|
|||||||||||||||||||||||||||||||||||
Sansa Repair GuideRepair a broken headphone jack contactLateral forces on a Sansa E200 headphone jack (female) may eventually cause one (or more) jack contacts to break away from the PC board. (This could occur on other similar devices. Thus, similar repair principles may apply.) There are the three typical connections provided for a 1/8" stereo headphone plug via the Sansa headphone jack: With the Sansa headphone jack pointing upward (Sansa oriented with scroll-wheel below display) the contacts on the BACK of the PC board are, from top to bottom, common, right, & left. This article only addresses detachment of the left channel (bottom-most contact) jack pad from the pc board. The left channel (bottom) jack pad needs to be connected to the bottom of the SMD resistor immediately above the jack pad on the back of the PC board.![]() ![]()
r5 - 02 Apr 2021 - 20:46:07 - UnknownUser
Copyright © by the contributing authors.
|