD

This is front of the LCD. On the connector ribbon is printed:

TSE2399FPC-11
04-52
TRULY-1

Truly Semiconductor makes four 128x160 LCDs: http://www.trulysemi.com/eng/prod.asp?typeID=30&search=no

This is back of the LCD. You can see the 4 red LEDs.

Behind the LCD is a casing that evenly distributes the LED lighting for the LCD. There's a reflective sheet stuck on the back of this case on which is printed "P-TG2399 (PBF433)" and a date.

---

Synaptics Touchpad

Larger image: (1060x1015, 2.41 MB)

J1 is the connector to the main board.

There are 7 red LEDs labeled D1-D7.

A plastic frame that fits over the board has been removed. This frame contains elements that distribute the led light evenly over each button opening (and maybe is required for touch detection).

Synaptics documentation: http://www.synaptics.com/support/dev_support.cfm

---

Seagate Microdrive

Model: ST650211FX